Panasonic Dbs 824 Instructions Manual

Trunk-to-Trunk TransferKey Telephone Features4Press the ON/OFF key
“Set Sta Lock” disappears from the display
Related Programming
.
Considerations
.
.
.
.FF3 (Extensions) Extension Lockout Code
A locked extension can be used for Intercom Calls
Station Lockout key codes can only be set from an attendant phone or a
key phone
You cannot confirm Speed Dialing or set Speed Dialing while Station
Lockout is activated
If you enter an incorrect key code and then try to dial, the phone will issue
a busy tone...

Key Telephone FeaturesTrunk-to-Trunk Transferl“Talk #XX” [where “XX” is the selected line number) appears on the
display
3Dial the telephone number of the party you want to connect to your
original call
4After the call goes through, press the CONF key
l A three-party Conference Call is initiated
l “Conf #XX 
#YY” (where “XX” is the first line and “YY” the second
Iine) appears on the display
5Press one of the CO keys
l The two outside lines are connected
l “Hold #XX 
#YY” (where “XX” is the first line and...

Chapter 4. DSLT FeaturesThis chapter describes features that are available with the Digital Single
Telephone (DSLT)This chapter covers the following topics
IPage
1 DSLT
I 4-3 I
1 Absence MessageI4-3IBusy Override
4-51
1 Call ForwardingI4-6I
Call Hold4-9Call Park
4-10Call Pickup
4-12Call Transfer
4-14call waiting
4-16Camp-on
4-18
1 Conference Calls1 4-20 1
1 Dial “0” for Attendant
I Direct Trunk Access
I Do-Not-Disturb @ND)
1 4-21 1
1 4-21 I
1 4-22 1
I Intercom Calling1 4-23 1
ILast Number...

DBS 824-10-700
Issued 3/l/95 

DSLT FeaturesDSLT
DSLT
Figure 4-l illustrates the DSLT For more information on DSLT operation, see
the Digital SLT User s Guide (Section 790)
Figure 4-1 Digital Single Line Telephone (DSLT)
Absence Message(CPC-S and CPC-M)
Description
DSLT users can leave text messages on their phones when they are away
When the unattended extension is called by a display phone, the text message
appears on the caller’s phoneOne of the following messages can be selected Messages 5 to 9 can be
changed through system...

Absence MessageDSLT Features6User Defined
7User Defined
8User Defined
9User Defined
Operation
To Set an Absence Message
1Lift the handset or press ON/OFF
2 Dial “71 
”
3Enter a message code between 0 and 9 (See Table 4-l)
4Enter the time you will return (optional) See Table 4-2 for examples
5Replace the handset or press ON/OFF
To Cancel an Absence Message
1Lift the handset or press ON/OFF
2 Dial “71 
”
3Replace the handset or press ON/OFF
Related Programmingl
FFl (System) Extension Class of Service...

DSLT FeaturesBusy Override
Table 4-2Example Return Times for Absence Messages
1 Return900 1
I 111 Return1100 1
1 6151 Return 6 15 I
1035
I
1 Return 10 35
Four-digit numbers can also be entered (0000-9999 = Hours 
& Minutes or
Month 
& Date)
DND and Absence Messages cancel Call Forwarding Calls to an extension
with DND or Absence Message turned on are treated differently, depending
on whether they are trunk or intercom calls Intercom calls receive busy
tone, trunk calls are routed to the extension defined...

Call ForwardingDSLT Features
Related Programming
lFFl (System) Alert Tone for Busy Override and OHVA
l 
FFl (System) Extension Class of Service
l FF3 (Extension) Extension Class of Service Assignment
l FF3 (Extension) Busy Override Send
l FF3 (Extension) Busy Override Receive
l FF3 (Extension) Page Group (O-7) Extensions
Considerations
lYou cannot break in on three-party conference calls
lThe default for the override alert tone is “off” If the override alert tone is
enabled, the tone is sent to both...

DSLT FeaturesCall Forwardi na
Call Forwarding-No Answer When this feature is activated, unansweredcalls ring until the Call Forward No Answer timer expires When the timer
expires, the unanswered calls are forwarded
Call Forwarding--Busy When this feature is activated, all incoming callsto a busy extension are forwarded
Call Forwarding--Busy/No Answer When this feature is activated, allincoming calls to an extension that is busy or does not answer are forwarded
Permanent Call Forwarding Permanent call...

Call ForwardingDSLT FeaturesNote: Outside nurnbers used for call forwarding must already beprogrammed into speed dialing (See page 4-32 for instructions 
)
5Replace the handset or press ON/OFF
To cancel Call Forwarding
1Lift the handset or press ON/OFF2 Dial “72 
”
3Replace the handset or press ON/OFF
Related Programmingl
FFl (System) Call Forward -- No Answer Timer
l 
FFl (System) Extension Class of Service
l FF3 (Extension) Extension Class of Service Assignment
l FF3 (Extension) Permanent Call Forward...