Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 111
Adjusting position automatically
1) Press as to select [AUTO SETUP].
2)  
Press the  button.
 fThe 

[AUTO SETUP] screen is displayed.
3)
 
Press 
 as to select [POSITION ADJUST].
4)
 
Press 
 qw to switch the item.
[ON] Adjust the screen position and size when automatic setup is executed.
[OFF] Does not perform automatic adjustment.
Adjusting signal level automatically
1) Press as to select [AUTO SETUP].
2)  
Press the  button.
 fThe 

[AUTO...

Chapter 4 Settings — [DISPLAY OPTION] menu
112 - ENGLISH
6) Press qw to switch the item.
 fThe items will switch each time you press the button.
[ENABLE] Switches to the secondary input automatically when the input signal for \
primary input is disrupted.
[DISABLE] Disables the automatic input switching function.
Note
 fThe backup function is enabled when [BACKUP  INPUT MODE] is set to [ON] or [1], and same signal is input to the  terminal and 
the  terminal.
Alternatively, the backup function is enabled...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 113
 fThis may not function properly depending on the signal. fUsage of each input signal is displayed in [RGB1] and [RGB2], in [HDMI] and [DVI-D], and in [SDI1] and [SDI2] of the  [SIMUL
 INPUT 
SETTING] screen when [AUTO(3D)] or [AUTO(2D)] is set.
[SIMUL INPUT SETTING] Usage of the input signal Details
[AUTO(3D)] [LEFT INPUT]
Uses the signal for the corresponding input as a signal for the left 
eye image.
[RIGHT INPUT] Uses the signal for the...

Chapter 4 Settings — [DISPLAY OPTION] menu
114 - ENGLISH
[DEFAULT]Standard setting.
[SCREEN FIT]
*1Changes EDID data according to the [SCREEN FORMAT] setting.
[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
*1 Only for PT-DZ21K2, PT- DS20K2, PT- DZ16K2
 fWhen [DEF AULT] or [SCREEN FIT] is selected, proceed to Step  10).
6)
 
Press the  button.
 f The 

[RESOLUTION] screen is displayed.
7)
 
Press 
 asqw  to select [RESOLUTION].
 fSelect [1024x768p], [1280x720p], [1280x768p],...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 115
Note
 fThe optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the 
external device regarding the output of the external device.
 fThe data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” ( x

  page   209) for a resolution that 
supports plug and play.
Setting [EDID MODE]
1) Press  as to select [DVI-D IN].
2)  
Press the...

Chapter 4 Settings — [DISPLAY OPTION] menu
116 - ENGLISH
3) Press as to select [SIGNAL LEVEL].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO] Automatically sets the signal level.
[64-940] Select this item when the signal output from the HDMI terminal of an external device (such as a Blu-
ray disc player) is input to the  terminal.
[0-1023] Select this item when the signal output from the DVI
- D terminal of an external device (such as a 
computer) is...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 117
 fA signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or video 
device.
[DIGITAL LINK IN]
Sets the signal level when DIGITAL LINK input is selected.
1)
 
Press 
 as to select [DIGITAL LINK IN].
2)
 
Press the  button.
 fThe 

[DIGITAL LINK IN] screen is displayed.
3)
 
Press 
 as to select [SIGNAL LEVEL].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time...

Chapter 4 Settings — [DISPLAY OPTION] menu
118 - ENGLISH
10) Press the  button.
 fThe confirmation screen is displayed.
1

1)  
Press 
 qw to select [OK], and press the  button.
Note
 f The setting details are displayed in [RESOLUTION] and [VER TICAL SCAN FREQUENCY] of [EDID STATUS]. fThe resolution and vertical scanning frequency settings may also be required on your computer or video device. fAfter configuring settings, your computer or video device or the projector may be required to be turned of f...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 119
[AUTO]Automatically select [12-bit] or [10-bit].
[12-bit] Fixes to [12-bit].
[10-bit] Fixes to [10-bit].
Setting [3G-SDI MAPPING]
1) Press as to select [SDI IN].
2)  
Press the  button.
 fThe 

[SDI IN] screen is displayed.
3)
 
Press 
 as to select [3G-SDI MAPPING].
4)
 
Press 
 qw to switch the item.
[AUTO] Automatically select [LEVEL A] or [LEVEL B].
[LEVEL A] Fixes to [LEVEL A].
[LEVEL B] Fixes to [LEVEL B].
Note
 fThis does not operate when...

Chapter 4 Settings — [DISPLAY OPTION] menu
120 - ENGLISH
[OFF]Does not rotate the screen.
[CLOCKWISE] Rotates the screen by 90° clockwise.
[COUNTERCLOCKWISE] Rotates the screen by 90° counterclockwise.
Setting [OSD DESIGN]
Set the color of the menu screen (OSD).
1)
 
Press 
 as to select [ON-SCREEN DISPLAY].
2)
 
Press the  button.
 fThe 

[ON-SCREEN DISPLAY] screen is displayed.
3)
 
Press 
 as to select [OSD DESIGN].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the...