Panasonic Dbs 824 Instructions Manual

Key Bank HoldAttendant FeaturesKey Bank Hold(CPC-S and CPC-M)
DescriptionKey bank hold allows a user on a trunk call to initiate another trunk call by
simply pressing an FF key for another trunk
When the user presses the FF
key, the first trunk call is automatically placed on system hold
In addition, the attendant can use key bank hold with 
DSS/BLF keys to
provide one-touch call transfer to an extension
For example, if the attendant
phone has a 
DSS/BLF key assigned for extension 200, the attendant can...

Attendant FeaturesOne-Touch VM Transfer
Note: The VM key is assigned differently, depending on whether it is used
for personal message retrieval or attendant transfer See the following
“Operation” section for instructionsOperation
To assign a voice mail keyNote: You cannot program this feature if trunks are assigned to the key First
clear the FF assignments, then use the following procedures to assign the VM
key
1Press the ON/OFF key
l The phone issues intercom dial tone
l The ON/OFF LED lights
2Press...

One-Touch VM TransferAttendant Features
The incoming caller is transferred to the extension’s mailboxRelated Programming
lFF5 (Keys) FF Key Assignment for Extensions
lFF5 (Keys) FF Key Assignments for DSS Consoles
Considerations
lOnce an extension is connected to voice mail, pressing a DSS/BLF key
will transmit the extension number stored on the DSS/BLF key to the voicemail system, regardless of what state the 
DSS/BLF key is in
In other
words, the extension number is transmitted whether the key is idle,...

Attendant FeaturesStation Lockout Code Assignment
Station Lockout Code Assignment
(CPC-S and CPC-M)DescriptionThe Station Lockout feature allows users to dial a Station Lockout code to
restrict their phone from being used for outside calls
Station Lockout codes can be assigned through the attendant phone
Operation
To program a Station Lockout code
1Press the ON/OFF keyl The phone issues intercom dial tone
l The ON/OFF LED lights
2Press the CONF key3 Dial 
“#8 ”
4Dial the extension number
5Enter the...

Svstem Time and Date ControlAttendant FeaturesSystem Time and Date Control
(CPC-S and CPC-M)
DescriptionThe date and time displayed on 
all system extensions are set from an
attendant phone
OperationTo set the date and time
1Press the ON/OFF key
l The phone issues intercom dial tone
l The current date and time are displayed on your LCD
2Press the PROG key
“F” appears on the display
3 
Dial“#H#”“Program Mode 
” appears on the first line of the display, “MAIN
MODE” appears on the second line
4Press the FF...

Attendant FeaturesSystem Time and Date Control9Enter four digits for hours and minutes (24-hr tune)
For example, for 11 00 a m , enter “1100 
’10 Press #
11 Press the ON/OFF keyThe new date and time appear on the display
To reset the minutes display to “00 ”If the clock is five minutes slow or fast, you can re-synchronize the minutes
setting to “00,” provided the current minutes display is between 
“ 55” and
‘ 05 ”
1Press the ON/OFF keyl The phone issues intercom dial tone
l The ON/OFF LED lights
2Press...

Traffic MeasurementAttendant FeaturesTraffic Measurement(CPC S and CPC-M)
Description
An attendant phone can track the number of outgoing and incoming calls for
each outside line number, as well as the number of times each System Speed
Dial number is used This information can be used to evaluate trunk usage
and control costs
To determine the number of outgoing calls made on an outside line
1Press the ON/OFF keyl The phone issues intercom dial tone
l The ON/OFF LED lights
2Press the CONF key“C” appears on...

Attendant FeaturesTraffic MeasurementTable 2-3Traffic measurement optionsOperationCode
Display
Check the number of incoming calls to a specific trunk
#91NN“Incoming NW’
Check the number of times a System Speed Dial number
#92SS“SYS-SPD SS”
was used
Delete usage data
Notes:
#93“Clear All Inform”
1 NN = CO line number (01-08)
SS = System Speed Dial number (00-89 or 000-199)
Considerations
lThe Traffic Measurement feature can be accessed from any display phone
lUsage data cannot be cleared item by item
lAll...

Attendant FeaturesWalking COS Confirmation
Walking COS Confirmation(CPC-S and CPC-M)
Descrrp tionThe attendant can check the Walhng Class of 
Semlce ID code of any
extenson.
Operation
1. Press ON/OFF
2. Press CONF
3Dml#12 plus the extension number.
The 
Walling Class of Service ID code appears on the display
2-22
DBS 824-l O-700Issued 3/l /95 

Chapter 3. Key Telephone FeaturesThis chapter describes DBS 824 key telephone features DBS 824 key
telephones are proprietary digital phones that provide feature access through
a combination of feature keys and access codes
This chapter covers the following topics
Issued 3/l/95DBS 824-10-7003-l