Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

							Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 111
Adjusting position automatically
1) Press as to select [AUTO SETUP].
2)  
Press the  button.
 fThe 

[AUTO SETUP] screen is displayed.
3)
 
Press 
 as to select [POSITION ADJUST].
4)
 
Press 
 qw to switch the item.
[ON] Adjust the screen position and size when automatic setup is executed.
[OFF] Does not perform automatic adjustment.
Adjusting signal level automatically
1) Press as to select [AUTO SETUP].
2)  
Press the  button.
 fThe 

[AUTO SETUP] screen is displayed.
3)
 
Press 
 as to select [SIGNAL LEVEL ADJUST].
4)
 
Press 
 qw to switch the item.
[OFF] Does not perform automatic adjustment.
[ON] Adjusts black level (on-screen menu [BRIGHTNESS]) and white level (on-screen menu 
[CONTRAST]) when automatic setup is executed.
Note
 f
[SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.
[BACKUP INPUT SETTING]
Set the backup function that switches the signal to the backup input sig\
nal as seamless as possible when input 
signal is disrupted.
1)
 
Press 
 as to select [BACKUP INPUT SETTING].
2)
 
Press the  button.
 fThe 

[BACKUP INPUT SETTING]  screen is displayed.
3)
 
Press 
 as to select [BACKUP INPUT MODE].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Disables the backup function.
[ON]
*1/[1]*2
Enables the backup function between the DVI-D input and the HDMI input.
The input is switched as seamless as possible when the same signal is in\
put to the primary and 
secondary inputs.
Primary input is fixed to the  terminal, and the secondary input is fixed to the  
terminal.
[2]
*2
Enables the backup function between the SDI1 input and the SDI2 input.
The input is switched as seamless as possible when the same signal is in\
put to the primary and 
secondary inputs.
Primary input is fixed to the  terminal, and the secondary input is fixed to the  
terminal.
*1 Only for PT- DW17K2, PT- DZ16K2
*2  
Only for PT-
 DZ21K2, PT
-
 DS20K2
5) Press as to select [AUTOMATIC SWITCHING].
 fWhen [BACKUP

 INPUT MODE] is set to [OFF], [AUTOMATIC SWITCHING] cannot be selected.   
						

							Chapter 4 Settings — [DISPLAY OPTION] menu
112 - ENGLISH
6) Press qw to switch the item.
 fThe items will switch each time you press the button.
[ENABLE] Switches to the secondary input automatically when the input signal for \
primary input is disrupted.
[DISABLE] Disables the automatic input switching function.
Note
 fThe backup function is enabled when [BACKUP  INPUT MODE] is set to [ON] or [1], and same signal is input to the  terminal and 
the  terminal.
Alternatively, the backup function is enabled when [BACKUP INPUT MODE] is set to [2], and same signal is input to the  terminal 
and the .
 f T

o switch to the backup input signal using the backup function, make sure that the following three conditions are satisfied to be ready to use 
the function.
 g Set [BACKUP

 INPUT MODE] to [ON] or [1], [2].
 gInput the same signal to the primary and secondary inputs. gDisplay the image of the primary input. fIf the input is switched to other than the primary or secondary input wh\
ile the backup function is ready for use, the state of readiness to use \
the backup function is canceled. 

To switch to the backup input signal using the backup function again, swi\
tch to the primary input.
 f[BACKUP

 INPUT STATUS] is displayed in input guide ( x
  page   119) and [STATUS] screen (x pages 74, 137) when [BACKUP INPUT 
MODE] is set to [ON] or [1], [2].
When switching to the backup input signal is possible using the backup function, [ACTIVE] is displayed in [BACKUP  INPUT STATUS]. When 
it is not possible, [INACTIVE] is displayed instead.
When [BACKUP INPUT STATUS] is [ACTIVE] while the image of the primary input is displayed, the secondary input becomes the backup 
input.
When [BACKUP INPUT STATUS] is [ACTIVE] while the image of the secondary input is displayed, the primary input becomes the backup 
input.
 f If [BACKUP

 INPUT MODE] is set to [ON] or [1], the input is switched seamlessly when the inputs of DVI - D and HDMI are switched while 
switching to the backup input signal is possible.
 f If [BACKUP

 INPUT MODE] is set to [2], the input is switched seamlessly when the inputs of SDI1 and SDI2 are switched while switching to 
the backup input signal is possible.
 f When [AUT

OMATIC SWITCHING] is set to [ENABLE], and [BACKUP INPUT STATUS] is [ACTIVE], the signal is switched to the backup 
input if the input signal is disrupted.
 f When [AUT

OMATIC SWITCHING] is set to [ENABLE] and the signal is automatically switched to the backup input due to disruption of the 
input signal, [BACKUP INPUT STATUS] changes to [INACTIVE]. In this case, switching to the backup input signal is not possible until the 
original input signal is restored. If the signal is automatically switch\
ed to the backup input, switching to the backup input signal becomes 
possible when the original input signal is restored. In this case, the c\
urrent input is retained.
 f [BACKUP

 INPUT SETTING] cannot be set during P IN P. The backup operation is not performed either.
 f[BACKUP

 INPUT SETTING] cannot be set when the [DISPLAY OPTION] menu  → [SIMUL INPUT SETTING] → [HDMI/DVI-D] or [SDI1/
SDI2] is set to anything other than [OFF]. The backup operation is not performed either.
 f [BACKUP

 INPUT SETTING] cannot be set when the [DISPLAY OPTION] menu  → [SDI IN] → [SDI LINK] is set to [DUAL LINK] or [AUTO]. 
The backup operation is not performed either.
[SIMUL INPUT SETTING]
Set this function when the video signal in simultaneous format is input \
and used.
1)
 
Press 
 as to select [SIMUL INPUT SETTING].
2)
 
Press the  button.
 fThe 

[SIMUL INPUT SETTING]  screen is displayed.
3)
 
Press 
 as button to select [RGB1/RGB2], [HDMI/DVI-D], or [SDI1/SDI2].
 f[RGB1/RGB2] and [SDI1/SDI2] can be selected only on PT-

DZ21K2 and PT
-
 DS20K2.
4)
 
Press 
 qw to switch the setting.
 fThe items will switch each time you press the button.
[OFF] This is not used for simultaneous input.
[AUTO(3D)] Displays 3D images of the simultaneous format.
[AUTO(2D)]
*1Displays 2D image of the simultaneous format.
*1 This can be set only when [SIMUL  INPUT SETTING] is set to [HDMI/DVI-D] or [SDI1/SDI2].
Note
 fIf [AUTO(2D)] is set, 2D images are displayed when the same 2D compatible signals are entered to each input. fWhen [AUT
O(3D)] is set, 3D images are displayed when the same 3D compatible signals are entered to each input. (Only for PT- DZ21K2, 
PT
-

DS20K2)
 f[SIMUL

 INPUT SETTING] cannot be set during P IN P.
 f[SIMUL

 INPUT SETTING] cannot be set when [BACKUP INPUT MODE] is set to anything other than [OFF].
 fThis may not function properly for some connected external devices.   
						

							Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 113
 fThis may not function properly depending on the signal. fUsage of each input signal is displayed in [RGB1] and [RGB2], in [HDMI] and [DVI-D], and in [SDI1] and [SDI2] of the  [SIMUL
 INPUT 
SETTING] screen when [AUTO(3D)] or [AUTO(2D)] is set.
[SIMUL INPUT SETTING] Usage of the input signal Details
[AUTO(3D)] [LEFT INPUT]
Uses the signal for the corresponding input as a signal for the left 
eye image.
[RIGHT INPUT] Uses the signal for the corresponding input as a signal for the right 
eye image.
[AUTO(2D)]
*1[1st FRAME INPUT] Uses the signal for the corresponding input as a signal for the odd 
frame.
[2nd FRAME INPUT] Uses the signal for the corresponding input as a signal for the even 
frame.
*1 This can be set only when [SIMUL
 INPUT SETTING] is set to [HDMI/DVI-D] or [SDI1/SDI2].
[RGB IN]
Set to match the signal to input to the  terminal.
Setting [RGB1 INPUT SETTING]
1) Press as to select [RGB IN].
2)  
Press the  button.
 fThe 

[RGB IN] screen is displayed.
3)
 
Press 
 as to select [RGB1 INPUT SETTING].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[RGB/YPBPR] Select this item when an RGB signal or YCBCR/YPBPR signal is input to the  terminal.
[VIDEO] Select this item when a video signal is input to the  () terminal.
[Y/C] Select this item when a luminance signal and color signal are input to the  (, ) terminal.
Switching the slice level of an input sync signal
1) Press  as to select [RGB IN].
2)  
Press the  button.
 fThe 

[RGB IN] screen is displayed.
3)
 
Press 
 as to select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL].
4)
 
Press 
 qw to switch the item.
[LOW] Sets the slice level to [LOW].
[HIGH] Sets the slice level to [HIGH].
Setting [RGB2 EDID MODE]
1) Press as to select [RGB IN].
2)  
Press the  button.
 fThe 

[RGB IN] screen is displayed.
3)
 
Press 
 as to select [RGB2 EDID MODE].
4)
 
Press the  button.
 fThe 

[RGB2 EDID MODE] screen is displayed.
5)
 
Press 
 qw to switch [EDID MODE].
 fThe items will switch each time you press the button.   
						

							Chapter 4 Settings — [DISPLAY OPTION] menu
114 - ENGLISH
[DEFAULT]Standard setting.
[SCREEN FIT]
*1Changes EDID data according to the [SCREEN FORMAT] setting.
[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
*1 Only for PT-DZ21K2, PT- DS20K2, PT- DZ16K2
 fWhen [DEF AULT] or [SCREEN FIT] is selected, proceed to Step  10).
6)
 
Press the  button.
 f The 

[RESOLUTION] screen is displayed.
7)
 
Press 
 asqw  to select [RESOLUTION].
 fSelect [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], 
[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8)

 
Press the  button.
 f The 

[VERTICAL SCAN FREQUENCY] screen is displayed.
9)
 
Press 
 qw to select [VERTICAL SCAN FREQUENCY].
 fSelect [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
 fSelect [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
 fSelect [60Hz] or [50Hz] when anything other than [1920x1080p] or [1920x1080i] is selected for 
[RESOLUTION].
10)

 
Press the  button.
 f The confirmation screen is displayed.
1

1)
 
Press 
 qw to select [OK], and press the  button.
Note
 f The setting details are displayed in [RESOLUTION] and [VER TICAL SCAN FREQUENCY] of [EDID STATUS]. fThe resolution and vertical scanning frequency settings may also be required on your computer or video device. fAfter configuring settings, your computer or video device or the projector may be required to be turned of f and on. fA

 signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or video 
device.
[DVI-D IN]
Switch the setting when the external device is connected to the  terminal of the projector and the 
image is not projected correctly.
1)
 
Press 
 as to select [DVI-D IN].
2)
 
Press the  button.
 fThe 

[DVI-D IN] screen is displayed.
3)
 
Press 
 as to select [EDID SELECT].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[EDID3] Recognizes movie-based video signals and still image signals automatically .
[EDID1] Select this item mainly when an external device that outputs movie-based video signals (such as a 
Blu-ray disc player) is connected to the  terminal.
[EDID2:PC] Select this item mainly when an external device that outputs still image-based video signals (such as 
a computer) is connected to the  terminal.
5) Press 
as to select [SIGNAL LEVEL].
6)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO] Automatically sets the signal level.
[0-255:PC] Select this item when the signal output from the DVI
- D terminal of an external device (such as a 
computer) is input to the  terminal.
[16-235] Select this item when the signal output from the HDMI terminal of an external device (Blu-ray disc 
player, etc.) is input to the  terminal using a conversion cable, etc.   
						

							Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 115
Note
 fThe optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the 
external device regarding the output of the external device.
 fThe data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” ( x

  page   209) for a resolution that 
supports plug and play.
Setting [EDID MODE]
1) Press  as to select [DVI-D IN].
2)  
Press the  button.
 fThe 

[DVI-D IN] screen is displayed.
3)
 
Press 
 as to select [EDID MODE].
4)
 
Press the  button.
 fThe 

[DVI-D EDID MODE] screen is displayed.
5)
 
Press 
 qw to switch [EDID MODE].
 fThe items will switch each time you press the button.
[DEFAULT] Standard setting.
[SCREEN FIT]
*1Changes EDID data according to the [SCREEN FORMAT] setting.
[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
*1 Only for PT-DZ21K2, PT- DS20K2, PT- DZ16K2
 fWhen [DEF AULT] or [SCREEN FIT] is selected, proceed to Step  10).
6)
 
Press the  button.
 f The 

[RESOLUTION] screen is displayed.
7)
 
Press 
 asqw  to select [RESOLUTION].
 fSelect [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], 
[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8)

 
Press the  button.
 f The 

[VERTICAL SCAN FREQUENCY] screen is displayed.
9)
 
Press 
 qw to select [VERTICAL SCAN FREQUENCY].
 fSelect [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
 fSelect [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
 fSelect [60Hz] or [50Hz] when anything other than [1920x1080p] or [1920x1080i] is selected for 
[RESOLUTION].
10)

 
Press the  button.
 f The confirmation screen is displayed.
1

1)
 
Press 
 qw to select [OK], and press the  button.
Note
 f The setting details are displayed in [RESOLUTION] and [VER TICAL SCAN FREQUENCY] of [EDID STATUS]. fThe resolution and vertical scanning frequency settings may also be required on your computer or video device. fAfter configuring settings, your computer or video device or the projector may be required to be turned of f and on. fA

 signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or video 
device.
[HDMI IN]
Switch the setting when the external device is connected to the  terminal of the projector and the 
image is not projected correctly.
1)
 
Press 
 as to select [HDMI IN].
2)
 
Press the  button.
 fThe 

[HDMI IN] screen is displayed.   
						

							Chapter 4 Settings — [DISPLAY OPTION] menu
116 - ENGLISH
3) Press as to select [SIGNAL LEVEL].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO] Automatically sets the signal level.
[64-940] Select this item when the signal output from the HDMI terminal of an external device (such as a Blu-
ray disc player) is input to the  terminal.
[0-1023] Select this item when the signal output from the DVI
- D terminal of an external device (such as a 
computer) is input to the  terminal via a conversion cable or similar cable.
Select this item also when the signal output from the HDMI terminal of a computer or other device is 
input to the  terminal.
Note
 f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the 
external device regarding the output of the external device.
 fThe HDMI signal level is displayed for 30

  bits of input.
Setting [EDID MODE]
1) Press as to select [HDMI IN].
2)  
Press the  button.
 fThe 

[HDMI IN] screen is displayed.
3)
 
Press 
 as to select [EDID MODE].
4)
 
Press the  button.
 fThe 

[HDMI EDID MODE] screen is displayed.
5)
 
Press 
 qw to switch [EDID MODE].
 fThe items will switch each time you press the button.
[DEFAULT] Standard setting.
[SCREEN FIT]
*1Changes EDID data according to the [SCREEN FORMAT] setting.
[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
*1 Only for PT-DZ21K2, PT- DS20K2, PT- DZ16K2
 fWhen [DEF AULT] or [SCREEN FIT] is selected, proceed to Step  10).
6)
 
Press the  button.
 f The 

[RESOLUTION] screen is displayed.
7)
 
Press 
 asqw  to select [RESOLUTION].
 fSelect [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], 
[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8)

 
Press the  button.
 f The 

[VERTICAL SCAN FREQUENCY] screen is displayed.
9)
 
Press 
 qw to select [VERTICAL SCAN FREQUENCY].
 fSelect [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
 fSelect [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
 fSelect [60Hz] or [50Hz] when anything other than [1920x1080p] or [1920x1080i] is selected for 
[RESOLUTION].
10)

 
Press the  button.
 f The confirmation screen is displayed.
1

1)
 
Press 
 qw to select [OK], and press the  button.
Note
 f The setting details are displayed in [RESOLUTION] and [VER TICAL SCAN FREQUENCY] of [EDID STATUS]. fThe resolution and vertical scanning frequency settings may also be required on your computer or video device. fAfter configuring settings, your computer or video device or the projector may be required to be turned of f and on.   
						

							Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 117
 fA signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or video 
device.
[DIGITAL LINK IN]
Sets the signal level when DIGITAL LINK input is selected.
1)
 
Press 
 as to select [DIGITAL LINK IN].
2)
 
Press the  button.
 fThe 

[DIGITAL LINK IN] screen is displayed.
3)
 
Press 
 as to select [SIGNAL LEVEL].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO] Automatically sets the signal level.
[64-940] Select this item when the signal output from the HDMI terminal of an external device (Blu-ray disc 
player, etc.) is input to the  terminal via a twisted-pair-cable transmitter.
[0-1023] Select this item when the signal output from the DVI
- D terminal or HDMI terminal of an external 
device (such as a computer) is input to the  terminal via a twisted-pair-cable 
transmitter.
Note
 f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the 
external device regarding the output of the external device.
 fThe signal level is displayed for 30 bits of input.
Setting [EDID MODE]
1) Press  as to select [DIGITAL LINK IN].
2)  
Press the  button.
 fThe 

[DIGITAL LINK IN] screen is displayed.
3)
 
Press 
 as to select [EDID MODE].
4)
 
Press the  button.
 fThe 

[DIGITAL LINK EDID MODE] screen is displayed.
5)
 
Press 
 qw to switch [EDID MODE].
 fThe items will switch each time you press the button.
[DEFAULT] Standard setting.
[SCREEN FIT]
*1Changes EDID data according to the [SCREEN FORMAT] setting.
[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
*1 Only for PT-DZ21K2, PT- DS20K2, PT- DZ16K2
 fWhen [DEF AULT] or [SCREEN FIT] is selected, proceed to Step  10).
6)
 
Press the  button.
 f The 

[RESOLUTION] screen is displayed.
7)
 
Press 
 asqw  to select [RESOLUTION].
 fSelect [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], 
[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8)

 
Press the  button.
 f The 

[VERTICAL SCAN FREQUENCY] screen is displayed.
9)
 
Press 
 qw to select [VERTICAL SCAN FREQUENCY].
 fSelect [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
 fSelect [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
 fSelect [60Hz] or [50Hz] when anything other than [1920x1080p] or [1920x1080i] is selected for 
[RESOLUTION].   
						

							Chapter 4 Settings — [DISPLAY OPTION] menu
118 - ENGLISH
10) Press the  button.
 fThe confirmation screen is displayed.
1

1)  
Press 
 qw to select [OK], and press the  button.
Note
 f The setting details are displayed in [RESOLUTION] and [VER TICAL SCAN FREQUENCY] of [EDID STATUS]. fThe resolution and vertical scanning frequency settings may also be required on your computer or video device. fAfter configuring settings, your computer or video device or the projector may be required to be turned of f and on. fA

 signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or video 
device.
[SDI IN]
(Only for PT- DZ21K2, PT- DS20K2, PT- DZ16K2)
Set this function in accordance with the signal input to the / terminal (PT
-
 DZ21K2, 
PT
-

DS20K2) or the  terminal (PT
-
 DZ16K2).
Setting [SDI LINK]
(Only for PT-DZ21K2, PT- DS20K2)
1)  
Press 
 as to select [SDI IN].
2)
 
Press the  button.
 fThe 

[SDI IN] screen is displayed.
3)
 
Press 
 as to select [SDI LINK].
4)
 
Press 
 qw to switch the item.
[SINGLE LINK] Sets the SDI1 input and the SDI2 input to single link.
[DUAL LINK] Sets the SDI1 input and the SDI2 input to dual link.
[AUTO] Automatically selects the single link or the dual link.
Note
 f[SDI LINK] cannot be set when [BACKUP  INPUT MODE] is set to [2]. fWhen [AUT
O] is set, either single link or dual link will be automatically selected by reading the payload ID added to the input signal. Single 
link will be selected when a payload ID is not added to the input signal\
.
Setting [SIGNAL LEVEL]
Select the amplitude of the signal to input.
1)
 
Press 
 as to select [SDI IN].
2)
 
Press the  button.
 fThe 

[SDI IN] screen is displayed.
3)
 
Press 
 as to select [SIGNAL LEVEL].
4)
 
Press 
 qw to switch the item.
[64-940] Normally use this setting.
[4-1019] Select this item when gray is displayed as black.
Setting [BIT DEPTH]
1) Press as to select [SDI IN].
2)  
Press the  button.
 fThe 

[SDI IN] screen is displayed.
3)
 
Press 
 as to select [BIT DEPTH].
4)
 
Press 
 qw to switch the item.   
						

							Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 119
[AUTO]Automatically select [12-bit] or [10-bit].
[12-bit] Fixes to [12-bit].
[10-bit] Fixes to [10-bit].
Setting [3G-SDI MAPPING]
1) Press as to select [SDI IN].
2)  
Press the  button.
 fThe 

[SDI IN] screen is displayed.
3)
 
Press 
 as to select [3G-SDI MAPPING].
4)
 
Press 
 qw to switch the item.
[AUTO] Automatically select [LEVEL A] or [LEVEL B].
[LEVEL A] Fixes to [LEVEL A].
[LEVEL B] Fixes to [LEVEL B].
Note
 fThis does not operate when the SD - SDI signal or the HD - SDI signal is input.
[ON-SCREEN DISPLAY]
Set the on-screen display.
Setting [OSD POSITION]
Set the position of the menu screen (OSD).
1)
 
Press 
 as to select [ON-SCREEN DISPLAY].
2)
 
Press the  button.
 fThe 

[ON-SCREEN DISPLAY] screen is displayed.
3)
 
Press 
 as to select [OSD POSITION].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[2] Sets to the center left of the screen.
[3] Sets to the bottom left of the screen.
[4] Sets to the top center of the screen.
[5] Sets to the center of the screen.
[6] Sets to the bottom center of the screen.
[7] Sets to the upper right of the screen.
[8] Sets to the center right of the screen.
[9] Sets to the bottom right of the screen.
[1] Sets to the upper left of the screen.
Setting [OSD ROTATION]
(Only for PT-DZ21K2, PT- DS20K2, PT- DW17K2)
Set the orientation of the menu screen (OSD).
1)
 
Press 
 as to select [ON-SCREEN DISPLAY].
2)
 
Press the  button.
 fThe 

[ON-SCREEN DISPLAY] screen is displayed.
3)
 
Press 
 as to select [OSD ROTATION].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.   
						

							Chapter 4 Settings — [DISPLAY OPTION] menu
120 - ENGLISH
[OFF]Does not rotate the screen.
[CLOCKWISE] Rotates the screen by 90° clockwise.
[COUNTERCLOCKWISE] Rotates the screen by 90° counterclockwise.
Setting [OSD DESIGN]
Set the color of the menu screen (OSD).
1)
 
Press 
 as to select [ON-SCREEN DISPLAY].
2)
 
Press the  button.
 fThe 

[ON-SCREEN DISPLAY] screen is displayed.
3)
 
Press 
 as to select [OSD DESIGN].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[1] Sets to yellow.
[2] Sets to blue.
[3] Sets to white.
[4] Sets to green.
[5] Sets to peach.
[6] Sets to brown.
Setting [OSD MEMORY]
Set hold for the position of the menu screen (OSD) cursor.
1)
 
Press 
 as to select [ON-SCREEN DISPLAY].
2)
 
Press the  button.
 fThe 

[ON-SCREEN DISPLAY] screen is displayed.
3)
 
Press 
 as to select [OSD MEMORY].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[ON] Holds the cursor position.
[OFF] Does not hold the cursor position.
Note
 fEven if [OSD MEMOR Y] is set to [ON], the cursor position will not be held when the  switch of the projector body is turned 
.
Setting [INPUT GUIDE]
Set whether to display the input guide (input terminal name, signal name, memory number , and [BACKUP INPUT 
STATUS] currently selected) in the position set in [OSD POSITION].
1)
 
Press 
 as to select [ON-SCREEN DISPLAY].
2)
 
Press the  button.
 fThe 

[ON-SCREEN DISPLAY] screen is displayed.
3)
 
Press 
 as to select [INPUT GUIDE].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[ON] Displays the input guide.
[OFF] Hides the input guide.