Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 151
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
 fTo create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA Y SETTING].
1)  
Press...

Chapter 4 Settings — [SECURITY] menu
152 - ENGLISH
4) Press the  button.
 fThe 

[CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
5)
 
Press 
 as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
 
Press 
 qw to switch [USER].
7)
 
Press 
 as to select the button item to set.
 fWhen [INPUT

 SELECT BUTTON] is selected, press the  button, and then press as to select 
the button to set.
Buttons that can be set
[CONTROL PANEL] [REMOTE CONTROL]
[POWER BUTTON] Power standby  button, power...

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 153
3) Press asqw to select the text, and press the  button to enter the text.
4)  
Press 
 asqw to select [OK], and press the  button.
 fT

o cancel, select [CANCEL].
Attention
 f The initial password is “AAAA” by the factory default or when [ALL  USER DA TA] in [INITIALIZE] (x   page   143) is executed. fChange the password periodically that is hard to guess.   

Chapter 4 Settings — [NETWORK] menu
154 - ENGLISH
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
[DIGITAL LINK MODE]
Switch the communication method of the  terminal of the projector.
1)
 
Press 
 as to select [DIGITAL LINK MODE].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO] Switches the...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 155
6) Press the  button.
7)  
After the confirmation screen is displayed, press 
 qw to select [OK], and then press the  
button.
Note
 f The projector does not support 10BaseT  Full/Half.
When the projector is connected to a twisted-pair-cable transmitter
1) Press as to select [DIGITAL LINK SETUP].
2)  
Press the  button.
 fThe 

[DIGITAL LINK SETUP] screen is displayed.
3)
 
Press 
 as to select [DUPLEX(DIGITAL LINK)].
4)
 
Press 
 qw to switch the...

Chapter 4 Settings — [NETWORK] menu
156 - ENGLISH
[DHCP][ON]
If a DHCP server exists in the network where the projector is to be 
connected, obtains the IP address automatically.
[OFF] If a DHCP server does not exist in the network where the projector 
is to be connected, set [IP ADDRESS], [SUBNET MASK], and 
[DEFAULT GATEWAY].
[IP ADDRESS] Enter the IP address when a DHCP server is not used.
[SUBNET MASK] Enter the subnet mask when a DHCP server is not used.
[DEFAULT GATEWAY] Enter the default gateway...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 157
[DIGITAL LINK MENU]
When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET- YFB200G) is connected 
to the  terminal, the main menu of DIGITAL LINK output supported device is displayed. 
Refer to the Operating Instructions of the DIGITAL LINK output supported device for details.
Note
 f [DIGITAL LINK MENU] cannot be selected when [EXTRON XTP] is set to [ON]. fThe operation guidance for the “RETURN” button is in the menu screen of...

Chapter 4 Settings — [NETWORK] menu
158 - ENGLISH
[LIGHT OUTPUT]Adjusts the amount of light.
[INPUT SELECT] Switches the input.
[LENS POSITION] Moves the lens position.
[LENS H SHIFT] Adjusts the lens shift in the horizontal direction.
[LENS V SHIFT] Adjusts the lens shift in the vertical direction.
[LENS FOCUS] Adjusts the focus.
[LENS ZOOM] Adjusts the zoom.
[POWER] Controls the power status.
[SHUTTER] Controls the shutter.
[GEOMETRY] Performs geometric adjustment.
[CUSTOM MASKING]
*1Performs geometric...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 159
 rExample of a normal network connection
Computer
Projector
LAN cable (straight) LAN cable (straight) Hub
 fA web browser is required to use this function. Confirm that the web browser can be used beforehand.
Supported browser: Internet Explorer 8.0/9.0/10.0/11.0 (Windows OS), Safari 6.0/7.0/8.0 (Mac OS)
 f Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.
 fUse a LAN cable that is...

Chapter 4 Settings — [NETWORK] menu
160 - ENGLISH
 fFor the LAN cable between the twisted-pair-cable transmitter and the projector , use a cable that meets the following criteria:
 gConforming to CA

T5e or higher standards
 gShielded type (including connectors)
 gStraight-through
 gSingle wire
 fThe maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100

  m (328'1"). It is possible to 
transmit up to 150
  m (492'2") if the twisted-pair-cable...