Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

							Chapter 6 Appendix — Technical information
ENGLISH - 211
Compatible signalResolution
(Dots) Scanning freq.Dot clock 
freq.
(MHz)Format Plug and play
*1
Horizontal
(kHz)Vertical(Hz)RGB2 DVI - D
HDMIEDID1 EDID2 EDID3
1920 x 1200 1   920   x   1   200
61.8 49.9 158.3 R/D/H ― ― ― ― ―
1   920   x   1   200* 1174.0 60.0 154.0 R/D/H
l―
l l*14l*14
1 920 x 1 200*1374.6 59.9 193.3 R― ― ― ― ―
*1 Signals with a  l  in the Plug and play columns are signals described in EDID (extended display identification data) of the projector . If a signal has no 
l in the Plug and play columns but has an entry in the Format column, it can be input. For signals without a  l in the Plug and play columns, there 
are instances when resolution cannot be selected on the computer even th\
ough the projector supports them.
*2
 
Only for single link connection
*3

 
Pixel-Repetition signal (dot clock frequency 27.0
   MHz) only
*4
 
When a 1
 125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.
*5
 
Dual link 3G
 - SDI is supported for PT
-
 DZ21K2 and PT
-
 DS20K2.
*6
 
Only for PT-
 DZ16K2
*7
 
Only for PT-
 DZ21K2, PT
-
 DS20K2
*8
 
Dual link HD
 - SDI is supported.
*9
 
Dual link 3G
 - SDI is supported.
*10
 
For PT-
 DZ21K2, PT
-
 DS20K2, when [3D INPUT FORMAT] is set to [AUTO], it is displayed as a 3D image in frame sequential format. To display 
images in 2D, set [3D INPUT FORMAT] to [NATIVE].
*11
 
VESA
  CVT-RB (Reduced Blanking)-compliant
*12
 
Only for PT-
 DW17K2
*13
 
Samples the pixels in the image processing circuit and projects the image.
*14

 
Only for PT-
 DZ21K2
Note
 fA signal with a different resolution is converted to the number of display dots. The number of display dots is as follows. gPT-
DZ21K2: 1   920   x   1   200
 gPT-

DS20K2: 1   400   x   1   050
 gPT-

DW17K2: 1   366   x   768
 gPT-

DZ16K2: 1   920   x   1   080
 fThe “i” at the end of the resolution indicates an interlaced signal. fWhen interlaced signals are connected, flickering may occur on the projected image. fDIGIT

AL LINK input compatible signal is the same as HDMI input compatible signal.
List of simultaneous input 2D compatible signals
The following table specifies the simultaneous input (2D) compatible video signals that the projector can project.
2D compatible signal Resolution
(Dots) Scanning freq.
Dot clock freq.
(MHz) HDMI/DVI
SDI1/SDI2*1Horizontal
(kHz)Vertical(Hz)
1080/50p 1   920   x   1   08056.3 50.0 148.5
ll
1080/60p 1
  920   x   1   08067.5 60.0 148.5
ll
1366
  x   768 1
  366   x   76839.6 49.9 69.0
l―
1
  366   x   76847.7 59.8 85.5
l―
1400 x 1050 1
  400   x   1   05054.1 50.0 99.9
l―
1
  400   x   1   05065.3 60.0 121.8
l―
1920
  x   1080 1
  920   x   1   08055.6 49.9 141.5
l―
1
  920   x   1   08066.6 59.9 138.5
l―
1920
  x   1200 1
  920   x   1   20061.8 49.9 158.3
l―
1
  920   x   1   20074.0 60.0 154.0
l―
*1 Only for PT-
DZ21K2, PT- DS20K2  
						

							Chapter 6 Appendix — Technical information
212 - ENGLISH
List of 3D compatible signals
(Only for PT-DZ21K2, PT- DS20K2)
The following table specifies the 3D compatible video signals that the projector can project.
 f Abbreviations for input formats and 3D formats in the table have the following meanings.
 gFP: Frame packing format
 gSBS: Side by side format
 gTB: 

Top and bottom format
 gLBL: Line by line format
 gFS: Frame sequential format
 g3G: 3G

- SDI Level B simultaneous format
 gH

- D: HDMI & DVI - D input simultaneous format
 gR1

- 2: RGB1 & RGB2 input simultaneous format
 gS1

- 2: SDI1 & SDI2 input simultaneous format
3D compatible signal Resolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) HDMI
DVI - DHorizontal
(kHz)Vertical(Hz) FPSBS*1TB FSSBS*1TB LBL FS
720/60p 1
 
280
 
x
 
720 45.0 60.0 74.3
l l l―
l l l ―
720/50p 1
 
280
 
x
 
720 37.5 50.0 74.3
l l l―
l l l ―
1080/60i 1
 
920
 
x
 
1
 
080i 33.8 60.0 74.3
l l― ―
l l― ―
1080/50i 1
 
920
 
x
 
1
 
080i 28.1 50.0 74.3
l l― ―
l l― ―
1080/24p 1
 
920
 
x
 
1
 
080 27.0 24.0 74.3
l l l―
l l ― ―
1080/24sF 1
 
920
 
x
 
1
 
080i 27.0 24.0 74.3 ― ― ― ―
l l― ―
1080/25p 1
 
920
 
x
 
1
 
080 28.1 25.0 74.3 ― ― ― ―
l l― ―
1080/30p 1
 
920
 
x
 
1
 
080 33.8 30.0 74.3 ― ― ― ―
l l― ―
1080/60p 1
 
920
 
x
 
1
 
080 67.5 60.0 148.5 ―
l l ―
l l ― ―
1080/50p 1
 
920
 
x
 
1
 
080 56.3 50.0 148.5 ―
l l ―
l l ― ―
640
 
x
 
480 640
 
x
 
480 31.5 59.9 25.2 ― ― ― ―
l― ― ―
800
 
x
 
600 800
 
x
 
600 37.9 60.3 40.0 ― ― ― ―
l― ― ―
1024 x 768 1
 
024
 
x
 
768 39.6 50.0 51.9 ― ― ― ―
l― ― ―
1
 
024
 
x
 
768 48.4 60.0 65.0 ― ― ― ―
l― ― ―
1
 
024
 
x
 
768 81.4 100.0 113.3 ― ― ―
l― ― ―
l
1
 
024
 
x
 
768 98.8 120.0 139.1 ― ― ―
l― ― ―
l
1152
 
x
 
864 1
 
152
 
x
 
864 53.7 60.0 81.6 ― ― ― ―
l― ― ―
1280
 
x
 
720 1
 
280
 
x
 
720 37.1 49.8 60.5 ― ― ― ―
l― ― ―
1
 
280
 
x
 
720 44.8 59.9 74.5 ― ― ― ―
l― ― ―
1
 
280
 
x
 
720 76.3 100.0 131.8 ― ― ―
l― ― ―
l
1
 
280
 
x
 
720 92.6 120.0 161.6 ― ― ―
l― ― ―
l
1280
 
x
 
768 1
 
280
 
x
 
768 39.6 49.9 65.3 ― ― ― ―
l― ― ―
1
 
280
 
x
 
768 47.8 59.9 79.5 ― ― ― ―
l― ― ―
1
 
280
 
x
 
768
*247.4 60.0 68.3 ― ― ― ―
l― ― ―
1280
 
x
 
800 1
 
280
 
x
 
800 41.3 50.0 68.0 ― ― ― ―
l― ― ―
1
 
280
 
x
 
800 49.7 59.8 83.5 ― ― ― ―
l― ― ―
1
 
280
 
x
 
800
*249.3 59.9 71.0 ― ― ― ―
l― ― ―
1280
 
x
 
960 1
 
280
 
x
 
960 60.0 60.0 108.0 ― ― ― ―
l― ― ―
1280
 
x
 
1024 1
 
280
 
x
 
1
 
024 52.4 50.0 88.0 ― ― ― ―
l― ― ―
1
 
280
 
x
 
1
 
024 64.0 60.0 108.0 ― ― ――
l― ― ―
1366

 
x
 
768 1
 
366
 
x
 
768 47.7 59.8 85.5 ― ― ― ―
l― ― ―
1
 
366
 
x
 
768 39.6 49.9 69.0 ― ― ― ―
l― ― ―
1400 x 1050 1
 
400
 
x
 
1
 
050 54.1 50.0 99.9 ― ― ― ―
l― ― ―
1
 
400
 
x
 
1
 
050 64.0 60.0 108.0 ― ― ― ―
l― ― ―
1
 
400
 
x
 
1
 
050 65.2 60.0 122.6 ― ― ― ―
l― ― ―
1
 
400
 
x
 
1
 
050 65.3 60.0 121.8 ― ― ― ―
l― ― ―
1440
 
x
 
900 1
 
440
 
x
 
900 55.9 59.9 106.5 ― ― ― ―
l― ― ―
1
 
440
 
x
 
900 46.3 49.9 86.8 ― ― ― ―
l― ― ―  
						

							Chapter 6 Appendix — Technical information
ENGLISH - 213
3D compatible signal Resolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) HDMI
DVI - DHorizontal
(kHz)Vertical(Hz) FPSBS*1TB FSSBS*1TB LBL FS
1600
 
x
 
900 1
 
600
 
x
 
900 46.4 49.9 96.5 ― ― ― ―
l― ― ―
1
 
600
 
x
 
900 55.9 60.0 119.0 ― ― ― ―
l― ― ―
1600
 
x
 
1200 1
 
600
 
x
 
1
 
200 75.0 60.0 162.0 ― ― ― ―
l― ― ―
1
 
600
 
x
 
1
 
200 61.8 49.9 131.5 ― ― ― ―
l― ― ―
1680
 
x
 
1050 1
 
680
 
x
 
1
 
050 65.3 60.0 146.3 ― ― ― ―
l― ― ―
1
 
680
 
x
 
1
 
050 54.1 50.0 119.5 ― ― ― ―
l― ― ―
1920
 
x
 
1080 1
 
920
 
x
 
1
 
080 55.6 49.9 141.5 ― ― ― ―
l― ― ―
1
 
920
 
x
 
1
 
080
*266.6 59.9 138.5 ― ― ― ―
l― ― ―
1920
 
x
 
1200 1
 
920
 
x
 
1
 
200 61.8 49.9 158.3 ― ― ― ―
l― ― ―
1
 
920
 
x
 
1
 
200
*274.0 60.0 154.0 ― ― ― ―
l―
l―
*1 Supports half.
*2  VESA  CVT RB (Reduced Blanking) compliant
3D compatible 
signal Resolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) RGB1/RGB2 SDI1/SDI2H-DR1-2S1-2Horizontal
(kHz)Vertical(Hz)SBS*1TBLBLFSSBS*1TBLBL3G
720/60p 1
 
280
 
x
 
720 45.0 60.0 74.3
l l l―
l l l l l l l
720/50p 1
 
280
 
x
 
720 37.5 50.0 74.3
l l l―
l l l l l l l
1080/60i 1
 
920
 
x
 
1
 
080i 33.8 60.0 74.3
l l― ―
l l―
l l l l
1080/50i 1
 
920
 
x
 
1
 
080i 28.1 50.0 74.3
l l― ―
l l―
l l l l
1080/24p 1
 
920
 
x
 
1
 
080 27.0 24.0 74.3
l l― ―
l l―
l l l l
1080/24sF 1
 
920
 
x
 
1
 
080i 27.0 24.0 74.3
l l― ―
l l―
l l l l
1080/25p 1
 
920
 
x
 
1
 
080 28.1 25.0 74.3
l l― ―
l l―
l l l l
1080/30p 1
 
920
 
x
 
1
 
080 33.8 30.0 74.3
l l― ―
l l―
l l l l
1080/60p 1
 
920
 
x
 
1
 
080 67.5 60.0 148.5
l l― ―
l l― ―
l l l
1080/50p 1
 
920
 
x
 
1
 
080 56.3 50.0 148.5
l l― ―
l l― ―
l l l
640
 
x
 
480 640
 
x
 
480 31.5 59.9 25.2
l― ― ― ― ― ― ― ― ― ―
800
 
x
 
600 800
 
x
 
600 37.9 60.3 40.0
l― ― ― ― ― ― ― ― ― ―
1024 x 768 1
 
024
 
x
 
768 39.6 50.0 51.9
l― ― ― ― ― ― ― ― ― ―
1
 
024
 
x
 
768 48.4 60.0 65.0
l― ― ― ― ― ― ― ― ― ―
1
 
024
 
x
 
768 81.4 100.0 113.3 ― ― ―
l― ― ― ― ― ― ―
1
 
024
 
x
 
768 98.8 120.0 139.1 ― ― ―
l― ― ― ― ― ― ―
1152
 
x
 
864 1
 
152
 
x
 
864 53.7 60.0 81.6
l― ― ― ― ― ― ― ― ― ―
1280
 
x
 
720 1
 
280
 
x
 
720 37.1 49.8 60.5
l― ― ― ― ― ― ― ― ― ―
1
 
280
 
x
 
720 44.8 59.9 74.5
l― ― ― ― ― ― ― ― ― ―
1
 
280
 
x
 
720 76.3 100.0 131.8 ― ― ―
l― ― ― ― ― ― ―
1
 
280
 
x
 
720 92.6 120.0 161.6 ― ― ―
l― ― ― ― ― ― ―
1280
 
x
 
768 1
 
280
 
x
 
768 39.6 49.9 65.3
l― ― ― ― ― ― ― ― ― ―
1
 
280
 
x
 
768 47.8 59.9 79.5
l― ― ― ― ― ― ― ― ― ―
1
 
280
 
x
 
768
*247.4 60.0 68.3 l― ― ― ― ― ― ― ― ― ―
1280
 
x
 
800 1
 
280
 
x
 
800 41.3 50.0 68.0
l― ― ― ― ― ― ― ― ― ―
1
 
280
 
x
 
800 49.7 59.8 83.5
l― ― ― ― ― ― ― ― ― ―
1
 
280
 
x
 
800
*249.3 59.9 71.0 l― ― ― ― ― ― ― ― ― ―
1280
 
x
 
960 1
 
280
 
x
 
960 60.0 60.0 108.0
l― ― ― ― ― ― ― ― ― ―
1280
 
x
 
1024 1
 
280
 
x
 
1
 
024 52.4 50.0 88.0
l― ― ― ― ― ― ― ― ― ―
1
 
280
 
x
 
1
 
024 64.0 60.0 108.0
l― ― ― ― ― ― ― ― ― ―
1366
 
x
 
768 1
 
366
 
x
 
768 47.7 59.8 85.5
l― ― ― ― ― ― ― ― ― ―
1
 
366
 
x
 
768 39.6 49.9 69.0
l― ― ― ― ― ― ― ― ― ―
1400 x 1050 1
 
400
 
x
 
1
 
050 54.1 50.0 99.9
l― ― ― ― ― ― ―
l l―
1
 
400
 
x
 
1
 
050 64.0 60.0 108.0
l― ― ― ― ― ― ―
l l―
1
 
400
 
x
 
1
 
050 65.2 60.0 122.6
l― ― ― ― ― ― ―
l l―
1
 
400
 
x
 
1
 
050 65.3 60.0 121.8
l― ― ― ― ― ― ―
l l―
1440
 
x
 
900 1
 
440
 
x
 
900 55.9 59.9 106.5
l― ― ― ― ― ― ― ― ― ―
1
 
440
 
x
 
900 46.3 49.9 86.8
l― ― ― ― ― ― ― ― ― ―  
						

							Chapter 6 Appendix — Technical information
214 - ENGLISH
3D compatible signal Resolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) RGB1/RGB2 SDI1/SDI2H-DR1-2S1-2Horizontal
(kHz)Vertical(Hz)SBS*1TBLBLFSSBS*1TBLBL3G
1600
 
x
 
900 1
 
600
 
x
 
900 46.4 49.9 96.5
l― ― ― ― ― ― ― ― ― ―
1
 
600
 
x
 
900 55.9 60.0 119.0
l― ― ― ― ― ― ― ― ― ―
1600
 
x
 
1200 1
 
600
 
x
 
1
 
200 75.0 60.0 162.0
l― ― ― ― ― ― ― ― ― ―
1
 
600
 
x
 
1
 
200 61.8 49.9 131.5
l― ― ― ― ― ― ― ― ― ―
1680
 
x
 
1050 1
 
680
 
x
 
1
 
050 65.3 60.0 146.3
l― ― ― ― ― ― ― ― ― ―
1
 
680
 
x
 
1
 
050 54.1 50.0 119.5
l― ― ― ― ― ― ― ― ― ―
1920
 
x
 
1080 1
 
920
 
x
 
1
 
080 55.6 49.9 141.5
l― ― ― ― ― ― ― ― ― ―
1
 
920
 
x
 
1
 
080
*266.6 59.9 138.5 l― ― ― ― ― ― ― ― ― ―
1920
 
x
 
1200 1
 
920
 
x
 
1
 
200 61.8 49.9 158.3
l― ― ― ― ― ― ―
l l―
1
 
920
 
x
 
1
 
200
*274.0 60.0 154.0 l―
l― ― ― ― ―
l l―
*1 Supports half.
*2  VESA  CVT RB (Reduced Blanking) compliant
Note
 fDIGITAL LINK input compatible signal is the same as HDMI input compatible signal.  
						

							Chapter 6 Appendix — Specifications
ENGLISH - 215
Specifications
The specifications of the projector are as follows.
Power supply200   V - 240   V ~ (200   V - 240   V alternating current), 50   Hz/60   Hz
Power consumption 2
  060   W (11.5  
A)
When [ST

ANDBY MODE] is set to [ECO]: 0.3   W
When [STANDBY MODE] is set to [NORMAL]: 4
  W
DLP chip Size
PT
-

DZ21K224.4
  mm (0.96") (aspect ratio 16:10)
PT
-

DS20K224.1
  mm (0.95") (aspect ratio 4:3)
PT
-

DW17K221.6
  mm (0.85") (aspect ratio 16:9)
PT
-

DZ16K224.1
  mm (0.95") (aspect ratio 16:9)
Display system DLP chip x 3, DLP projection system
Number of pixels PT
-

DZ21K22
  304   000 pixels (1   920   x   1   200 dots)
PT
-

DS20K21
  470   000 pixels (1   400   x   1   050 dots)
PT
-

DW17K21
  049   088 pixels (1   366   x   768 dots)
PT
-

DZ16K22
  073   600 pixels (1   920   x   1   080 dots)
Lens Optional
Luminous lamp 432
  W, UHM lamp x 4
Light output
*1
PT- DZ21K2, PT- DS20K2 20   000   lm (ANSI)
PT
-
 DW17K2 17
  000   lm (ANSI)
PT
-

DZ16K2 16
  000   lm (ANSI)
Contrast ratio
*110 000:1 (when [DYNAMIC IRIS] is set to [3])
Color system 7 standards (NTSC/NTSC4.43/P
AL/PAL - N/PAL - M/SECAM/PAL60)
Projected image size 1.78
  m (70") to 25.40   m (1   000")
*2
Image aspect ratio PT
-
 DZ21K2
16:10
PT- DS20K24:3
PT
-
 DW17K2, PT
-
 DZ16K216:9
Projection method [FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]
Power cord length 3.0
  m (118-1/8")
Outer case Molded plastic
Dimensions Width
620
  mm (24-13/32")
Height 255
  mm (10-1/32") (excluding the feet)
Depth 730
  mm (28-3/4") (excluding the lens mount cover)  
						

							Chapter 6 Appendix — Specifications
216 - ENGLISH
WeightApprox. 41.0   k] (90.3   lbs.)*3
Noise level*146 dB
Operating 
environment
Operating 
environment 
temperature
*40 °C (32 °F) to 45 °C (113 °F)
Operating 
environment 
humidity 10
  % to 80   % (no condensation)
Remote 
control Power supply
DC 3
  V (AA/R6/LR6 battery x 2)
Operating range Within approx. 30
  m (98'5") (when operated directly in front of signal receiver)
Weight 150
  ] (5.3   ozs.) (including batteries)
Dimensions Width: 47.5
  mm (1-7/8"), Height: 181.5   mm (7-5/32"), Depth: 27.5   mm (1-3/32")
*1 Measurement, measuring conditions and method of notation all comply with ISO21 1 18 international standards.
*2  When the zoom lens (Model No.: ET- D75LE8) is used, the projected image size for the maximum projection distance will be 1.78   m (70") to 15.24   m 
(600"). When the fixed-focus lens (Model No.: ET
-

D75LE90) is used, the projected image size for the maximum projection distance will be 3.05   m 
(120") to 15.24
  m (600").
*3
 
A
 verage value. Weight varies for each product.
*4
 
When using the projector at high altitudes (between 1
   400   m (4   593') and 2   700   m (8   858') above sea level), the operating environment temperature 
should be between 0
  °C (32   °F) and 40   °C (104   °F).
If you use the smoke cut filter, the operating environment temperature should be between 0
  °C (32   °F) and 35   °C (95   °F). However, it cannot be 
used at high altitudes.
If you use the Replacement lamp unit (for portrait mode), the operating environment temperature should be between 0
  °C (32   °F) and 40   °C 
(104
  °F) when using it at elevations lower than 1   400   m (4   593') above sea level, and should be between 0   °C (32   °F) and 35   °C (95   °F) when 
using it at high altitudes (between 1
  400   m (4   593') and 2   700   m (8   858') above sea level). If you use the Replacement lamp unit (for portrait mode) 
together with the smoke cut filter, the operating environment temperature should be between 0
  °C (32   °F) and 30   °C (86   °F). (Only for PT
-
 DZ21K2, 
PT
-

DS20K2, PT
-
 DW17K2)  
						

							Chapter 6 Appendix — Specifications
ENGLISH - 217
 rApplicable scanning frequency
Refer to “List of compatible signals” ( x   page   209) for the types of video signals that can be used with the 
projector.
For video signal, Y/C signal Horizontal: 15.73   kHz, Vertical: 59.94   Hz; Horizontal: 15.63   kHz, Vertical: 50   Hz
For RGB signal Horizontal: 15
  kHz to 100   kHz, Vertical: 24   Hz to 120   Hz
PIAS (Panasonic Intelligent Auto Scanning) system
 f Dot clock frequency: 162

  MHz or less
For YC
BCR/YPBPR signal
 f 525i (480i)
Horizontal: 15.73
   kHz, Vertical: 59.94   Hz
 f
525p (480p)
Horizontal: 31.47
   kHz, Vertical: 59.94   Hz
 f
750 (720)/60p
Horizontal: 45
   kHz, Vertical: 60   Hz
 f
1
 125 (1035)/60i
Horizontal: 33.75   kHz, Vertical: 60   Hz f
1 125 (1080)/50i
Horizontal: 28.13   kHz, Vertical: 50   Hz
 f1

125 (1080)/24sF
Horizontal: 27
  kHz, Vertical: 48   Hz
 f1

125 (1080)/30p
Horizontal: 33.75
  kHz, Vertical: 30   Hz
 f1

125 (1080)/50p
Horizontal: 56.25
  kHz, Vertical: 50   Hz
 f625i (576i)
Horizontal: 15.63
   kHz, Vertical: 50   Hz
 f
625p (576p)
Horizontal: 31.25
   kHz, Vertical: 50   Hz
 f
750 (720)/50p
Horizontal: 37.5
   kHz, Vertical: 50   Hz
 f
1
 125 (1080)/60i
Horizontal: 33.75   kHz, Vertical: 60   Hz f
1 125 (1080)/24p
Horizontal: 27   kHz, Vertical: 24   Hz
 f1

125 (1080)/25p
Horizontal: 28.13
  kHz, Vertical: 25   Hz
 f1

125 (1080)/60p
Horizontal: 67.5
  kHz, Vertical: 60   Hz
 fThe SYNC/HD and VD terminals do not support 3 value SYNC.
For DVI

-
D signal 525i (480i)
*1, 625i (576i)*1, 525p (480p), 625p (576p), 750 (720)/60p, 
 
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 f Displayable resolution: 640

  x   480 to 1   920   x   1   200 (non-interlaced)
 fDot clock frequency: 25

  MHz to 162   MHz
For HDMI signal 525i (480i)
*1, 625i (576i)*1, 525p (480p), 625p (576p), 750 (720)/60p, 
 
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 f Displayable resolution: 640

  x   480 to 1   920   x   1   200 (non-interlaced)
 fDot clock frequency: 25

  MHz to 162   MHz
For SDI signal (Only for 
PT
-

DZ21K2, PT
-

DS20K2, 
PT
-

DZ16K2) SD
-
SDI signal SMPTE ST 259 compliant
YC
BCR 4:2:2 10-bit
480i, 576i
Single link HD
-
SDI signal SMPTE ST 292 compliant
YP
BPR 4:2:2 10-bit
720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 
1080/24p, 1080/24sF
, 1080/30p
Dual link HD
-
SDI signal
*2SMPTE ST 372 compliant
RGB 4:4:4 12 - bit/10 - bit
1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 
2048
  x   1080/24p, 2048   x   1080/24sF
X'Y'Z' 4:4:4 12
- bit
2048
  x   1080/24p, 2048   x   1080/24sF
3G
-
SDI signal SMPTE ST 424 compliant
YP
BPR 4:2:2 10-bit
1080/50p, 1080/60p
RGB 4:4:4 12
- bit/10 - bit
1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
Dual link 3G
-
SDI signal
*2SMPTE ST 425 compliant
YP
BPR 4:4:4 12-bit/10-bit
1080/60p, 1080/50p, 2048   x   1080/60p, 2048   x   1080/50p, 
2048
 
x   1080/48p
RGB 4:4:4 12
- bit/10 - bit
1080/60p, 1080/50p, 2048
  x   1080/60p, 2048   x   1080/50p, 
2048
 
x   1080/48p
*1 Pixel-Repetition signal (dot clock frequency 27.0   MHz) only
*2  Only for PT- DZ21K2, PT- DS20K2
Note
 fDIGITAL LINK input compatible signal is the same as HDMI input compatible signal.  
						

							Chapter 6 Appendix — Specifications
218 - ENGLISH
 rTerminal
 terminal 1 set (BNC x 5 (RGB/YP
BPR/YCBCR/YC/VIDEO x 1))
RGB signal 0.7
 
V [p-p] 75   Ω (SYNC ON GREEN: 1.0   V [p-p] 75   Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
Y/C signal Y
: 1.0
 
V [p-p], C: 0.286
 
V [p-p] 75
 
Ω
VIDEO signal 1.0
 
V [p-p] 75
 
Ω
 terminal 1 set, high-density D
-
Sub 15
 
p (female)
RGB signal 0.7
 
V [p-p] 75
 
Ω (SYNC ON GREEN: 1.0
 
V [p-p] 75
 
Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
 terminal 1 set, DVI
-
D 24
 
p, single link, DVI 1.0 compliant, HDCP compatible
 terminal 1 set, HDMI 19
 
p, HDCP compatible, Deep Color compatible
 terminal (Only for 
PT
-

DZ21K2, PT
-

DS20K2)
 terminal (Only for 
PT
-

DZ16K2) 1 set (BNC)
SD
-
SDI signal SMPTE ST 259 compliant
HD
-
SDI signal SMPTE ST 292 compliant
3G
-
SDI signal SMPTE ST 424 compliant
Dual link HD
-
SDI 
(LINK
-
A) signal
*1SMPTE ST 372 compliant
Dual link 3G
-
SDI (Link 
1) signal
*1SMPTE ST 425 compliant
 terminal
(Only for PT
-

DZ21K2, 
PT
-

DS20K2) 1 set (BNC)
SD
-
SDI signal SMPTE ST 259 compliant
HD
-
SDI signal SMPTE ST 292 compliant
3G
-
SDI signal SMPTE ST 424 compliant
Dual link HD
-
SDI 
(LINK
-
B) signal SMPTE ST 372 compliant
Dual link 3G
-
SDI (Link 
2) signal SMPTE ST 425 compliant
 terminal
(Only for PT
-

DZ21K2, 
PT
-

DS20K2) 1 set (BNC)
During input setting
TTL high impedance
During output setting TTL output: Maximum 10
  mA
 terminal
(Only for PT
-

DZ21K2, 
PT
-

DS20K2) 1 set (BNC)
TTL output: Maximum 10
 
mA
/  
terminal D
-
Sub 9
 
p, 1 set each, RS
- 232C compliant, for computer control
/  terminal M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
 terminal 1 set, D
-
Sub 9
 
p, for contact control
 terminal 1 set, RJ
-
45, for network and DIGITAL LINK connections, PJLink compatible, 100Base - TX, Art-Net 
compatible
*1 Only for PT- DZ21K2, PT- DS20K2
Note
 fThe model numbers of accessories and optional accessories are subject to\
 change without prior notice.  
						

							Chapter 6 Appendix — Dimensions
ENGLISH - 219
Dimensions
Unit: mm
244 (9-19/32)310 (12-7/32)
620 (24-13/32) 608 (23-15/16)
488 (19-7/32)
36 (1-13/32)
177 (6-31/32)
291 (11-15/32) 70 (2-3/4)
730 (28-3/4)
* Actual dimensions may dif
fer depending on the product.  
						

							Chapter 6 Appendix — Precautions for attaching the ceiling mount bracket
220 - ENGLISH
Precautions for attaching the ceiling mount bracket
 fWhen installing the projector to a ceiling, be sure to use the specified optional Ceiling mount bracket (Model 
No.: ET
-

PKD520H (for high ceilings), ET
-
 PKD520S (for low ceilings), ET
-
 PKD520B (Projector Mount Bracket)). 
The Ceiling mount bracket (Model No.: ET
-

PKD520H (for high ceilings), ET
-
 PKD520S (for low ceilings)) is used 
in combination with the Ceiling mount bracket (Model No.: ET
-

PKD520B (Projector Mount Bracket)).
 fWhen installing the projector

, attach the drop-prevention set that comes with the ceiling mount brack\
et to 
the projector. If you need the drop-prevention set (hex bolt with washer (M10
  x   40), wire rope: TTRA0143) 
separately, consult your dealer.
 f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.
 fPanasonic takes no responsibility for any damage to the projector result\
ing from use of a ceiling mount bracket 
not manufactured by Panasonic or the inappropriate choice of location fo\
r installation, even if the warranty 
period of the projector has not expired.
 fUnused products must be removed promptly by a qualified technician.
 fReferring to the following screw holes for ceiling mount diagram, use screws of sufficient length to reach the 
embedded nuts.
 fUse a torque screwdriver or 

Allen torque wrench to tighten bolts to their specified tightening torques. Do not use 
electric screwdrivers or impact screwdrivers.
 f Read the Installation Instructions for the ceiling mount bracket for det\
ails.
 fThe model numbers of accessories and optional accessories are subject to\
 change without prior notice.
M6
M6
Bottom view
Model No. of Ceiling mount bracket: ET-PKD520H (for high ceilings)
ET-PKD520S (for low ceilings)
ET-PKD520B (Projector Mount Bracket)
Torque: (M6) 4 ± 0.5 N·m Screw holes for ceiling mount
Thread engagement depth
Max. screw hole depth
Max. screw hole depth Embedded nut (Thread engagement 
depth)Space
Unit: mm
25 (31/32)
30 (1-3/16)
12 (15/32)
12 (15/32)
30 (1-3/16)