Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 1 Preparation — Precautions for use
ENGLISH - 21
 fDo not install the projector in a confined space.
When installing the projector in a confined space, provide air conditioning or ventilation separately . Exhaust heat 
may accumulate when the ventilation is not enough, triggering the protec\
tion circuit of the projector
.
Security
When using this product, take safety measures against the following inci\
dents.
 fPersonal information being leaked via this product
 fUnauthorized operation of this...

Chapter 1 Preparation — Precautions for use
22 - ENGLISH
Cautions on use
 rTo get a good picture quality
In order to view a beautiful image in higher contrast, prepare an approp\
riate environment. Draw curtains or blinds 
over windows and turn off any lights near the screen to prevent outside light or light from indo\
or lamps from 
shining onto the screen.
 rDo not touch the surface of the projection lens with your bare hands.
If the surface of the projection lens becomes dirty from fingerprints or...

Chapter 1 Preparation — Precautions for use
ENGLISH - 23
Accessories
Make sure that the following accessories are provided with your projector. Numbers enclosed in <    > show the 
number of accessories.
Wireless/wired remote control unit 
(N2QAYB001052)
Power cord 
(K2CM3YY00007)
(K2CT3YY00014)
(K2CG3YY00035)
(K2CZ3YY00058)
(K2CZ3YY00032)
CD-ROM 
(TXFQB02WNLZ)
AA/R6 battery 
(For remote control unit)
Lens fixing screw 
(XYN4+J18FJ)
Attention
 f After unpacking the projector , discard the power cord cap...

Chapter 1 Preparation — Precautions for use
24 - ENGLISH
Contents of the supplied CD-ROM
The contents of the supplied CD-ROM are as follows.
Instruction/list (PDF) Operating Instructions – Functional ManualMulti Monitoring & Control Software Operating Instructions
Logo Transfer Software Operating Instructions
List of Compatible Device 
ModelsThis is a list of display models (projector or flat panel display) that 
are compatible with the software contained in the CD-ROM and 
their restrictions.
Software...

Chapter 1 Preparation — About your projector
ENGLISH - 25
About your projector
Remote control
1
2
6 4
7 5
8
9
10 3
13 12 11
20
14
15
16
23
17
18
19 21
22
Front To p
Bottom
A strap can be attached 
depending on the usage.
1 Remote control indicator
Blinks if any button in the remote control is pressed.
2
 
Power on < b

> button
Sets the projector to projection mode when the  switch on the projector is set to  and the power 
is turned off (standby mode).
3
 
Power standby <
 v> button
Sets the projector...

Chapter 1 Preparation — About your projector
26 - ENGLISH
Attention
 fDo not drop the remote control. fA
void contact with liquids or moisture.
 fDo not attempt to modify or disassemble the remote control. fDo not swing the remote control holding onto the strap when a strap is a\
ttached. fObserve the following instructions that are indicated on the caution label at the back of the remote control: gDo not use old battery with new one. gDo not use batteries other than the type specified. gBe sure the...

Chapter 1 Preparation — About your projector
ENGLISH - 27
Projector body
1 2 3 4 5 67
8 8
12 13
109
14
16
10 10
14
11
21 22
19
1817 17 17 1020
Front Side
Rear
10 15
Projection direction
BottomWARNING
Keep your hands and other objects away from the air 
exhaust port.
 f
Keep your hands and face away

.
 fDo not insert your fingers.
 fKeep heat-sensitive objects away

.
Heated air from the air exhaust port can cause burns, injury, or 
deformations.
1
 
Power indicator 
Indicates the status of the power.
2...

Chapter 1 Preparation — About your projector
28 - ENGLISH
17 Lighting for the control panel and connecting terminals
18  
Control panel ( x

  page   28)
19
 
Connecting terminals ( x

  page   29)20
 Security slot
This security slot is compatible with the Kensington security 
cables.
21
 
 terminal
Connect the supplied power cord.
22

 
 switch
T

urns on/off the main power.
Attention
 fDo not block the ventilation ports (intake and exhaust) of the projector .
 rControl panel
11
12
13
14
15
17 16
1
2
3...

Chapter 1 Preparation — About your projector
ENGLISH - 29
 rConnecting terminals
1 2 3 4 5
89 10 11 12
 6
7
1  terminal/ terminal
These are terminals to connect the remote control for serial 
control in a multiple projector environment.
2
 
 terminal
This is a terminal to remotely control the projector using the 
external control circuit.
3

 
 terminal
This is the RS
- 232C compatible terminal to externally control 
the projector by connecting a computer.
4
 
 terminal
This is a terminal to output the...

Chapter 1 Preparation — Preparing the remote control
30 - ENGLISH
Preparing the remote control
Inserting and removing the batteries
(i)
(ii)
Fig. 1
Fig. 2
1) Open the cover. (Fig. 1)
2)  
Insert the batteries and close the cover (insert the 
 m side first). (Fig. 2)
 fWhen removing the batteries, perform the steps in reverse order

.
When using the multiple projectors
When you use the multiple projectors together, you can operate all the projectors simultaneously or each projector 
individually using...