Panasonic Dbs 824 Instructions Manual

SLT FeaturesCall Transfer.
Considerations
.
.
.
.
FE1 (System) Extension Transfer Recall Xmer for Intercom Calls
In order for users to transfer calls by flashing the switchhook, dialing the
extension, and going 
onhook, the Onhook Transfer feature must be
enabled
You cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated
You can transfer a call to an extension that has Call Forwarding activated
The transferred call will follow the call forwarding path of the extension...

Call TransferSLT Features
To use Screened Transfer when Onhook Transfer is disabled
1Flash the switchhook to place the outside call on hold
The phone issues intercom dial tone
2Dial the extension number to which the call is to be transferred
3When your call is answered, inform the third party of the transfer
The EXT LED stops flashing and remains lit
4 Dial “8 
”The third party need only pick up the handset to speak to the outside line
5Replace the handset.
Related Programmingl 
FFl (System) Onhook...

SLT FeaturesCall Waiting
Call Waiting(CPC-S and CPC-M)
Description
You can send a Call Waiting signal, followed by a brief LCD message, to a
busy extension The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to your
extensionThe following messages can be sent using the Call Waiting feature
Table 5-4Call Waiting Text Messages
MessageMessage
Code
5“Visitor Here”
6“Need Help”
7“Important”
9“Emergency”
Message codes O-4 are not available...

Call WaitingSLT FeaturesTo answer Call Waiting (and disconnect the current call)
1Replace the handset
The current call is disconnected
2Pick up the handset.You are automatically be connected to the extension sending the Call
Waiting
To answer Call Waiting (without disconnecting the current call)1 Flash the switchhook
l The current call is disconnected
l The new call is connected automatically
2Flash the switchhook again to retrieve the original call
Related Programmingl
FFl (System) Extension Class of...

SLT FeaturesCamp-on
Camp-on(CPC-S and CPC-M)
DescriptionIf you reach a busy extension, you can use the Camp-on feature to alert you
with a ring when the extension becomes free You can then pick up your
handset to automatically dial the extension
Operation
To activate the Camp-on feature
1Lift the handset
2Dial the desired extension number
3Upon hearing busy tone, press “3 ”l The phone issues 
ringback tone
lIf the Camp-on feature is not available, the phone continues to issue a
busy tone
4Replace the...

Conference CallsSLT Features
lCamp-on cannot be activated to an extension that has call forwarding
turned on
*If an extension with call forwarding camps on to a busy extension, its
camp-on reply is not forwarded
lAn extension can only have one call camped on at a time For example, if
Extension 152 camps on to Extension 153, another extension cannot camp
on to 153, as long as 152 is camped on
lAn extension that has initiated a camp-on cannot receive a camp-on For
instance, if Extension 200 has camped on...

SLT FeaturesDial 0 for AttendantTo add an outside number
1Flash the switchhook to place the current call on hold
2Dial a trunk group number (81-86 or 9)
3Dial the outside number
4Flash the switchhook when your call is answered
Related Programmingl FF3 (Extension) Single Line Telephone Hookflash
ConsiderationslCall Waiting responses cannot be made during conference calls
lA switchhook flash is ignored during a conference call
lCalls forwarded externally cannot create a conference
lThe Hold feature cannot...

DTMF StationsSLT Features
l FFl (System)Second Attendant Position
* FFl (System)Third Attendant Positionl 
FFl (System)Fourth Attendant Position
l 
FFl (System)Attendant Transfer Extension
DTMF Stations(CPC-S and CPC-M)
DescriptionThe DBS 824 supports DTMF extensions on SLTA analog extension ports
Dial Pulse extensions are not supported by the SLTA
Related Programmingl FF2 (Trunk) 
DTMF/Pulse Dialing for Trunks
Considerations
*DP to DTMF Signal Conversion allows DTMF extensions to use either
dial pulse...

SLT FeaturesDo-Not-Disturb (DND)3Dial the outside number
4Replace the handset.
Do-Not-Disturb (DND)
(CPC-S and CPC-M)
Description
An extension can be made unavailable by activating Do-Not-Disturb @ND)
When DND is activated at an extension calls to that extension receive busy
tone
Operation
To activate DND
1Lift the handset.2 Dial “73 
”
3Replace the handset.
To cancel DND
1Lift the handset.2 Dial “73 
”
3Replace the handset.
Related Programming
l FFl (System) Extension Class of Service
l F’F3 (Extension)...

intercom CallingSLT Features
lDND and Absence Messages cancel Call Forwarding
Calls to an extension with DND or Absence Message turned on are treated
differently, depending on whether they are trunk or intercom calls
Intercom calls receive busy tonetrunk calls are routed to the extension
defined in permanent call forwarding
The following types of incoming trunk calls will follow permanent call
forward settings
- Direct trunk calls
- Transferred trunk calls
lThe DND feature cannot be activated at an...