Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 171
[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
2
3
4
5
6
7
8
1 [Auth]
Select the authentication method specified by your Internet 
service provider
.
2
 
[SMTP
  Auth]
Set when the SMTP authentication is selected.
3
 
[POP
  server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0...

Chapter 4 Settings — [NETWORK] menu
172 - ENGLISH
Contents of E-mail sent
Example of the E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been establis\
hed.
=== P anas onic  pr ojec t or  r epor t ( CO NF I G URE )  ===
P r ojec t or  T y pe  :  DZ 21K 2
S er ial No  :  123456789012
-----  E-mail set up dat a -----
T EMPERAT URE WARNING  SET UP 
M I NI M UM  T I M E   at  [  60]  m inut es  int er v al 
I NT A K E  A I R T E M P E RA T URE   O v er  [  46degC /...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 173
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== P anas onic  pr ojec t or  r epor t ( E RRO R)  ===
P r ojec t or  T y pe  :  DZ 21K 2
S er ial No  :  123456789012
-----  check syst em -----
M A I N CP U B US   [F AILED]
      PO WER  [F AILED]
F A N  [   O K   ]
EXHAUST 1-F AN  [   O K   ]
EXHAUST 2-F AN  [   O K   ]
EXHAUST 3-F AN  [   O K   ]
EXHAUST 4-F AN  [   O K   ]
INT AKE1-F AN  [   O K   ]
INT...

Chapter 4 Settings — [NETWORK] menu
174 - ENGLISH
[Change password] page
Click [Change password].
1
2
3
1 [Administrator]
Used to change the setting of the [Administrator].
2
 
[User]
Used to change the setting of the [User]. 3

 [Next]
Used to change the setting of the password.
[Administrator] account
1
3
2
4
1 [Account]
Displays the account to change.
2
 
[Current]
[User name]: 
Enter the user name before the change.
[Password]: 
Enter the current password. 3

 [New]
[User name]: 
Enter the desired...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 175
[User] account
1
2
3
1 [Account]
Displays the account to change.
2
 
[New]
[User name]: 
Enter the desired new user name. (Up to 16 characters in single 
byte)
[Password]: 
Enter the desired new password. (Up to 16 characters in single 
byte)
[Password(Retype)]: 
Enter the desired new password again. 3

 [OK]
Determines the change of password.
[Change password] (For user rights)
Only the change of password is enabled under the user rights.
1
2
4 3
1 [Old...

Chapter 4 Settings — [NETWORK] menu
176 - ENGLISH
Operation page
1
2
3
4
5
6
7
1 [Tools], [Info], [Help]Tabs for selecting the setting, information, or help page of the 
projector.
2
 
[POWER]
T

urns on/off the power.
3
 
[SHUTTER]
Switches whether to use the shutter function (enabled (shutter: 
closed)/disabled (shutter: open)). 4

 [Input Select]
Controls input selection.
Not available when the power of the projector is turned of
f.
5
 
Menu screen control buttons
Navigates the menu screen.
6...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 177
[Info] page
Click [Info] in the operation page.
3
4
5
1
2
6
1 [Projector Name]
Displays the projector name.
2
 
[Mac Address]
Displays the MAC address.
3

 
[Power Status]
Displays the status of the power

. 4
 [Source]
Displays the selected input.
5
 
[Error Status]
Displays the error status.
6

 
[Exit]
Returns to the operation page.
[Help] page
Click [Help] in the operation page.
The [Help Desk] window is displayed.
1
1 [Help Desk]
A  message can be...

178 - ENGLISH
Chapter 5 Maintenance
This chapter describes methods of inspection when there are problems, ma\
intenance, and replacement of the 
units.  

Chapter 5 Maintenance — Lamp/temperature/filter indicators
ENGLISH - 179
Lamp/temperature/filter indicators
When an indicator lights up
If a problem should occur inside the projector, the lamp indicators ///, the 
temperature indicator , and the filter indicator  will inform you by lighting or blinking. Check the 
status of the indicators and manage the indicated problems as follows.Attention
 f When switching of f the projector to deal with problems, make sure to follow the procedure in “Switching of f...

Chapter 5 Maintenance — Lamp/temperature/filter indicators
180 - ENGLISH
Temperature indicator 
Indicator statusLighting in red Blinking in red
(2 times) Blinking in red
(3 times)
Status Warm-up status Internal temperature is high 
(warning).Internal temperature is high 
(standby status).The cooling fan has 
stopped.
Cause
 f Did you turn on the power 
when the temperature 
was low (around 0

  °C 
(32
  °F))?
 fIs the air intake/exhaust port blocked?
 fIs the room temperature high?
 fIs the filter...