Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 101
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Decreases the flickering of the displayed image.
[ON] Synchronizes the displayed image to the vertical scanning frequency of the input signal.
Note
 f[FRAME LOCK] is not displayed when a signal with the vertical scanning frequency other than the above is input or 2D images are 
displayed.
 fThe image may flicker when [FRAME LOCK] is set to [ON]. fThe...

Chapter 4 Settings — [DISPLAY LANGUAGE] menu
102 - ENGLISH
[DISPLAY LANGUAGE] menu
On the menu screen, select [DISPLAY LANGUAGE] from the main menu, and display the sub-menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
Changing the display language
You can select the language of the on-screen display.
1)
 
Press 
 as to select the display language and press the  button.
ENTER
DISPLAY LANGUAGE
SELECT
SET
 fVarious menus, settings, adjustment screens,...

Chapter 4 Settings — [3D SETTINGS] menu
ENGLISH - 103
[3D SETTINGS] menu
(Only for PT-DZ21K2, PT- DS20K2)
On the menu screen, select [3D SETTINGS] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” ( x
  page   77) for the operation of the menu screen.
[3D SYSTEM SETTING]
Set the image display method to be used during 3D signal input, accordin\
g to the 3D system in use.
1) 
Press 
 as to select [3D SYSTEM SETTING].
2)
 
Press 
 qw to switch the item.
 fThe...

Chapter 4 Settings — [3D SETTINGS] menu
104 - ENGLISH
Select [9] or [10] for the first projector.
Select [6], [7], or [8] for the second and subsequent projectors.
 fStereo synchronization is a signal having a 

  50   % duty cycle where High is for the left eye and Low is for 
the right eye.
 f “H” is output to the 3D image display and “L” is output to the 2D image display from the terminal for which 
3D trigger output is selected.
Note
 f [11] in [3D SYNC MODE] is the setting when the 3D IR transmitter...

Chapter 4 Settings — [3D SETTINGS] menu
ENGLISH - 105
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[SHARED 2D/3D] Uses same correction data for 2D signal and 3D signal.
[SEPARATE 2D/3D] Uses different correction data for 2D signal and 3D signal.
Note
 fSwitch the setting of [COLOR MA TCHING] (x   page   108) while the signal to be adjusted is being input.
[3D PICTURE BALANCE]
Correct the difference when the images for left eye and right eye have different...

Chapter 4 Settings — [3D SETTINGS] menu
106 - ENGLISH
[0.5ms]Sets an item so that 3D setting is made correctly.
[1.0ms]
[1.5ms]
[2.0ms]
[2.5ms]
[2.7ms]
Note
 f
This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE]. fThe crosstalk may get larger or the displayed image may get darker when \
the setting does not match with the 3D system in use.
[3D FRAME DELAY]
Adjust the timing of the left-right switch of an image.
1)
 
Press 
 as to select [3D FRAME DELAY].
2)
 
Press...

Chapter 4 Settings — [3D SETTINGS] menu
ENGLISH - 107
[SAFETY PRECAUTIONS MESSAGE]
Set to show or hide the safety precautions message related to 3D viewing\
 when the projector is switched on.
1) 
Press 
 as to select [SAFETY PRECAUTIONS MESSAGE].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[ON] Shows the safety precautions message related to 3D viewing when the proj\
ector is switched on.
[OFF] Hides the safety precautions message related to 3D viewing...

Chapter 4 Settings — [DISPLAY OPTION] menu
108 - ENGLISH
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
[COLOR MATCHING]
Correct the color difference between projectors when using multiple projectors simultaneously\
.
Adjusting the color matching as desired
1) Press as to select [COLOR MATCHING].
2)  
Press 
 qw to switch the item....

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 109
4) Press as to select [MEASURED DATA].
5)  
Press the  button.
 fThe 

[MEASURED DATA] screen is displayed.
6)
 
Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter .
7)

 
Press 
 as to select a color, and press qw to adjust the setting.
 fSet [AUT

O TESTPATTERN] to [ON] to display a test pattern of selected colors.
8)
 
Once all the input is completed, press the  button.
 fThe 

[709MODE] or [MEASURED...

Chapter 4 Settings — [DISPLAY OPTION] menu
110 - ENGLISH
Model No.[SCREEN FORMAT] Range when [SCREEN POSITION] is selected
PT
-
 DS20K2 [4:3]
Cannot be adjusted.
[16:9] Adjusts the vertical position between 
-132 and 131.
PT
-

DZ16K2 [16:9]
Cannot be adjusted.
[4:3] Adjusts the horizontal position between 
-240 and 240.
4) Press as to select [SCREEN POSITION].
 f[SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMA T] is set to the following 
item.
PT
-

DZ21K2: [16:10]
PT
-

DS20K2:...