Panasonic Dbs 824 Instructions Manual

SLT FeaturesAuto Redial
settings
- Direct trunk calls
- Transferred trunk calls
Auto Redial(CPC-S and CPC-M)
DescriptionIf the Redial key is pressed when the extension is idle or receiving dial tone,
the last intercom or outside number is automatically redialed
Related Programming
* FF3 (System) Auto-Redial on Extensions
l 
FFl (System) Extension Class of Service Setting
l FF3 (Extension) Extension Class of Service Assignment
Auto-Repeat Dial(CPC-S and CPC-M)
DescriptionWhen a called outside party is...

Busy OverrideSLT Featuresl 
FFl (System) Dial Tone Detection Timer
l FF2 (Trunk) CO Busy Tone Detection
Busy Override
(CPC-S and CPC-M)
DescriptionExtensions in the same Paging Group (l-7) can break into one another’s
outside calls or intercom calls to relay information or to create three-party
Conference Calls
OperationPress 
“4” when you hear the busy tone
An alert tone is issued at both phones
Related Programming
lFFl (System) Alert Tone for Busy Override & OWAl 
FFl (System) Extension Class of...

Call Forwarding
(CPC-S and CPC-M)
Call Forwarding allows users to send their calls to another extension, to an
outside line, or to voice mail The following table shows the call forwarding
features available
Table 5-3JIBS Call Forwarding features
Feature
Call Forwarding--All Calls
Call Forwarding--No Answer
Call Forwarding--Busy
Call Forwarding--Busy/No Answer
Permanent Call Forwarding
Call Forwarding--All Calls When this feature is activated, all incoming
calls to an extension are forwarded immediately...

Call ForwardingSLT FeaturesOperation
To activate Call Forwarding
1Lift the handset.
The phone issues intercom dial tone2 Dial “72 
”
3Dial the appropriate call forwarding code
4If you’re forwarding to an extension, enter the number of the extension
you want to receive your calls If you’re forwarding to an outside number,
dial 
“0” plus the appropriate speed dial number
Note: To forward to an outside number, you must have already
programmed the number into personal or system speed dialing You can
forward...

SLT FeaturesCall Forwarding
l FF3 (Extension) Extension Class of Service Assignment
l FF3 (Extension) Permanent Call Forward Type
l FF3 (Extension) Permanent Call Forward Extension
l FFlO (Speed Dialing) System Speed Dial Numbers
l 
FFlO (Speed Dialing) Personal Speed Dial Numbers
ConsiderationslCalls can be forwarded to extensions that have call forwarding activated
For example, phone “A” can be forwarded to phone “B,” even if phone
“B” is forwarded to voice mail
lExtensions receiving forwarded trunk...

Call HoldSLT Featuresforwarding will not work for any extension that is permanently call
forwarded to the hunt group pilot number
Call Hold(CPC-S and CPC-M)
Des&p tionCall Hold provides either exclusive or system hold, depending on system
programming With Exclusive Hold, only the extension that held the call can
retrieve it With System Hold, another extension can retrieve the call
Operation
To place a call on HoldFlash the switchhook
To release the callFlash the switchhook again
Related Programmingl 
FFl...

SLT FeaturesCall Park
lIf your system is set to onhook transfer, and you have placed an outside
call on hold and then made an intercom call, make sure the other extension
hangs up before you do 
Lf you hang up before the other extension, the held
outside line will be transferred to that extension
lThe DBS 824 can provide Music-on-Hold to callers placed on hold See
“Music-On-Hold” (page l-24) for more information
Call Park(CPC-S and CPC-M)
DescriptionUse the Call Park function to transfer an outside call...

Call PickupSLT Features
Considerations
lThe parked call recalls if it is not retrieved before the Recall Timer expiresIf this happens, the user that parked the call can retrieve it by picking up
the handset. If no one retrieves the call after the Park Recall Timer expires,
the call reverts to the attendant
lYou cannot park more than one outside line at a time
lThe Park Recall Timer is similar to the Recall Timer, except that when the
Park Recall Timer is set for “0” calls are automatically recalled in...

SLT FeaturesCall PickupConsiderations
lIf more than one caller is attempting to reach the ringing extension, the
Direct Call Pickup feature will answer the call that arrives first
Once the call has been picked up, other extensions that attempt to pick up
the call receive busy tone
lYou can answer incoming calls, intercom calls (both tone and voice), call
waiting, paging, transferred calls, or recalls using the Direct Call Pickup
feature You cannot answer camp-on callbacks with this feature
Group Call...

Call TransferSLT Features
lYou can answer incoming calls, Intercom Tone Calling, or Intercom Voice
Calling using the Group Call Pickup feature You cannot answer Paging or
Callback with this feature
lGroup Call Pickup cannot be used to pick up a ringing phone in Paging
Group 00 For example, if an extension is a member of Paging Groups 00
and 06, the extension can use Group Call Pickup to answer ringing calls inGroup 06, but not in Group 00
Call Transfer(CPC-S and CPC-M)
The DBS 824 provides two call...