Panasonic Dbs 824 Instructions Manual

DSLT FeaturesCamp-onlIf the Camp-on feature is not available, the phone continues to issue
busy tone
4Replace the handset after you hear the 
ringback tone
To answer the callback ringPick up the handset when you hear the callback ring
The system automatically dials the called extension
Related Programming
.
Considerations
.
.FF3 (Extension) Call 
Waiting/OHVAThe callback ring must be answered within sixteen seconds or it will be
canceledA Camp-on request will only be accepted 
after Call Waiting status...

Conference CallsDSLT FeaturesConference Calls(CPC-S and CPC-M)
DescriptionConference Calls allow an extension user to add a party to an existing
conversation
DSLT users can create the following types of Conference Calls
lOne outside line and two extensions (three-party Conference Call)
lTwo outside lines and one extension (three-party Conference Call)
lThree extensions (Intercom Conference Call)
Operation
To add an extension
1Press the HOLD key to place the current call on hold
2Dial the number of the...

DSLT FeaturesDial 0 for Attendant,,Dial “0” for Attendant(CPC-S and CPC-M)
DescriptionThe Attendant can be called from any extension by pressing “0 
”If multiple attendants are assigned, dial “0” calls goes to Attendant “1” first
If attendant “1” is busy, the call then goes to Attendant “2 
” The call
continues to transfer to the next attendant in the attendant group, if necessary
A maximum of four attendants can be assigned
Operation
1Lift the handset.
2Press “0 ”
Related Programmingl 
FFl (System)...

Do-Not-Disturb (DND)DSLT Features2Dial “88” followed by the desired trunk number (01-08)
3Dial the outside number
Do-Not-Disturb (DND)(CPC-S and CPC-M)
DescriptionAn extension can be made unavailable by activating Do-Not-Disturb (DND)
Calls to extensions with DND activated receive busy tone
Operation
To activate DND
1Lift the handset or press ON/OFF2 Dial “73 
”
3Replace the handset or press the ON/ OFF key
To cancel DND
1Lift the handset or press ON/OFF2 Dial “73 
”
3Replace the handset or press ON/...

DSLT FeaturesIntercom Calling
differently, depending on whether they are trunk or intercom calls
Intercom calls receive busy tone, trunk calls are routed to the extension
defined in permanent call forwarding
The following types of incoming trunk calls will follow permanent call
forward settings- Direct trunk calls
- Transferred trunk calls
lThe DND feature cannot be activated at an extension selected to receive
call Forwarding
Intercom Calling(CPC-S and CPC-M)
DescriptionsThe DBS 824 provides two methods...

Last Number RedialDSLT Features
To make an Tone Call
1Lift the handset
2Dial the extension number
3If the system default is voice calling, dial a “1 ”The called extension rings
Related Programmingl 
FFl (System) Extension Intercom Calling
lFFl (System) Alert Tone for Voice Calls
lFFl (System) Extension Class of Service Setting
lFF3 (Extension) Extension Class of Service Assignment
Considerations
lWhen an extension’s calling mode is set to voice calls, a “splash” tone can
be sent to alert the extension to...

DSLT FeaturesMeet-Me Answer
2Dial a trunk access code (81-86 or 9)
3Press the REDIAL key
ConsiderationslIf the Auto Flash Redial feature is set, you can flash the outside line once
by pressing the REDIAL key at the busy tone The last number dialed can
then be redialed
lThe Last Number Redial feature can redial a number up to sixteen digits
long
lA maximum of five Speed Dialing codes can be redialed
Meet-Me Answer(CPC-S and CPC-M)
DescriptionYou can answer a Paging call from any extension using the...

Message Waiting/Callback RequestDSLT Features
lIf an external paging system or a Universal Answer system has been
installed, use Group Call Pickup to respond to the Paging callMessage Waiting/Callback Request(CPC-S and CPC-M)
DescriptionIf you call an extension that is busy or does not answer, you can leave a
message requesting a return call
Operation
To leave a Callback Request
1Lift the handset
2Dial the extension number
3Dial “2” at the busy tone or while the telephone is still ringing
4Replace the...

DSLT FeaturesOff-Hook Voice Announce (OHVA)Off-
4Replace the handset or press the ON/OFF key
Related Programmingl 
FFl (System) Extension Class of Service Setting
l FF3 (Extension) Extension Class of Service Setting
ConsiderationslUp to four Callback Requests can be sent to one extension
lIf you call the same extension a second time and the party answers,
Callback Requests you sent earlier will be cancelled
lIf a Callback Request is sent to an extension that has Call Forwarding
enabled, the Callback...

Off-Hook Voice Announce (OHVA)DSLT Features
3Upon hearing busy tone, press “5 ”
To transfer a call using OHVA
1Press the HOLD key
2Dial the number of the extension to which the call will be transferred
Your phone issues a busy tone if the extension is already on a call
3Press “5” and announce the call to be transferred
lf the transferred call is not accepted by the called extension, press the
FLASH key to cancel the transfer
4 Press “8 
”
5Replace the handset
To answer the call from a DSLT
1Press CONF to...