Panasonic Dbs 824 Instructions Manual

DSLT FeaturesOnhook Dialing
lYou cannot toggle back and forth between two calls during an OHVA
Onhook Dialing(CPC-S and CPC-M)
Description
To use onhook dialing, press the ON/OFF keyThe DSLT does not have a microphone, so the user must lift the handset to
talk
Pooled Trunk Access(CPC-S and CPC-M)
DescriptionThe DBS 824 system is designed to accept from 4 to 8 outside lines These
lines can be divided into seven Pooled Trunk groups The groups are
numbered 9 and 81-86To select a free outside line, choose a...

Reminder CallDSLT Featuresl FF3 (Extension) Forced Least Cost Routing
l 
FF8 (LCR) LCR Settings (all)
Considerations
lThere are seven groups of outside lines 9 and 8 l-86 Some additional
outside lines may not be assigned to a group
lDialing “9” activates LCR if the LCR option is enabled
Reminder Call(CPC-S and CPC-M)
DescriptionWith the Reminder Call feature, your telephone can act as an alarm clock
Operation
To Set the Reminder Call feature
1Lift the handset or press ON/OFFThe phone issues intercom dial...

DSLT FeaturesSaved Number RedialConsiderations
lA sixteen-second alarm tone will be issued at the specified time
lOne Reminder Call may be set for each telephone
lTo change the Reminder Call, enter a new time
lIf the extension is in use when the reminder call is scheduled, the reminder
call is sent as soon as the extension becomes available
Saved Number Redial(CPC-S and CPC-M)
DescriptionYou can save a previously dialed number for later redialing Unlike the Last
Number Redial feature, the Saved Number...

Speed DialingDSLT FeatureslAny previously saved number is erased when a new number is saved
lThe Saved Number Redial feature can redial a number up to sixteen digits
long
lA maximum of five Speed Dialing codes can be stored
Speed Dialing(CPC-S and CPC-M)
Personal Speed Dialing
DescriptionFrequently called numbers can be stored using the Personal Speed Dial
feature With the CPC-S and CPC-M in the standard mode, up to 10 Personal
Speed Dial numbers can be programmed at individual extensions With the
CPC-M...

DSLT FeaturesSpeed Dialing
6 Press HOLD7Replace the handset or press ON/OFF
To delete a Personal Speed Dial number
1Lift the handset or press ON/OFF
2 Press 
*3 Dial “80 
”
4Dial the personal speed dial number (90-99 or 900-939)
5 Press HOLD
6Replace the handset or press ON/OFF
Related Programmingl FF7 (Toll Restrictions) Toll Restrictions (all)
l 
FFlO (Speed Dialing) Personal Speed Dial Numbers
Considerations
lPersonal speed dial numbers for DSLTs can also be entered from an
attendant phone
lPersonal...

Speed DialingDSLT Features
Operation
To dial a system speed dial number
1Pick up the handset.
2If necessary, access an outside line
3 Press AUTO
4Dial the system speed dial code (00-89 or 000-199)
Related Programming
l 
FFl (System) Override Toll Restriction with SSD Numbers
l 
FFlO (Speed Dialing) System Speed Dialing
4-34
DBS 824- 1 O-700Issued 3/l /95 

Chapter 5. SLT FeaturesThis chapter describes features that are available with single-line telephones
(SLTs)Single-line telephones are industry-standard 2500 sets (touch tone required)
SLTs are not equipped with feature keys or line keys, so basic telephone
operations are performed by pressing 
dialpad keys and/or using the
switchhookThis chapter covers the following topics
1 Page 1Absence Message
5-3Busy Override
5-6Call Forwarding
Call Hold
5-7
5-10Call ParkI
5-11
Call Pickup5-12Call Transfer
5-14
1...

5-2DBS 824-10-700Issued 3/l/95 

SLT FeaturesAbsence MessageAbsence Message
(CPC-S and CPC-M)
DescriptionSLT users can leave text messages on their phones when they are away
When the unattended extension is dialed by a key phone, the text message
appears on the caller’s phone
One of the following messages can be selected Messages 5 to 9 can be
changed through system programming
Table 5-lAbsence Messages
Message
No
Message Text
01 InMeeting 1
3IVacationI
4( Another Office 1
51 User Defined I
8I User Defined I
91 User Defined 1
Operation...

Absence MessageSLT Features
To Cancel an Absence Message1Lift the handset2 Dial “71 
”
3Replace the handset
Related Programmingl 
FFl (System) Extension Class of Service
lFF3 (Extension) Extension Class of Service Assignment
l FF6 (Names and Messages) Absence Messages
Considerations
lExtensions without displays get a busy signal, rather than the Absence
Message
lIf a message code number that has not been assigned a text message is
selected, “Absence,” followed by the code number, appears on the caller’s...