Panasonic Dbs 824 Instructions Manual

Reminder CallKey Telephone FeaturesConsiderations
lCalls to Private Lines cause extensions to ring even if the DND or the
Absence Message feature is activated for them
lCalls to Private Lines are not forwarded, even if Call Forwarding is
activated on the associated extensions
lNo warning tone sounds at the Attendant Phone, no matter how long a call
on a Private Line is on hold, even if the overtime warning tone is ignored
lWhen a private line is assigned to an extension, the Toll Restriction
assignment...

Key Telephone FeaturesRinging Line Preferencel “Alarm Xx xx” (where “XX XX” is the time) appears on the display
along with an am /p m indicator
To cancel the Reminder Call feature
1Press the ON/OFF key
l The phone issues intercom dial tone
l The ON/OFF LED lights2 
DialY4”
“Enter Time HHMM” appears on the display
3Press the ON/OFF key
l The ON/OFF LED goes off
l The time disappears from the bottom line of the display
Considerations
lA sixteen-second alarm tone will be issued at the specified time
lOne...

Saved Number RedialKey Telephone FeaturesSaved Number Redial(CPC-S and CPC-M)
DescriptionYou can save a previously dialed number for later redialing Unlike the Last
Number Redial feature, the Saved Number Redial feature allows you to redial
the stored number even if it was not the last number dialed
Saved Number Redial works for outside numbers, but not for extension
numbers
Operation
To save a number
1Press the AUTO key twice before replacing the handset
2 Press 
“* ”“Dial Stored” will appear on the...

Key Telephone FeaturesSpeed Dialing
Considerations
lAny previously saved number is erased when a new number is saved
lThe Saved Number Redial feature can store a number up to sixteen digitslonglUp to five Speed Dialing codes can be stored and redialed
Speed Dialing(CPC-S and CPC-M)
Personal Speed DialingDescription
Extension users can store frequently called numbers using the Personal Speed
Dial feature With CPC-S and CPC-M in the standard mode, users can store
up to 10 Personal Speed Dial numbers at...

Speed DialingKey Telephone FeaturesIf you enter a trunk access code in the speed dial number, you do not haveto open a trunk before using the number
5Dial the number
6 Press HOLD
7 Press ON/OFF
To use a programmed Personal Speed Dial key
1If the Speed Dial key includes a trunk access code, simply press the key
If the Speed Dial key does not include an access code, press an unlit line
key before pressing the Speed Dial key
l The phone issues outside dial tone
l The line LED lights green
l“CO TALK #XX”...

Key Telephone FeaturesSpeed DialingTo assign a name to a Personal Speed Dial number
1Press the ON/OFF keyl The phone issues intercom dial tone
l The ON/OFF LED lights
2Press the PROG key3 Press 
“#I1 ”“Speed Dial Name” appears on the display
4Press the AUTO key
5Enter the Personal Speed Dial code
6Press AUTO to backspace and erase the existing name
7Use the dialpad sequences shown in Table 2-l on page 2-8 to enter letters
and/or numbers
l Press FLASH after each letterl Press CONF to switch between...

Speed DialingKey Telephone FeaturesConsiderationslPersonal Speed Dial numbers can contain up to sixteen characters,
including the
“*,” “#,” FLASH (indicate “-“), PAUSE (REDIAL),
CONF, 
and AUTO keyslA dash 
(,‘-“) can be displayed in the Personal Speed Dialing number To
display a dash, press the FLASH key where you want the dash to appear
lIf you make a mistake while programming, an alarm tone is issued and
“ERROR” appears on the display If this happens, start again from step 1
lStoring a new number...

Key Telephone FeaturesSpeed Dialing
l “CO TALK #XX” (where “XX” is the line number) appears on the
display2Press the AUTO key“A” appears on the display
3Enter the System Speed Dial code (00-89 or 000-199)
The number and corresponding name appear on the display
4Complete your call and replace the handset
The line LED changes from green to red and then goes off
To check a programmed System Speed Dial key
1Press the ON/OFF keyl The phone issues intercom dial tone
l The ON/OFF LED lights
2Press the CONF key...

Speed DialingKey Telephone FeaturesConsiderations
lIf numbers do not appear on the display when you use System Speed Dial
codes (00-89 or 
000-199), your extension is not programmed to display
that data
lThe system can be programmed to allow System Speed Dial Numbers to
override toll restrictions
lYou can make outside calls using this feature, even if your extension is
assigned to Toll Restriction type 2-6
lSpeed Dial code cannot be checked while Station Lockout is activated
Speed Dial Linking(CPC-S and...

Key Telephone FeaturesStation LockoutConsiderations
lBefore linking, you must enter the parts of the telephone number into one-touch keys or system speed dial codesFor example, program the first part
into one-touch key 
#l, the second part into one-touch key #2, etc
Station Lockout(CPC-S and CPC-M)
DescriptionUse the Station Lockout feature to dial a Station Lockout code that prevents
other users from using your phone
To activate Station Lockout
1Press the ON/OFF key
lThe phone issues intercom dial tone...