Home > Panasonic > Communications System > Panasonic Dbs 824 Instructions Manual

Panasonic Dbs 824 Instructions Manual

Here you can view all the pages of manual Panasonic Dbs 824 Instructions Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 541

Independent TimersSystem Featuresl FF3 (Extension) VAUHunting Priority
Considerations
lThe following call types are routed to the first VAU message
- Trunkcalls
- Transferred trunk calls
- Intercom calls
- Transferred intercom calls
All recalls are routed to the second VAU message
Independent Timers
(CPC-S and CPC-M)
Description
The DBS $24 provides separate timers for Call Forwarding-No Answer, CO
Delayed Ring, Extension Delayed Ring, and Hunt Group--No Answer
The Call Forwarding-No Answer timer...

Page 542

System FeaturesLeast Cost Routing (LCR)Least Cost Routing (LCR)(CPC-S and CPC-M)
DescriptionLeast cost routing (LCR) automatically selects the least expensive route
available for toll calls LCR is accessed by dialing “9” before placing a call
Related Programming
Primary Program Areasl 
FFl (System) Least Cost Routing (LCR) Access
l FF3 (Extension) Forced Least Cost Routing
l 
FF8 (LCR) Time Priority RouteTablesl FF8 
(LCR) LCR Trunk Group Tables
. 
FF8 @CR) Least Cost Routing Area Codes
l 
FF8 (LCR)...

Page 543

Music-on-HoldSystem FeaturesMusic-on-Hold
(CPC-S and CPC-M)
Des&p tionThe DBS 824 can provide Music-on-Hold to parties on hold on a CO line
The Music-on-Hold feature can also be used to play announcements or
advertisements if desired
The system can provide Music-on-Hold with the internal MOH resource on
systems using the 
MPR card option (CPC-M only) See “Background Music”
on page 
l- 10 for more information
Hardware RequirementslThe music source must be purchased separately It is not provided with the...

Page 544

System FeaturesNight ServiceNight Service(CPC-S and CPC-M)
DescriptionThe Attendant can switch the system between Day and two Night Modes for
answering outside calls It is also possible to program the system to
automatically switch between night and day modes
While in a Night Mode (generally used at night or any time when your office
is closed), incoming calls can ring at selected extensions (a night watchman’s
extension, for example), an extension connected to an answering machine, or
to a Universal...

Page 545

Night ServiceSystem Featuresl The ON/OFF LED lights
2Dial “#521 ” (Note #520 can be used to toggle between modes )
3Press the ON/OFF keyl The ON/OFF LED goes off
l “DAY MODE” appears on the display
Related Programmingl 
FFl (System) Extension Class of Service Setting
lFFl (System) Ring Patterns for UNA Terminals (M, C, & B)
l FF3 (Extension) Extension Class of Service Assignment
lFF4 (Ringing and Hunt Groups) CO Day Ring Assignments
lFF4 (Ringing and Hunt Groups) CO Night Ring Assignments
lFF4 (Ringing...

Page 546

System FeaturesOff-Premises ExtensionOff-Premises Extension
(CPC-S and CPC-M)
Description
SLTs that are located in remote locations can be connected to the DBS 824
through the Off-Premises Extension (OPX) Adaptor
Off-premise phones can be connected through a direct line 
to the DBS 824 or
through the central office, depending on how far they are from the main
cabinet. For specifications, 
see Installation (Section 300)
Operation
Feature operation for OPX extensions is the same as for local SLTs...

Page 547

PagingSystem Features
Paging
(CPC-S and CPC-M)
Description
Internal paging is accomplished through the speakers of your system’s key
phones The Paging feature allows you to contact someone temporarily away
from an extension, give instructions to an entire group, or communicate with
several people at once If an external paging system is connected to your
system, pages can also be sent through its speakers
The Paging feature can also be programmed to time out after sixty seconds
When a page call times out,...

Page 548

System FeaturesPower Failure TransferlIf an external paging system has been connected to Paging Groups 00-07,
pages can be made through the external speakers Voice Paging can also be
heard over the extensions in groups 00-07
lAn extension can belong to more than one paging group
lA maximum of eight Paging Groups can be assigned to a system
lAdditional pages cannot be sent when someone is paging group 00 In fact,
if you page group 00 while other extensions are paging groups 01-07, the
latter operations...

Page 549

Power Failure TransferSystem FeatureslA Single Line Telephone Adapter (VB-40709) is required to provide
analog ports to the PFU
Considerations
lUp to four SLTs can be connected to one Power Failure Unit
lIf a call is in progress through the PFU when the power is restored, the call
will be disconnected
lFor added protection against power outages, backup batteries can be
installed in the DBS 824 Backup batteries provide full telephone service
and system features to all DBS 824 extensions for a limited...

Page 550

System FeaturesRemote MaintenanceRemote Maintenance(CPC-S and CPC-M)
DescriptionThe DBS 824 can be programmed from a remote terminal or from a remote
PC by connecting via modems to the Maintenance port on the Serial Interface
Unit (SIU) The Remote Programming Mode may also be used locally by
directly connecting to the Maintenance Port
Remote Programming Mode(CPC-S and CPC-M)
DescriptionRemote Programming Mode uses a modem connected to a “dumb” terminal
or a PC terminal program to access a modem connected...
Start reading Panasonic Dbs 824 Instructions Manual

Related Manuals for Panasonic Dbs 824 Instructions Manual

All Panasonic manuals