Panasonic Dbs 824 Instructions Manual

Handsfree AnswerbackKey Telephone FeatureslIf a new code is programmed into a key, the previously programmed code
is erased
lTo erase a code programmed into a key, press the HOLD key when the
display reads “Enter Code
” “Code Cleared” then appears on the display
lThe system can be programmed so that Pooled Trunk Access calls
automatically use LCR when 9 is selected
lNight Service, DND, and BGM can be activated through FF keys without
lifting the handset.
lWhen you are making a call using the Speed...

Key Telephone FeaturesHandsfree OperationHandsfree Operation(CPC-S and CPC-M)
DescriptionHandsfree operation is available with all speakerphones This type of
operation allows you to use all available DBS 824 features without lifting the
handset
OperationTo initiate handsfree operation, press the ON/OFF key This takes the phone
offhook and provides access to the full range of calling features
Headset Operation(CPC-S and CPC-M)
DescriptionHeadset operation allows you to handle calls with a headset instead...

Intercom CallingKey Telephone FeaturesVoice Calling With voice calling, intercom calls are connectedimmediately, without a ringing tone
Tone Calling With tone calls, a ringing tone is sent to the called extensionSystem programming determines whether the DBS 824 uses voice or tone
calling as a default If voice calling is the default, dialing “1” after the
extension number changes the call to a tone call If tone calling is the default,
dialing “1” results in a voice call
Operation
To make a Voice Call...

Key Telephone Featuresintercom Calling“Talk-EXT XXX” (where “XXX” is the extension) appears on the
display
4Replace the handset
To make an Tone Call
1Pick up the handset-
The phone issues intercom dial tone
Note: If you are calling from an extension programmed for prime line
preference, press the FF key programmed for intercom operation
2Dial the extension number
3If the system default is voice calling, dial “1 ”
l “Call-EXT XXX” (where “XXX” is the extension) appears on the
display If the extension name...

Last Number RedialKey Telephone Features4Replace the handset
Related Programmingl 
FFl (System) Extension Intercom Calling
lFFl (System) Alert Tone for Voice Calls
l 
FFl (System) Extension Class of Service Setting
l FF3 (Extension) Extension Class of Service Assignment
Considerations
lWhen an extension’s calling mode is set to voice calling, a “splash” tone
can be sent to alert the extension to the voice call System programming
determines if the splash tone is provided
lIf an extension is offhook, it...

Key Telephone FeaturesLine Appearances
l “CO TALK #XX” (where “XX” is the line number) appears on the
display
2Press the REDIAL keyThe last number dialed appears on the display
3Complete the call and replace the handset.The line key LED changes from green to red and then goes off
Considerations
lIf the Auto Flash Redial feature is set, you can flash the outside line once
by pressing the REDIAL key at the busy tone You can then 
redial the last
number dialed
lThe Last Number Redial feature can redial a...

Line AppearancesDSS/BLF AppearancesKey Telephone Features
(CPC-S and CPC-M)
DescriptionWhen a 
DSS/BLF key is programmed, it automatically provides direct station
selection and busy lamp field for the assigned extension number If desired,
the 
DSS/BLF key can also provide ring monitor
For example, you can set extension A as a 
DSVBLF key on extension B
When extension A rings, the LED of the 
DSVBLF key on extension B
flashes If extension B answers the call by pressing the 
DSS/BLF key, the
LED on...

Key Telephone FeaturesLine AppearancFs
To pick up a call on a DSWBLF keyPress the flashing 
DSS/BLF key
Related Programmingl 
FFl (System) Extension (BLF) Delayed Ring
lFF4 (Ringing and Hunt Groups) Extension Ring Table
lFF5 (FF Keys) FF Key Assignments for Extensions
Considerations
lRinging assignments for DSVBLF keys are assigned through system
programming
lIf several calls arrive at an Extension Line key, the calls are queued and
ring on a first-in, first-out basis
lYou cannot assign the same DSS/BLF...

Line AppearancesKey Telephone FeaturesOperationOperationAction
To originate a trunk callPress an idle DL key
The key blinks (green) as the call is made
To place a call on Exclusive Trunk Hold (page 3-29)Press the DL key
To place a call on System Trunk Hold (page 
3- 15)Press the HOLD keyTo transfer a callPress HOLD, dial the destination exten-
sion, and then press PROG
Related Programmingl 
FFl (System) Least Cost Routing (LCR) Access
lFFl (System) Alert Tone for Busy Override and OHVA
l 
FFl (System)...

Key Telephone FeaturesLine AppearanceslBoth extensions must belong to the same paging group (l-7) Paging group
0 does not allow override
lBarge-in for Direct Lines cannot override a DL under the following
conditions
- When the DL is in a conference call
- When the DL is holding a call
-When the phone that will be barged into is holding a trunk that does notappear on an FF key
For example, if extension 200 wants to barge into a DL that appears on
extension 20 
1, extension 200 cannot barge into the DL if...