Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 4 Settings — [POSITION] menu
ENGLISH - 91
[POSITION] menu
On the menu screen, select [POSITION] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
Note
 f When the optional DIGIT AL LINK output supported device (Model No.: ET- YFB100G, ET- YFB200G) is connected to the  terminal, adjust the shift, aspect, and clock phase from the menu of DIGIT AL LINK output supported device at first.
[SHIFT]
Move...

Chapter 4 Settings — [POSITION] menu
92 - ENGLISH
[VID AUTO]*1The projector identifies the video ID (VID) embedded in the video signals and displays the image by 
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC 
signals.
[AUTO]
*2The projector identifies the video ID (VID) embedded in the video signals and displays the image by 
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for 480i/480p 
signals.
[THROUGH]...

Chapter 4 Settings — [POSITION] menu
ENGLISH - 93
When [ASPECT] is set to [DEFAULT]
1) Press as to select [ZOOM].
2)  
Press the  button.
 fThe 

[ZOOM] screen is displayed.
3)
 
Press 
 as to select [MODE].
4)
 
Press 
 qw to switch the item.
[INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMA T].
[FULL] Enlarges or reduces the size using the entire display area set with [SCREEN FORMA T].
5) Press as to select [INTERLOCKED].
6)  
Press 
 qw to switch the item.
[OFF] Sets the...

Chapter 4 Settings — [POSITION] menu
94 - ENGLISH
[PC-1]*1
Performs geometric adjustment using a computer.
[PC-2]*1
[PC-3]*1
*1 Only for PT- DZ21K2, PT- DS20K2
Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer . Up to three geometric adjustments 
performed using the computer can be saved.
Setting [KEYSTONE] or [CURVED]
1) Press  as to select [GEOMETRY].
2)  
Press 
 qw to select [KEYSTONE] or [CURVED].
3)
 
Press the  button.
 fThe 

[GEOMETRY:KEYSTONE]...

Chapter 4 Settings — [POSITION] menu
ENGLISH - 95
[CURVED]
[VERTICAL BALANCE]
[HORIZONTAL BALANCE]
[MAINTAIN ASPECT RATIO]
Select [ON] to correct while keeping the aspect ratio.
Setting [CORNER CORRECTION]
1) Press  as to select [GEOMETRY].
2)  
Press 
 qw to select [CORNER CORRECTION].
3)
 
Press the  button.
 fThe 

[GEOMETRY:CORNER CORRECTION] screen is displayed.
4)
 
Press 
 as to select the item to adjust, and press the  button.
5)
 
Press 
 asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT]
[UPPER...

Chapter 4 Settings — [ADVANCED MENU] menu
96 - ENGLISH
[ADVANCED MENU] menu
On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance the image quality by performing cinema processing when 
the PAL (or SECAM) 576i signal, the NTSC 480i signal, and 1080/50i, 1080/60i are input.
1)
 
Press 
 as...

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 97
Blanking correction Item OperationAdjustmentRange of adjustment
Left side of the  screen [LEFT]Press w.
The blanking zone 
moves to the right.
PT-
DZ21K2: Left to right 
0 - 959
PT
-

DS20K2: Left to right  0 - 699
PT
-

DW17K2: Left to right  0 - 682
PT
-

DZ16K2: Left to right  0 - 959
Press q.
The blanking zone 
moves to the left.
Right side of the  screen [RIGHT]Press q.
The blanking zone 
moves to the right.
Press w.The blanking zone 
moves to...

Chapter 4 Settings — [ADVANCED MENU] menu
98 - ENGLISH
[EDGE BLENDING]
The edge blending function allows multiple projector images to be seamle\
ssly overlapped by using the inclination 
of the brightness at the overlapped area.
1) 
Press 
 as to select [EDGE BLENDING].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Sets the edge blending function to off.
[ON] Use the setting value preset in the projector for the inclination of the\
 edge blending area....

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 99
14) Press as to select an item, and press qw to adjust the setting.
 fOnce the adjustment is completed, press the  button to return to the  [BRIGHTNESS ADJUST]

 
screen.
15)
 
Press 
 as to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [BLACK BORDER WIDTH].
16)
 
Press 
 qw to set the region (width) of the [BLACK BORDER WIDTH] adjustment.
 fWhen PT-

DZ21K2, PT
-
 DS20K2, or PT
-
 DZ16K2 is used, proceed to Step 17).
 fWhen PT-

DW17K2 is used,...

Chapter 4 Settings — [ADVANCED MENU] menu
100 - ENGLISH
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[NORMAL] Standard setting.
[FAST]
*1Simplifies the image processing to reduce image frame delay.
[FIXED] Sets image frame delay to be constant regardless of the image position or magnification.
[COMPATIBLE]
*2Sets to DZ21K series compatible frame delay.
DZ21K series: DZ21K series, DS20K series, DZ16K series
*1 When input signals are other than interlaced signals,...