Panasonic Dbs 824 Instructions Manual

Line AppearancesOperationKey Telephone Features
OperationActionTo originate a trunk callPress an idle 
MC0 key
The key blinks (green) as the call is made
1 To nlace a call on Exclusive Trunk Hold (page 3-29) 1 Press the MC0 key
1 To place a call on System Trunk Hold (page 3- 15)1 Press the HOLD keyITo transfer a call
1 Press HOLD, dial the destination exten-
1 sion, then press PROG
Related Programmingl 
FFl (System) Least Cost Routing (LCR) Access
lFF2 (Trunks) Pooled Trunk Access for Group “9”
lFF2...

Key I elepnone t-eawres
Multi-Line (ML) Appearances(CPC-S and CPC-M)
DescriptionYou can make and receive both CO line calls and Intercom Calls using a
Multi-Line (ML) keySee 
“ML/MC0 Separation” (page 3-54) for information on assigning both
ML and 
MC0 keys to the same system
Operation
I OperationIActionITo originate an intercom or trunk callPress an idle 
MC0 key The key blinks
(green) as the call is made
To place a call on Exclusive Hold (page 3-29)
To place a call on System Hold (page 3-15)Press the...

ML/MC0 SeparationKey Telephone Features
lIf another phone answers an incoming trunk call, the ML LED on your
extension goes off and the ringing stops, indicating that the Multi-Line key
on your telephone is no longer in use
lWhen dialing an extension number with ML keys, the system
automatically selects the free Multi-Line key with the lowest number and
flashes its LED green If a 
sceond call comes in from another extension,
the next 
iwest ML key flashes green (if present)
lIf the CO line or held...

Key Telephone FeaturesMessage Waiting/Callback RequestOperation
1Pick up the handset from any extension at which you hear the Paging call
The phone issues intercom dial tone
2 Press “77 
”l Paging ceases and you are connected to the party trying to reach you
l The EXT LED lights
Related Programming
l 
FFl (System) Extension Class of Service Setting
l FF3 (Extension) Extension Class of Service Assignment
Considerations
lThe Meet-Me Answer feature cannot be used with Paging Group 00
lYou can only use the...

Message Waiting/Callback RequestKey Telephone Features
OperationTo leave a Callback Request
1Press the ON/OFF key
2Dial the extension number
“Call-EXT XXX,” “Busy-EXT XXX” or “Talk-EXT XXX” (where
“XXX’ is the extension) appears on the display
3Dial “2” at the busy tone or while the telephone is still ringing
“Accept Message” appears on the display
4Press the ON/OFF key
The Message Waiting lamp flashes at the called extension
To answer a Callback Request
1Pick up the handset.
The phone issues intercom...

Key I elephone I-eatUreSMessage vvamg/C;amacK nequesrl The phone issues intercom dial tone
l The 
ON/OFF LED lights
2
Press the CONF key twiceThe most recent Callback Request appears on the display
3
Press the ON/OFF key
The ON/OFF LED goes off
4Repeat steps 2 and 3 to view other Callback Requests
To cancel a Callback Request
1Press the ON/OFF keyl The phone issues intercom dial tone
l The ON/OFF LED lights
2
Press the AUTO key
3Press the FLASH key
“Call Back Cancel” appears on the display
4
Press the...

Non-Appearing Outside LinesKey Telephone Features
lIf a Callback Request is sent to an extension for which Call Forwarding is
set, the Callback Request will be automatically forwarded to thedesignated extensionlYou can send a Callback Request to an extension that has Do Not Disturb
or Absence Message activated
Non-Appearing Outside Lines(CPC-S and CPC-M)
DescriptionNon-appearing outside lines are trunks that are not assigned to a dedicated FF
key or to a trunk group key on your extension The DBS 824...

Key Telephone FeaturesOffhook Signaling
Offhook Signaling
(CPC-S and CPC-M)
Description
Offhook signaling sends a tone to a busy extension to indicate that another
CO call has arrived
OperationWhen you receive an 
offhook signal during a call, do the following
1Put the first call on hold
2Press the flashing FF key for the CO line of the incoming call
For details about handling multiple calls, see “Call Hold” on page 3-14
Related Programmingl FF3 (Extensions) 
Offhook Signal
l FF3 (Extensions) 
Offhook...

Offhook Voice Announce (OHVA)Key Telephone Features
Offhook Voice Announce (OHVA)(WC-S and CPC-M)
Description
You can interrupt a busy extension when making an Intercom Call, and then
use the 
Offhook Voice Announce (OHVA) feature make an announcement
that only the called party can hear You can also transfer a held call to a busy
extension after making the announcement using this feature
Operation
To make an OHVA
1Pick up the handset
2Dial the desired extension number
Lf the extension is busy, your phone...

Key Telephone FeaturesOffhook Voice Announce (OHVA)
To transfer a call using OHVA
1Press the HOLD key to place the call to be transferred on hold
2Dial the number of the extension to which the call will be transferred
If the extension is already engaged in a call, your phone issues busy tone
3Press “5” and announce the call to be transferred
If the transferred call is not accepted by the called extension, press the
FLASH key to cancel the transfer
If the transferred call is accepted, and 
Onhook Transfer...