Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 61
Initial setting (installation setting)
Set [PROJECTION METHOD] depending on the installation mode. Refer to “Installation mode” (x   page   33) for 
details.
After completed the initial setting, you can change the setting from the [PROJECT OR SETUP] menu → 
[PROJECTION METHOD].
1)
 
Press 
 qw to switch the setting.
2/6
ENTERSET CHANGE
Change the projection method if the screen display is 
upside down or inverted.PROJECTION...

Chapter 3 Basic Operations — Switching on/off the projector
62 - ENGLISH
Initial setting (screen setting)
(Only for PT-DZ21K2, PT- DS20K2, PT- DZ16K2)
Set the screen format (aspect ratio) and display position of the image.  After completed the initial setting, you can 
change the settings of each item from the [DISPLAY OPTION] menu → [SCREEN SETTING].
1)
 
Press 
 as to select an item.
2)
 
Press 
 qw to switch the setting.
16:104/6
SCREEN POSITION
Set as necessary for the screen in use.
INITIAL SETTING...

Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 63
Initial setting (date and time)
Set the local date and time. After completed the initial setting, you can change the setting from the [PROJECTOR 
SETUP] menu → [DATE AND TIME].
To set the date and time automatically, refer to “Setting the date and time automatically” (x
  page   140).
1)
 
Press 
 as to select an item.
20XX6/6
11123456
MONTH
D AY
HOUR
MINUTE
SECOND
Please set the date and time of the built-in clock of the...

Chapter 3 Basic Operations — Switching on/off the projector
64 - ENGLISH
9) Press the  button again to adjust the zoom and the image size to m\
atch the screen.
Note
 f When the projector is switched on for the first time after purchase, as well as when [ALL  USER DA TA] is executed from the [PROJECTOR 
SETUP] menu → [INITIALIZE], the focus adjustment screen is displayed after projection starts, then the [INITIAL SETTING] screen is 
displayed. Refer to “When the initial setting screen is displayed” ( x...

Chapter 3 Basic Operations — Projecting
ENGLISH - 65
Projecting
Check the projection lens attachment (x   page   50), external device connection (x   page   52), power cord 
connection ( x
  page   58), switch on the power ( x
  page   59) to start projecting. Select the video for projection, 
and adjust appearance of the projected image.
Selecting the input signal
Select an input signal.
1)
 
Press the input selection button (, , , , , , or 
) on the remote control or the control panel.
(SDI input is...

Chapter 3 Basic Operations — Projecting
66 - ENGLISH
 fWhen the main power is switched of f during focus adjustment, lens calibration is performed automatically during the next focus adjustment. fWhen the main power is switched of
f during shift adjustment, a lens calibration error screen will be displayed during the next shift 
adjustment. Execute the [PROJECTOR SETUP] menu → [LENS CALIBRATION].
 f When the lens calibration error is displayed even though [LENS CALIBRA TION] was executed, ask your dealer...

Chapter 3 Basic Operations — Projecting
ENGLISH - 67
Setting the lens position
To move the lens position to the home position or the lens standard posit\
ion, perform the following procedure.
1) 
Press the  button on the remote control while the shift adjustment screen is dis\
played.
 fThe 

[HOME POSITION]  screen is displayed.
LENS
HOME POSITION
EXECUTE CANCEL
ENTERMENU
NORMAL
CHANGE
2) Press 
qw to switch the item.
 fThe items will switch each time you press the button.
[NORMAL] Moves the lens to the...

Chapter 3 Basic Operations — Projecting
68 - ENGLISH
 rFor PT- DS20K2
Projection lens Model No.
ET
-

D75LE8, ET
-

D75LE10, ET
-
 D75LE20, 
ET
-

D75LE30, ET
-

D75LE40 ET
-

D75LE6
Projected image width H
Standard projection position
Projected image height V
0.3 H 0.3 H
0.1 V
0.1 V
0.5 V 0.5 V
Projected image width H
Standard projection position
Projected image height V
0.2 H 0.2 H
0.4 V0.4 V0.12 V
0.12 V
 r For PT- DW17K2
Projection lens Model No.
ET
-

D75LE8, ET
-

D75LE10, ET
-

D75LE20, 
ET
-...

Chapter 3 Basic Operations — Projecting
ENGLISH - 69
 fWhen the optional fixed-focus lens (Model No.: ET- D75LE90) is attached to the PT- DS20K2, use it in the reference projection position 
without adjusting shift.
Adjusting the lens mounter when the focus is unbalanced
Focus balance
Relationship between the tilt of the lens and the screen focus surface
When the projection lens is tilted in contrast with the image forming surface, tilting the front side (screen side) 
of the projection lens downwards...

Chapter 3 Basic Operations — Projecting
70 - ENGLISH
Adjustment procedure
 rRelationship between the adjustment location and adjustment screws
(b) (c)
(b)+(c)
(a)
Adjustment location:
Location where the just focus point of the screen is in the 
inner side of the screen
When the just focus point of 
the screen in V up (top in the 
vertical direction) is in the inner 
side of the screen When the just focus point of the 
screen in V bottom (bottom in 
the vertical direction) is in the 
inner side of the...