Panasonic Dbs 824 Instructions Manual

DSLT FeaturesCall Hold- Transferred trunk calls
lVoice calls do not forward when Call Forwarding--No Answer is used
lTo forward to an external number, the number must first be pre-
programmed in personal or system speed dialing Forwarding to an outside
number requires the use of pooled trunks (9, 8 l-86) However, dial “9”
trunk access is not available for use when Least Cost Routing is active
lExtensions for which Call Forwarding to an external number has been set
cannot
-Be in the middle of an outside...

Call ParkDSLT Features
Related Programmingl 
FFl (System) Non-appearing Central Office Line Hold
lFFl (System) Recall Timer for Extension-Held Intercom Calls
lFFl (System) Recall Timer for Extension-Held CO Calls
lFFl (System) Trunk Line Automatic Hold (Key Bank Hold)
Considerations
lA held call will recall if it is not retrieved before the Hold Recall Timer
expires
lLf there is no response to the Hold Recall tone, the tone is issued at the
Attendant Phone However, no tone is issued at the Attendant...

DSLT FeaturesCall ParkOperation
To park a call
1Press the HOLD key2 Dial “75 
”
To retrieve a parked call
1Lift the handset
The phone issues intercom dial tone
2 Dial “76 
”
3Dial the number of the extension that parked the call
Related Programming
lFFl (System) Attendant Park Hold Recall Timer
l 
FFl (System) Extension Park Hold Recall Timer
Considerations
lAn alarm tone is issued if a parked call is not released before the Park
Recall Timer expires If this happens, the user that parked the call can...

Call PickupDSLT FeaturesCall Pickup(CPC-S and CPC-M)
DSLTs can use both directed and group call pickup
Direct Call Pickup
DescriptionA call to an extension can be answered from any other extension with the
Direct Call Pickup feature
Operation
1Lift the handset
2 Dial “79 
”
3Enter the number of the ringing extension
Related Programmingl 
FFl (System) Extension Class of Service Setting
l FF3 (Extension) Extension Class of Service Assignment
Considerations
lIf more than one caller is attempting to reach...

DSLT FeaturesGroup Call PickupCall Pickup
DescriptionUse the Group Call Pickup feature, to answer calls to other extensions within
your Paging Group (01-07) without entering the number of the extension that
is ringing
Operation
1Lift the handset
2 Did “70 
”
Related Programmingl 
FFl (System) Extension Class of Service Setting
lFF3 (Extension) Extension Class of Service Assignment
l FF3 (Extension) Extension Page Group
Considerations
lIf more than one call is arriving at the Paging Group, the Group Call...

Call TransferDSLT featuresCall Transfer(CPC-S and CPC-M)
The DBS 824 provides two call transfer methods blind transfer and screened
transfer
Blind Transfer
DescriptionBlind transfer allows the transfer of a call directly to an extension, without
waiting for the called extension to answer
Operation
1Press the HOLD key to place the call on hold
2Dial the extension number to which the call is to be transferred
3Replace the handset before the other party answers
lYou can also replace the handset after the...

DSLT FeaturesCall Transfer
lYou can transfer a call to an extension that has Call Forwarding activated
The transferred call will follow the call forwarding path of the extension it
is transferred toFor example, if extension “A” is forwarded to extension 
“B,” calls that are
transferred to extension “A” will be forwarded to extension “B 
”lWhen you transfer a call to an extension that does not answer and does not
have Call Forwarding activated, the transfer recalls your extension after
the Transfer Recall...

Call WaitingDSLT Features4 Dial “8 
”The third party need only pick up the handset to speak to the outside line
5Replace the handset.
Related Programmingl 
FFl (System) Onhook (Automatic) Transfer
lFFl (System) Recall Timer for Extension -Transferred CO Calls
lFFl (System) Recall Timer for Extension -Transferred CO Calls
Considerations
lYou cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated
lYou can transfer a call to an extension that has Call Forwarding...

DSLT FeaturesCall Waiting
Table 4-4Call Waiting Text Messages
MessageMessage
Code
5“Visitor Here”
6“Need Help”
7“Important”
9“Emergency”
Message codes O-4 cannot be used
Operation
To Set Call Waiting
1Lift the handset
2Dial the extension number
3Upon hearing busy tone, press “3 ”
4If you wish to send a text message, dial the desired message code (5-7 or
9)The message appears on the called party’s phone if the called party has a
display phone
(If the extension does not have a display, it will continue...

Camp-onDSLT Features
l The new call is connected automatically2Press HOLD again to retrieve the first call
Related Programming
l
FFl (System) Extension Class of Service Setting
l FF3 (Extension) Extension Class of Service Assignment
l FF3 (Extension) Call 
Waiting/OHVAConsiderations
l
Call Waiting can be used without entering a message code
lAn extension that has DND activated, has a call on hold, is ringing (from
another call), or is engaged in a conference call cannot receive Call
Waiting messages
lAn...