Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 141
Note
 f[PROGRESS] is displayed in the menu during lens calibration.  The operation cannot be canceled during calibration. fWhen lens calibration executes correctly
, [COMPLETE] is displayed and [INCOMPLETE] is displayed when it does not execute correctly .
 fPressing the  button on the remote control for at least three seconds will also display the confirmation screen for lens calibration 
execution.
[LENS MEMORY]
Save and load the focus position,...

Chapter 4 Settings — [PROJECTOR SETUP] menu
142 - ENGLISH
2) Press the  button.
3)  
Press 
 as to select [LENS MEMORY EDIT].
4)
 
Press the  button.
 fThe 

[LENS MEMORY EDIT] screen is displayed.
5)
 
Press 
 as to select [LENS MEMORY DELETE].
6)
 
Press the  button.
 fThe 

[LENS MEMORY DELETE] screen is displayed.
7)
 
Press 
 as to select the item to delete, and press the  button.
8)
 
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
Changing the lens...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 143
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory of the projector.
1)  
Press 
 as to select [LOAD ALL USER DATA].
2)
 
Press the  button.
 fThe 

[SECURITY PASSWORD] screen is displayed.
3)
 
Enter a security password and press the  button.
4)

 
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
Note
 f The projector enters the standby mode to reflect the...

Chapter 4 Settings — [P IN P] menu
144 - ENGLISH
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two images simultaneously .
1)  
Press 
 as to select [P IN P MODE].
2)
 
Press the  button.
 fThe 

[P IN P MODE] screen is displayed.
3)
 
Press 
 as to select a...

Chapter 4 Settings — [P IN P] menu
ENGLISH - 145
16) Press qw to switch the item.
[MAIN WINDOW] The main window has display priority.
[SUB WINDOW] The sub window has display priority.
Note
 fThe P IN P function may not be available for some signals being input or terminals being selected. Refer to “Two-window display 
combination list” ( x
  page   207) for details.
 fImages in the combination of DIGIT

AL LINK and other inputs cannot be displayed in P IN P.
 fThe main window setting values are applied...

Chapter 4 Settings — [TEST PATTERN] menu
146 - ENGLISH
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input 
signal before performing various adjustments.
1)
 
Press 
 qw to switch the [TEST PATTERN]...

Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 147
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
 rRegistered signal details
A1 (1-2)
When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number
Memory number:
 f
A name can be set for each sub memory (x   page   149).
Registering new signals
After a new signal is input and the  button on the remote...

Chapter 4 Settings — [SIGNAL LIST] menu
148 - ENGLISH
3) Press the  button.
 fThe selected signal will be deleted.
Note
 f A registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press  asqw to select the signal to protect.
2)  
Press the  button.
 fThe 

[REGISTERED SIGNAL STATUS] screen is displayed.
3)
 
Press the  button.
 fThe 

[REGISTERED SIGNAL SETUP] screen is displayed.
4)
 
Press 
 as to select...

Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 149
 fWhen a signal to be input corresponds to multiple signals set in [WIDE], a registered signal with a high memory number receives priority . 
Example: a signal to be input that corresponds to memory numbers  A2, 
A4 and B1 will be determined to be B1.
 fWhen a registration signal is deleted, the settings are also deleted. fIn an environment where multiple types of signals are input to the same \
terminal, signals are sometimes not determined correctly...

Chapter 4 Settings — [SECURITY] menu
150 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
 fWhen the projector is used for the first time
Initial password: Press  awsqawsq in order

, and press the  button.
Attention
 f When you select the [SECURITY] menu and press the  button, entering a password is required. Enter the preset password and...