Panasonic Dbs 824 Instructions Manual

FFlExtension Transfer Recall Timer for Intercom Calls
Extension Transfer Recall Timer for Intercom Calls
Software VersionCPCS and CPC-M, Version 1 0 and higherAddress 
FFI 3## 21# (0-l2)#
DescriptionWhen one extension transfers a call to another extension, the call will recall to
Ihe transferring extension if it is not answeredThis timer determines how
long the transferred call will ring before it recalls
Programming
FFl 3## 21# (0112)#
f
Timer Setting (Default=7
see the following table)
Table l-25Recall...

CO Delayed Ring TimerFFl
CO Delayed Ring Timer
Software VerGonCPCLS and CPC-M, Version 1 0 and higherAddress 
FFl 3# 22# (0-15)#Description
CO Delayed Ringing allows a secondary phone to ring when incoming trunk
calls to a primary phone are not answeredThis timer determines how long
the trunk call will ring at the primary phone before it begins ringing at the
secondary phone(When the secondary phone begins ringing, the primary
phone will stop ringing )
Programming
FFl 3## 22# (0:15)#
Timer Setting...

FFlCO Delayed Ring Timer
Related ProgrammingDelayed Ring 
FFl 2# l# 21# (0 or l)#
CO Delayed Day Ring AssignmentsFF4 5# (ExtPort)## (Trunk)#
CO Delayed Day Ring Assignments for Hunt GroupsFF4 5# (HuntGrp)#
(Trunk)#
CO Delayed Night 1 Ring AssignmentsFF4 6# (Ext.Port)# (Trunk)#
CO Delayed Night 1 Ring Assignments for Hunt GroupsFF4 6#
(Hunffirp)# (Trunk)#
CO Delayed Night 2 Ring Assignments FF4 9# 2# (ExtPort)# (Trunk)#
CO Delayed Night 2 Ring Assignments for Hunt GroupsFF4 9# 2#
(HuntGrp)# (Trunk)#...

Extension Delayed Ring TimerFFl
Extension Delayed Ring Timer
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 3# 23# (0-15)#
DescriptionExtension Delayed Ringing allows a secondary phone to ring when a primary
phone is not answeredThis timer determines how long the primary phone
will ring before the call begins ringing at the secondary phone
Programming
FFl 3## 23## (O+)#Timer Setting (Default=2
see the following table)
Table 1-27Timer values for extension delayed ringing
Number
0
1...

FFlExtension Delayed Ring Timer
Related ProgrammingExtension 
(BLF) Delayed Ring FF1 2# l# 27# (0 or l)#Extension Delayed Ring Table FF4 
8# (TargetExtPort)# (SourceExtPort)#
Issued 3/l/95DBS 824-10-400l-107 

Hunt Group No Answer TimerFFlHunt Group No Answer Timer
Software VersionCPC-S and CPC-M, Version 1 0 and higher
Address 
FFl 3# 24# (0-15)##
DescriptionIf a call has entered a hunt group and the first extension to ring is not
answered, this timer determines how long the extension will ring before the
next idle extension in the hunt group begins ringing
Programming
FFl 3## 24# (0-15)#
f
Timer Setting (Default=2,
see the following table)
Table l-28 Hunt group no answer timer values
NumberValue
0After 4...

FFlAutomatic Day Mode Start Time
Automatic Day Mode Start Time
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 3## 25# HHMM#
DescriptionAutomatic Day Mode allows the DBS 824 to go into “Day
modeautomatically
Automatic Night 1 Mode (FFl 3# I#) and Automatic Night 2 Mode (FFI
3# 29#) allow the DBS 824 to go into “Night 1” and “Night 2” mode
automatically
Programming
To program automatic day mode
Enter the time using the 24-hour format. The following example sets the time
to830am
FFl W...

Automatic Day Mode Start TimeFFlIf both Auto Day and Auto Night modes are turned on the attendant NIGHT
key cannot be usedWhen one Auto mode is turned on the mode cannot be reset by the NIGHT
key until 3 minutes after the Auto mode is activated(When both Auto modes
are set, the NIGHT key cannot be used )
Required Intervals Between Auto Day and Night ModesIf both Auto
modes are set, the manufacturer recommends that the starting times of the
modes differ by at least one hour
l-110DBS 824-10-400Issued 3/l/95 

FFlWait Timer For Auto-Repeat Dialing
Wait Timer For Auto-Repeat Dialing
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 3# 26# (0-15)#
DescriptionUse this program to set the amount of time the DBS 824 will wait before
automatically redialing a 
number
Programming
FFl 3# 26# (0-15)#
+Timer Setting (Default=8
see the following table)
Table 1-29 Auto-Repeat dialing wait timer values
Number
0
1
2
3
4
1 second
5 seconds
10 seconds
15 seconds
20 seconds
Value
525seconds
630seconds...

Wait Timer For Auto-Repeat DialingFFlBusy Tone 
(BT) Detection Timer FFl 3# 27#Dial Tone (DT) Detection Timer 
FFl 3# 28#CO Busy Tone 
(BT) Detection for Auto-Repeat Dialing
FF2 (Trunk)# 22#l-112
DBS 824-l O-400Issued 3/l /95