Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 131
When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [AUTO] and [LINK] is set to [OFF]
The screen shows the status of the brightness control in one projector.
5
1
6
RETURN
LINK
PROJECTOR OFF
BRIGHTNESS CONTROL STATUSMENU
When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [AUTO] and [LINK] is set from [GROUP A] to 
[GROUP D]
The screen shows the status of the brightness control of synchronized projectors (up to eight units), including the...

Chapter 4 Settings — [PROJECTOR SETUP] menu
132 - ENGLISH
 rError details
Error message Measures to take
[Exceed maximum number of 
projectors.]
 f Limit the number of projectors in one group to eight.
 fT

o synchronize nine or more projectors, use a PC and the dedicated software “Multi Monitoring & 
Control Software”
*1.
[Please check the COMMAND 
CONTROL setting.]
 f Set [NETWORK CONTROL]  →

 [COMMAND CONTROL] to [ON] for the projector in error.
 fSet [NETWORK CONTROL]  →

 [COMMAND PORT] of all...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 133
[STANDBY MODE]
Set the power consumption during the standby.
1) 
Press 
 as to select [STANDBY MODE].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[NORMAL] Select this item to use the network function during standby.
[ECO] Select this item to reduce power consumption during standby.
Note
 fWhen [ECO] is set, the   AC voltage monitor function, the network function, the  terminal, and part of the RS -...

Chapter 4 Settings — [PROJECTOR SETUP] menu
134 - ENGLISH
5) Press as to select a command number, and press the  button.
 fY

ou can change the page using  qw.
6)
 
Press 
 asqw to select [TIME], and press the  button.
 fThe projector is in the adjustment mode (the time is blinking).
7)

 
Press 
 qw to select “hour” or “minute”, and press as or the number ( - ) buttons to set a 
time, and then press the  button.
8)
 
Press 
 asqw to select [COMMAND].
9)
 
Press the  button.
 fThe 

[COMMAND] detailed...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 135
 fIf multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command 
number
.
 fThe operating time will be the local time. ( x

  page   139)
 fIf an operation is executed with the remote control or control panel of the projector or with a control command before the command set in 
[SCHEDULE] is executed, the command set with the schedule function may not be executed.
[INITIAL...

Chapter 4 Settings — [PROJECTOR SETUP] menu
136 - ENGLISH
3) Press as to select [INPUT SELECT].
4)  
Press 
 qw to switch the item.
[PROJECTOR] Performs the RS - 232C communication with the  terminal of the projector.
[DIGITAL LINK] Performs the RS
- 232C communication via the optional DIGITAL LINK output supported device (Model 
No.: ET
-

YFB100G, ET
-
 YFB200G) and the  terminal.
5) Press as to select [(IN) BAUDRATE].
6)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 137
5) Press as to select [GROUP].
6)  
Press 
 qw to switch the item.
[A] - [Z] Controls multiple projectors simultaneously by sending the ID of RS - 232C. You can set groups from 
[A] to [Z]. The projector responds when the ID of RS - 232C matches the setting.
7) Press as to select [RESPONSE(ID GROUP)].
8)  
Press 
 qw to switch the item.
[ON] Returns the response when an ID is designated as GROUP.
[OFF] Does not return the response when an ID is...

Chapter 4 Settings — [PROJECTOR SETUP] menu
138 - ENGLISH
[UPGRADE]*2[ET-UK20]Displays the activation status by the Upgrade Kit (Model No.: 
ET-
UK20).
[ET-CUK10] Displays the activation status by the Auto Screen Adjustment 
Upgrade Kit (Model No.: ET
-

CUK10).
[ON COUNT] [POWER ON TIMES]
Displays the number of times the power is turned on.
[LAMP1 ON] - [LAMP4 ON] Displays the number of times the lamp is turned on.
[SHUTTER] Displays the number of times the shutter is closed.
[SIGNAL INFORMATION]...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 139
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[DISABLE] Disables the No signal shut-off function.
[10MIN.] - [90MIN.] Sets the time in increments of 10 minutes.
[REMOTE2 MODE]
You can set the  terminal.
1)
 
Press 
 as to select [REMOTE2 MODE].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[DEFAULT]
Uses pin assignment of the  terminal in standard setting. ( x...

Chapter 4 Settings — [PROJECTOR SETUP] menu
140 - ENGLISH
Setting the date and time manually
1) Press as to select [DATE AND TIME].
2)  
Press the  button.
 fThe 

[DATE AND TIME] screen is displayed.
3)
 
Press 
 as to select [ADJUST CLOCK].
4)
 
Press the  button.
 fThe 

[ADJUST CLOCK] screen is displayed.
5)
 
Press 
 as to select an item, and press qw to set the local date and time.
6)
 
Press 
 as to select [APPLY], and press the  button.
 fThe setting of the date and time will be completed....