Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 161
4) Click OK.
 fThe [Projector status] page is displayed.
Note
 f If you use a web browser to control the projector , set [WEB CONTROL] to [ON] in [NETWORK CONTROL] ( x   page   156). fDo not perform setting or control simultaneously by starting up multiple\
 web browsers. Do not set or control the projector from multiple 
computers.
 fChange the password first. ( x

  page   174)
 fThe administrator rights allow use of all functions. 

The user rights...

Chapter 4 Settings — [NETWORK] menu
162 - ENGLISH
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
13
14
156
9
7
8
1
2
3
4
16
5
10
11
12
1 [PROJECTOR TYPE]
Displays the type of the projector.
2
 
[MAIN VERSION]
Displays the firmware version of the projector

.
3
 
[POWER]
Displays the status of the power

.
4
 
[SHUTTER]
Displays the status of shutter function (ON: enabled (closed), 
OFF: disabled (open)).
5

 
[LAMP
  SELECT]...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 163
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display field of the [Projector status] 
screen, click it to display the content of the error/warning.
 fThe projector may go into the standby status to protect the projector de\
pending on the contents of the error

.
1
1 Self-diagnosis result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[F
AILED]:
Indicates that there...

Chapter 4 Settings — [NETWORK] menu
164 - ENGLISH
ItemDescription
[BRIGHTNESS SENSOR] There is a problem with the luminance sensor. If problems persist even after switching 
on the power, consult your dealer.
[ANGLE SENSOR] There is a problem with the angle sensor. Consult your dealer.
[LAMP DRIVE MODE] There is a problem with the lamp. Consult your dealer.
[FILTER UNIT] The air filter unit is not attached. Check the connection of the air filter unit. 
(x
  page   181)
 r[WARNING] items
Item Description...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 165
[Access error log] page
Click [Status] → [Access error log].
The error log on the web server is displayed such as access to the pages that do not exist or access with 
unauthorized user names or passwords.
[Mail error log] page
Click [Status] → [Mail error log].
E-mail error log is displayed if periodic E-mail sending has failed.
Note
 f[Access error log] and [Mail error log] display the recent few thousand accesses/requests.  All information may not be...

Chapter 4 Settings — [NETWORK] menu
166 - ENGLISH
[Basic control] page
Click [Projector control] → [Basic control].
1
2
3
4
6
5
1 [POWER]
T
urns on/off the power.
2
 
[SHUTTER]
Switches whether to use the shutter function (enabled (shutter: 
closed)/disabled (shutter: open)).
3

 
[OSD]
Switches on (display)/of

f (hide) the on-screen display function.
4
 
[SYSTEM]
Switches the system method. 5

 On-screen display of the projector
Displays the same items as shown on the on-screen display 
of the...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 167
[Network config] page
Click [Detailed set up] → [Network config].
 fClick [Network config] to display the  [CAUTION!]

 screen.
 fThe current settings are displayed by pressing the [Next] button.
 fClick [Change] to display the setting change screen.
1
2
3
4
5
6
7
8
1 [PROJECT OR NAME]
Enter the name of the projector. Enter the host name if it is 
required when using a DHCP server etc.
2
 
[DHCP
  ON], [DHCP OFF]
To enable the DHCP client function, set to...

Chapter 4 Settings — [NETWORK] menu
168 - ENGLISH
[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1
2
3
4
5
6
7
1 [Time Zone]
Select the time zone.
2
 
[Set time zone]
Updates the time zone setting.
3

 
[NTP
  SYNCHRONIZATION]
Set to [ON] to adjust the date and time automatically.
4
 
[NTP
  SERVER NAME]
Enter the IP address or server name of the NTP server when 
you set to adjust the date and time manually.
(To enter the server name, the DNS server needs to be set up.) 5
 [Date]
Enter the...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 169
[E-mail set up] page
When there is a problem or the runtime of a lamp reaches a set value, an\
 E-mail can be sent to preset E-mail 
addresses (up to two addresses).
Click [Detailed set up] → [E-mail set up].
1
2
3
4
5
6
1 [ENABLE]
Select [Enable] to use the E-mail function.
2
 
[SMTP
  SERVER NAME]
Enter the IP address or the server name of the E-mail server 
(SMTP). To enter the server name, the DNS server needs to be 
set up.
3
 
[MAIL
  FROM]
Enter...

Chapter 4 Settings — [NETWORK] menu
170 - ENGLISH
8
7
9
8
7
7 [E-MAIL ADDRESS 1], [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS 
2] blank when two E-mail addresses are not to be used. 8
 Settings of the conditions to send E-mail
Select the conditions to send E-mail.
[MAIL
 CONTENTS]: 
Select either [NORMAL] or [SIMPLE].
[ERROR]: 
Send an E-mail when an error occurred in the self-diagnosis.
[LAMP1 RUNTIME]:
Send an E-mail when the remaining lamp runtime for the lamp 1 
has...