Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

ENGLISH - 11
Read this first!
WARNING:
 rACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.
 fDo not use unspecified batteries.
 fDo not charge dry cell batteries.
 fDo not disassemble dry cell batteries.
 fDo not heat the batteries or place them into water or fire.
 fDo not allow the + and – terminals of the batteries to come into contact with metallic objects such as...

12 - ENGLISH
Read this first!
CAUTION:
 rPOWER
When disconnecting the power cord, be sure to hold the power plug and power connector
.
If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks 
will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall 
outlet.
Failure to do so may result in fire or electric shock.
Before replacing the projection lens, be sure to turn off the power and...

ENGLISH - 13
Read this first!
CAUTION:
When not using the projector for an extended period of time, remove the batteries from the remote 
control.
Failure to observe this will cause the batteries to leak, overheat, catch fire or explode, which may result in fire
or contamination of surrounding area.
 rMAINTENANCE
Do not attach the air filter unit while it is wet.
Doing so may result in electric shock or malfunctions.
 fAfter you clean the air filter units, dry them thoroughly before reattaching them.
Do...

14 - ENGLISH
Read this first!
To remove the battery
Remote Control Battery
1.
 P
 ress the guide and lift the cover.
(i)
(ii)
2. Remove the batteries.
Brazil Only
Brasil Apenas
 r
Manuseio de baterias usadas
BRASIL
Após o uso, as pilhas e/ou baterias deverão 
ser entregues ao estabelecimento comercial 
ou rede de assistência técnica autorizada.
Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa caixa 
destinada para o recolhimento. O contato entre...

 
ENGLISH - 15
 rTrademarks
 fWindows and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the United 
States and other countries.
 fMac, Mac OS, and Safari are trademarks of 

Apple Inc., registered in the United States and other countries.
 fPJLinkTM is a registered trademark or pending trademark in Japan, the United Sta\
tes, and other countries and 
regions.
 f HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of...

 
16 - ENGLISH
Features of the Projector
High resolution and clear picture 
quality
 /£Sharpness is enhanced by improvement 
of the unique picture quality correction 
technology and the optical system. 
The 
drawing performance of the moving image 
has also drastically improved by adopting 
the double speed driving of the DLP 
chip
*1 and the unique image processing 
technology
*1.
*1 Only for PT- DZ21K2, PT- DS20K2, and PT- DZ16K2
Easy setup and improved 
serviceability
 /£Inherited the highly flexible...

ENGLISH - 17
Chapter 1 Preparation
This chapter describes things you need to know or check before using the\
 projector. 

Chapter 1 Preparation — Precautions for use
18 - ENGLISH
Precautions for use
Cautions when transporting
 fBefore using the projector , remove the dust sponge from the mounting portion of the projection len\
s and store it 
for the future use. When transporting the projector, remove the projection lens before attaching the dust sponge. 
Otherwise dust will accumulate inside and may cause malfunctions.
 f T

ransport the projector with 2 or more people. Failure to do so may drop the projector , which may...

Chapter 1 Preparation — Precautions for use
ENGLISH - 19
 rThe projector may not work properly due to strong radio wave from the br\
oadcast 
station or the radio.
If there is any facility or equipment which outputs strong radio waves near the installation location, install the 
projector at a location sufficiently far from the source of the radio waves. Or , wrap the LAN cable connected to the 
 terminal using a piece of metal foil or a metal pipe which is grounded at both ends.
 r Focus adjustment
The...

Chapter 1 Preparation — Precautions for use
20 - ENGLISH
Make a clearance of at least 5 mm (3/16") between the projector bottom and the setting surface by inserting 
spacers (metallic) between them.
Screw holes for ceiling mount 
(M6)
Adjustable feet
Clearance (5 mm (3/16) or longer)
Ensure the inflow of air into the air intake port. Otherwise the 
projector may not work properly. Spacer
Mount
Positions of screw holes for ceiling mount and  adjustable feetAdjustable feet
 f
Do not stack projectors on...