Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

							Chapter 4 Settings — [POSITION] menu
ENGLISH - 91
[POSITION] menu
On the menu screen, select [POSITION] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
Note
 f When the optional DIGIT AL LINK output supported device (Model No.: ET- YFB100G, ET- YFB200G) is connected to the  terminal, adjust the shift, aspect, and clock phase from the menu of DIGIT AL LINK output supported device at first.
[SHIFT]
Move the image position vertically or horizontally if the image projected on the screen is still out of position even 
when the positions of the projector and screen are correct.
1)
 
Press 
 as to select [SHIFT].
2)
 
Press the  button.
 fThe 

[SHIFT] screen is displayed.
3)
 
Press 
 asqw to adjust the position.
Orientation Operation Adjustment
Vertical (up and down)  adjustment Press a.
The image position moves up.
Press s. The image position moves down.
Horizontal (right and left) 
adjustment Press w.
The image position moves to the right.
Press q.The image position moves to the left.
Note
 f
For the portrait setting, image position is moved horizontally when “V ertical (up and down) adjustment” is made. Image position is moved 
vertically when “Horizontal (right and left) adjustment” is made.
(Only for PT
-

DZ21K2, PT
-
 DS20K2, PT
-
 DW17K2)
[ASPECT]
You can switch the aspect ratio of the image.
The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING] 
first. (x
  page   109)
1)
 
Press 
 as to select [ASPECT].
2)
 
Press 
 qw or the  button.
 fThe 

[ASPECT] individual adjustment screen is displayed.
3)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[DEFAULT] Displays images without changing the aspect ratio of the input signals.   
						

							Chapter 4 Settings — [POSITION] menu
92 - ENGLISH
[VID AUTO]*1The projector identifies the video ID (VID) embedded in the video signals and displays the image by 
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC 
signals.
[AUTO]
*2The projector identifies the video ID (VID) embedded in the video signals and displays the image by 
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for 480i/480p 
signals.
[THROUGH] Displays images without changing the resolution of the input signals.
[16:9] Displays images with the aspect ratio converted to 16:9 when standard signals are input
*3. When 
wide-screen signals are input*4, the images are displayed without changing the aspect ratio.
[4:3] Displays images without changing the aspect ratio when standard signals \
are input
*3. When wide-
screen signals are input*4, and [4:3] is selected in [SCREEN FORMAT], the images are displayed by 
converting the aspect ratio to 4:3. When anything other than [4:3] is selected in [SCREEN FORMA T], 
the images are reduced to be displayed without changing input aspect ratio so that the images will fit 
in the 4:3 screen.
[H FIT] Displays images using the entire width of the screen range selected in [SCREEN FORMA
T]. When 
signals have the aspect ratio vertically longer than the screen aspect ratio selected in [SCREEN 
FORMAT], the images are displayed with the top and bottom parts cut off.
[V FIT] Displays images using the entire height of the screen range selected in [SCREEN FORMA
T]. When 
signals have the aspect ratio horizontally longer than the aspect ratio of the screen selected in 
[SCREEN FORMAT], the images are displayed with the right and left parts cut off.
[HV FIT] Displays images in the entire screen range selected in [SCREEN FORMA
T]. When the aspect ratio of 
the input signals differs from that of the screen range, the images are displayed with the as\
pect ratio 
converted to that of the screen selected in [SCREEN FORMAT].
*1 During video signals and  Y/C signal (NTSC) input only
*2  
During RGB signal (480i, 480p) input
*3

 
Standard signals are input signals with an aspect ratio of 4:3 or 5:4.
*4

 
Wide-screen signals are input signals with an aspect ratio of 16:10, 16:9, 15:9 or 15:10.
Note
 f Some size modes are not available for certain types of input signals. [DEF AUL T] cannot be selected for video signal, Y/C signal (NTSC), or 
RGB (480i, 480p) signal.
 f If an aspect ratio which is dif

ferent from the aspect ratio for the input signals is selected, the imag\
es will appear differently from the originals. 
Be careful of this when selecting the aspect ratio.
 f If using the projector in places such as cafes or hotels to display prog\
rams for a commercial purpose or for public presentation, note that 
adjusting the aspect ratio or using the zoom function to change the screen images may be an infringement of the rights of the original 
copyright owner for that program under copyright protection laws. 

Take care when using a function of the projector such as the aspect ratio\
 
adjustment and zoom function.
 f If conventional (normal) 4:3 images which are not wide-screen images are displayed on a wide screen, the edges of the images may not 
be visible or they may become distorted. Such images should be viewed as with an aspect ratio of 4:3 in the original format intended by the 
creator of the images.
[ZOOM]
You can adjust the image size.
When [ASPECT] is set to other than [DEFAULT] and [THROUGH]
1) Press  as to select [ZOOM].
2)  
Press the  button.
 fThe 

[ZOOM] screen is displayed.
3)
 
Press 
 as to select [INTERLOCKED].
4)
 
Press 
 qw to switch the item.
[OFF] Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.
[ON] Uses [BOTH] to set zoom ratio. Image can be enlarged or reduced vertically and horizontally at the 
same magnification.
5) Press 
as to select [VERTICAL] or [HORIZONTAL].
 fIf [ON] is selected, select [BOTH].
6)

 
Press 
 qw to adjust.
Note
 f When [ASPECT] is set to [THROUGH], [ZOOM] cannot be adjusted.   
						

							Chapter 4 Settings — [POSITION] menu
ENGLISH - 93
When [ASPECT] is set to [DEFAULT]
1) Press as to select [ZOOM].
2)  
Press the  button.
 fThe 

[ZOOM] screen is displayed.
3)
 
Press 
 as to select [MODE].
4)
 
Press 
 qw to switch the item.
[INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMA T].
[FULL] Enlarges or reduces the size using the entire display area set with [SCREEN FORMA T].
5) Press as to select [INTERLOCKED].
6)  
Press 
 qw to switch the item.
[OFF] Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.
[ON] Uses [BOTH] to set zoom ratio. Image can be enlarged or reduced vertically and horizontally at the 
same magnification.
7) Press 
as to select [VERTICAL] or [HORIZONTAL].
 fIf [ON] is selected, select [BOTH].
8)

 
Press 
 qw to adjust.
Note
 f When [ASPECT] is not set to [DEF AULT], [MODE] is not displayed.
[CLOCK PHASE]
You can adjust to achieve an optimal image when there is a flickering image or smeared outlines.
1)
 
Press 
 as to select [CLOCK PHASE].
2)
 
Press 
 qw or the  button.
 fThe 

[CLOCK PHASE] individual adjustment screen is displayed.
3)
 
Press 
 qw to adjust.
 fAdjustment value will change between [0] and [+31]. 

Adjust so that the amount of interference is at a 
minimum.
Note
 f Some signals may not be adjusted. fOptimal value may not be achieved if the output from the input computer \
is unstable. fOptimal value may not be achieved when there is a shift in the total dot\
 numbers. f[CLOCK PHASE] can be adjusted only when a signal is input to the  terminal or the  terminal. f[CLOCK PHASE] cannot be adjusted when a digital signal is input. fIf you press 

w while the adjustment value is [+31], the value will become [0]. If you press  q while the adjustment value is [0], the value will 
become [+31].
[GEOMETRY]
You can correct various types of distortion in a projected image.
Unique image processing technology enables projection of a square image on a special screen shape.
1)
 
Press 
 as to select [GEOMETRY].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Does not perform geometric adjustment.
[KEYSTONE] Adjusts any trapezoidal distortion in the projected image.
[CORNER CORRECTION] Adjusts any distortion in the four corners of the projected image.
[CURVED] Adjusts any curved distortion in the projected image.   
						

							Chapter 4 Settings — [POSITION] menu
94 - ENGLISH
[PC-1]*1
Performs geometric adjustment using a computer.
[PC-2]*1
[PC-3]*1
*1 Only for PT- DZ21K2, PT- DS20K2
Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer . Up to three geometric adjustments 
performed using the computer can be saved.
Setting [KEYSTONE] or [CURVED]
1) Press  as to select [GEOMETRY].
2)  
Press 
 qw to select [KEYSTONE] or [CURVED].
3)
 
Press the  button.
 fThe 

[GEOMETRY:KEYSTONE] or [GEOMETRY:CURVED] screen is displayed.
4)
 
Press 
 as to select the item to adjust.
5)
 
Press 
 qw to adjust.
[KEYSTONE]
[LENS THROW RATIO]
Set the throw ratio for the lens used.
[VERTICAL KEYSTONE]
[HORIZONTAL KEYSTONE]
[VERTICAL BALANCE][HORIZONTAL BALANCE]
Adjust the setting according to the lens shift range in the vertical 
direction. Adjust the setting according to the lens shift range in the horizontal 
direction.
[CURVED]
[LENS THROW RATIO]
Set the throw ratio for the lens used.
[VERTICAL KEYSTONE]
[HORIZONTAL KEYSTONE]
[VERTICAL ARC][HORIZONTAL ARC]   
						

							Chapter 4 Settings — [POSITION] menu
ENGLISH - 95
[CURVED]
[VERTICAL BALANCE]
[HORIZONTAL BALANCE]
[MAINTAIN ASPECT RATIO]
Select [ON] to correct while keeping the aspect ratio.
Setting [CORNER CORRECTION]
1) Press  as to select [GEOMETRY].
2)  
Press 
 qw to select [CORNER CORRECTION].
3)
 
Press the  button.
 fThe 

[GEOMETRY:CORNER CORRECTION] screen is displayed.
4)
 
Press 
 as to select the item to adjust, and press the  button.
5)
 
Press 
 asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT]
[UPPER RIGHT][LOWER LEFT][LOWER RIGHT]
[LINEARITY]
Horizontal direction
Vertical direction
Note
 f The menu or logo may run of f the screen when [GEOMETRY] is set. fIf [EDGE BLENDING] ( x
  page   98) adjustment and [GEOMETRY] are used together, correct edge blending adjustment may not be 
possible in certain environments.
 f The optional Upgrade Kit (Model No.: ET-

UK20) can be used to expand the correctable range. To purchase the product, consult your dealer. 
(Only for PT
-

DZ21K2, PT
-
 DS20K2)
 fThe image may disappear for a moment while performing adjustment, but it\
 is not a malfunction.   
						

							Chapter 4 Settings — [ADVANCED MENU] menu
96 - ENGLISH
[ADVANCED MENU] menu
On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   77) for the operation of the menu screen.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance the image quality by performing cinema processing when 
the PAL (or SECAM) 576i signal, the NTSC 480i signal, and 1080/50i, 1080/60i are input.
1)
 
Press 
 as to select [DIGITAL CINEMA REALITY].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO] Automatically detects the input signal and performs cinema processing.
[OFF] Does not perform cinema processing.
[30p FIXED] During 480i or 1080/60i signal 
input
Performs forced cinema processing (2:2 pulldown).
[25p FIXED] During 576i or 1080/50i signal 
input
Note
 f
In [DIGITAL CINEMA REALITY], the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30p 
FIXED]. (Vertical resolution will degrade.)
 f [DIGIT

AL CINEMA REALITY] cannot be set when [FRAME RESPONSE] is set to [FAST], or when [FRAME RESPONSE] is set to 
[COMPATIBLE] and [COMPATIBLE MODE] is set to [FAST].
[BLANKING]
You can adjust the blanking width if there are noises at the edge of the \
screen or the image is slightly running out 
from the screen while an image from the VCR or other devices are projected.
1)
 
Press 
 as to select [BLANKING].
2)
 
Press the  button.
 fThe 

[BLANKING] adjustment screen is displayed.
3)
 
Press 
 as to select [UPPER], [LOWER], [LEFT], or [RIGHT].
 fWhen [CUST

OM MASKING] is set to an item other than [OFF] ([PC-1], [PC-2], or [PC-3]), the blanking 
width can be adjusted to any shape using the computer. Up to three blanking settings adjusted using the 
computer can be saved. (Only for PT
-

DZ21K2, PT
-
 DS20K2)
To use the [CUSTOM MASKING] function, the optional Upgrade Kit (Model No.: ET
-

UK20) is required. To 
purchase the product, consult your dealer.
4)
 
Press 
 qw to adjust the blanking width.
Blanking correction Item Operation AdjustmentRange of adjustment
Top of the screen [UPPER] Press q.
The blanking zone 
moves upward.
PT-
DZ21K2: Top to bottom 
0 - 599
PT
-

DS20K2: Top to bottom  0 - 524
PT
-

DW17K2: Top to bottom  0 - 383
PT
-

DZ16K2: Top to bottom  0 - 539
Press w.
The blanking zone 
moves downward.
Bottom of the  screen [LOWER]Press w.
The blanking zone 
moves upward.
Press q.The blanking zone 
moves downward.   
						

							Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 97
Blanking correction Item OperationAdjustmentRange of adjustment
Left side of the  screen [LEFT]Press w.
The blanking zone 
moves to the right.
PT-
DZ21K2: Left to right 
0 - 959
PT
-

DS20K2: Left to right  0 - 699
PT
-

DW17K2: Left to right  0 - 682
PT
-

DZ16K2: Left to right  0 - 959
Press q.
The blanking zone 
moves to the left.
Right side of the  screen [RIGHT]Press q.
The blanking zone 
moves to the right.
Press w.The blanking zone 
moves to the left.
[INPUT RESOLUTION]
You can adjust to achieve an optimal image when there is a flickering image or smeared outlines.
1)
 
Press 
 as to select [INPUT RESOLUTION].
2)
 
Press the  button.
 fThe 

[INPUT RESOLUTION]  screen is displayed.
3)
 
Press 
 as to select [TOTAL DOTS], [DISPLAY DOTS], [TOTAL LINES], or [DISPLAY LINES], and press 
qw to adjust each item.
 f V

alues corresponding to the signal being input are displayed automatically for each item. Increase or 
decrease the displayed values and adjust to the optimal point viewing th\
e screen when there are vertical 
stripes or sections are missing from the screen.
Note
 f Previously mentioned vertical banding will not occur with all white sign\
al input. fThe image may be disrupted while performing the adjustment, but it is no\
t a malfunction. f[INPUT

 RESOLUTION] can be adjusted only when an RGB signal is input to the  terminal or the  terminal.
 fSome signals may not be adjusted.
[CLAMP POSITION]
You can adjust the optimal point when the black part of the image is blun\
t or it has turned green.
1)
 
Press 
 as to select [CLAMP POSITION].
2)
 
Press 
 qw to adjust.
Status Rough guide for optimal value Range of adjustment
The black part is blunt. The point where bluntness of the black part improves the most is 
the optimal value.
1 - 255
The black part is green. The point where the green part becomes black, and the bluntness 
has improved is the optimal value.
Note
 f
[CLAMP POSITION] can be adjusted only when a signal is input to the  terminal or the  terminal. fAdjustment is not available depending on the signal.   
						

							Chapter 4 Settings — [ADVANCED MENU] menu
98 - ENGLISH
[EDGE BLENDING]
The edge blending function allows multiple projector images to be seamle\
ssly overlapped by using the inclination 
of the brightness at the overlapped area.
1) 
Press 
 as to select [EDGE BLENDING].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Sets the edge blending function to off.
[ON] Use the setting value preset in the projector for the inclination of the\
 edge blending area.
[USER] Use the user-setting value for the inclination of the edge blending area. (Configuration/registration 
requires separate software. Consult your dealer.)
 f
To adjust edge blending, proceed to Step  3).
3)
 
When [ON] or [USER] is selected, press the  button.
 f The 

[EDGE BLENDING] screen is displayed.
4)
 
Press 
 as to specify the location to be corrected.
 fWhen joining at top: Set [UPPER] to [ON]
 fWhen joining at bottom: Set [LOWER] to [ON]
 fWhen joining at left: Set [LEFT] to [ON]
 fWhen joining at right: Set [RIGHT] to [ON]
5)

 
Press 
 qw to switch to [ON].
6)
 
Press 
 as to select [START] or [WIDTH].
7)
 
Press 
 qw to adjust the starting position or correction width.
8)
 
Press 
 as to select [MARKER].
9)
 
Press 
 qw to switch to [ON].
 fA

 marker for image position adjustment is displayed. The position where the red and green lines overlap for 
the projectors to be joined will be the optimal point. Make sure to set the correction width for the projectors 
to be joined with the same value. Optimal joining is not possible with p\
rojectors that have different 
correction widths.
The optimal point is the point at which these lines overlap.
Green lineRed line
10) Press  as to select [BRIGHTNESS ADJUST].
11)  
Press the  button.
 fThe 

[BRIGHTNESS ADJUST] screen is displayed.
 fBy setting [AUT

O TESTPATTERN] to [ON] on the  [EDGE BLENDING] screen, the black test pattern is 
displayed when you enter the  [BRIGHTNESS ADJUST] screen.
12)
 
Press 
 as to select [NON-OVERLAPPED BLACK LEVEL].
13)
 
Press the  button.
 fThe 

[NON-OVERLAPPED BLACK LEVEL] screen is displayed.
 f[RED], [GREEN], and [BLUE] can be adjusted individually if [INTERLOCKED] is set to [OFF].   
						

							Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 99
14) Press as to select an item, and press qw to adjust the setting.
 fOnce the adjustment is completed, press the  button to return to the  [BRIGHTNESS ADJUST]

 
screen.
15)
 
Press 
 as to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [BLACK BORDER WIDTH].
16)
 
Press 
 qw to set the region (width) of the [BLACK BORDER WIDTH] adjustment.
 fWhen PT-

DZ21K2, PT
-
 DS20K2, or PT
-
 DZ16K2 is used, proceed to Step 17).
 fWhen PT-

DW17K2 is used, proceed to Step  19).
17)
 
Press 
 as to select [UPPER KEYSTONE AREA], [LOWER KEYSTONE AREA], [LEFT KEYSTONE 
AREA], or [RIGHT KEYSTONE AREA].
18)
 
Press 
 qw to adjust the tilt of the border between [NON-OVERLAPPED BLACK LEVEL] a\
nd [BLACK 
BORDER LEVEL].
19)
 
Press 
 as to select [BLACK BORDER LEVEL].
20)
 
Press the  button.
 fThe 

[BLACK BORDER LEVEL] screen is displayed.
 f[RED], [GREEN], and [BLUE] can be adjusted individually if [INTERLOCKED] is set to [OFF].
21)

 
Press 
 as to select an item, and press qw to adjust the setting.
 fOnce the adjustment is completed, press the  button to return to the  [BLACK BORDER LEVEL]

 
screen.
22)
 
Press 
 as to select [UPPER], [LOWER], [LEFT], or [RIGHT] for [OVERLAPPED BLACK LEVEL].
23)
 
Press the  button.
 fThe 

[OVERLAPPED BLACK LEVEL] screen is displayed.
 f[RED], [GREEN], and [BLUE] can be adjusted individually if [INTERLOCKED] is set to [OFF].
24)

 
Press 
 as to select an item, and press qw to adjust the setting.
[BLACK BORDER WIDTH] (Right)
Projection range Edge blending [WIDTH] (Right)
[MARKER] (Red)Edge blending [START] (Right)
([MARKER] (Green))
[BLACK BORDER LEVEL] [OVERLAPPED BLACK LEVEL] (Right)
[NON-OVERLAPPED BLACK LEVEL]
Note
 f [BRIGHTNESS  ADJUST] is a function that makes the increased brightness in black level of the overlapping image area difficult to notice 
when [EDGE BLENDING] is used to configure multiple screens. The optimal point of correction is set by adjusting [NON-OVERLAPPED 
BLACK LEVEL] so the black level of the overlapping image area will be the same level as the non-overlapping area. If the border area of the 
part where the image is overlapping and the non-overlapping part gets brighter after adjusting [NON-OVERLAPPED BLACK LEVEL], adjust 
the width of the top, bottom, left, or right. Adjust [BLACK BORDER LEVEL] when the width adjustment makes only the border area darker.
 f The joining 

part may look discontinuous depending on the position you are looking from when a screen with high gain or rear screen is used.
 fWhen configuring multiple screens using both horizontal and vertical edge blending, adjust [OVERLAPPED BLACK LEVEL] first before 
making adjustments in Step  12)

. Adjustment method is same as the procedure of [NON-OVERLAPPED BLACK LEVEL].
 fIf only horizontal or vertical edge blending is used, set all items in [OVERLAPPED BLACK LEVEL] to 0. fThe [AUT

O TESTPATTERN] setting changes synchronizing with [AUTO TESTPATTERN] of [COLOR MATCHING].
 fAdjustment of the tilt of the border between [NON-OVERLAPPED BLACK LEVEL] and [BLACK BORDER LEVEL] is a function to perform 
the adjustment of [GEOMETR

Y] (x   page   93) together with the edge blending. If [NON-OVERLAPPED BLACK LEVEL] is tilted by 
correcting the keystone from [KEYSTONE] in [GEOMETRY], perform Steps 17) and 18) to adjust the edge blending according to the shape 
of [NON-OVERLAPPED BLACK LEVEL].
[FRAME RESPONSE]
Set image frame delay.
1)
 
Press 
 as to select [FRAME RESPONSE].   
						

							Chapter 4 Settings — [ADVANCED MENU] menu
100 - ENGLISH
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[NORMAL] Standard setting.
[FAST]
*1Simplifies the image processing to reduce image frame delay.
[FIXED] Sets image frame delay to be constant regardless of the image position or magnification.
[COMPATIBLE]
*2Sets to DZ21K series compatible frame delay.
DZ21K series: DZ21K series, DS20K series, DZ16K series
*1 When input signals are other than interlaced signals, [F AST] cannot be set.
*2  
Only for PT-
 DZ21K2, PT
-
 DS20K2, PT
-
 DZ16K2
 fWhen [COMP ATIBLE] is selected, proceed to Step 3).
3)
 
Press the  button.
4)

 
Press 
 qw to switch the [COMPATIBLE MODE] setting.
 fThe items will switch each time you press the button.
[NORMAL] Standard setting compatible with DZ21K serires.
[FAST] Reduces the image frame delay with the DZ21K series compatible setting.
Note
 f[DIGITAL CINEMA REALITY] cannot be set when [FRAME RESPONSE] is set to [FAST], or when [FRAME RESPONSE] is set to 
[COMPATIBLE] and [COMPATIBLE MODE] is set to [FAST].
 f [FRAME RESPONSE] cannot be set during P

 IN P.
 f[COMP

ATIBLE MODE] cannot be set when [FRAME RESPONSE] is set to [NORMAL], [FAST], or [FIXED].
[FRAME CREATION]
(Only for PT- DZ21K2, PT- DS20K2, PT- DZ16K2)
Set the amount of image frame interpolation.
The image with fast movement can be displayed more smoothly by automatic\
ally generating the intermediate 
frame from the previous and next frame. 
1)
 
Press 
 as to select [FRAME CREATION].
2)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Disables the frame creation function. 
[1] Sets the amount of interpolation weaker.
[2] Sets the amount of interpolation midway. (Factory default)
[3] Sets the amount of interpolation stronger.
Note
 fThe effect may be difficult to notice depending on the image. fSwitch the setting when the image looks unnatural due to delay of image \
or generation of noise. fThe [FRAME CREA

TION] setting will be disabled and cannot be selected when [FRAME RESPONSE] is set to [F AST] or [COMPATIBLE].
 fThe [FRAME CREA

TION] setting will be disabled and cannot be selected when the [3D SETTINGS] menu  → [3D SYSTEM SETTING] 
(x
  page   103) is set to [DUAL (LEFT)] or [DUAL (RIGHT)].
 fThe [FRAME CREA

TION] setting will be disabled and cannot be selected when the [3D SETTINGS] menu  → [3D INPUT FORMAT] 
(x
  page   104) is set to [AUTO], [SIMULTANEOUS], [SIDE BY SIDE], [TOP AND BOTTOM], [LINE BY LINE], or [FRAME SEQUENTIAL]. In 
[AUTO], the setting will be disabled only when 3D format can be recognized. (Only for PT
-

DZ21K2, PT
-
 DS20K2)
 fThe [FRAME CREA

TION] setting will be disabled and cannot be selected when the [DISPLA Y OPTION] menu → [SIMUL INPUT SETTING] 
(x
  page   112) is set to [AUTO(3D)] or [AUTO(2D)] and the image in simultaneous format is displayed.
 fThis function is disabled when the internal test pattern or [3D  TEST

 PATTERN] is displayed.
[FRAME LOCK]
(Only for PT-DZ21K2, PT- DS20K2)
Set this function to display the image in 3D when the vertical scanning frequency of the signal is 25   Hz, 50   Hz, 
and 100
  Hz.
1)
 
Press 
 as to select [FRAME LOCK].