Panasonic Dbs 824 Instructions Manual

FFlCustom Screen Soft-Key Assignment
Custom Screens
Custom Screen Soft-Key Assignment
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# 7# 1# (Screen)# (SoftKey)## (Feature)#
DescriptionUse this program to create up to 15 custom menu screens for large-display
phonesEach screen can contain up to 10 feature codes (one feature code per
soft key)
‘ Soft keys ’ are the 10 buttons located on the left and right sides of
the LCD display window on the large-display phone (see figure...

Custom Screen Soft Key AssignmentFFl
Programming
FFl 2# 7# l# (2539)# (l-lO)# (xxxxxx)#Screen Number
Y Soft Key Lumber‘i,,tu.r e Code
25=Custom Screen 1(see figure previous page)(see table below
26=Custom Screen 2
27=Custom Screen 3
28=Custom Screen 4
29=Custom Screen 5
30=Custom Screen 6
3 
l=Custom Screen 7
32=Custom Screen 8
33=Custom Screen 9
34=Custom Screen 10
35=Custom Screen 11
36=Custom Screen 12
37=Custom Screen 13
38=Custom Screen 14
39=Custom Screen 15
Tqble I 4Feature codes that can be...

FFlCustom Screen Soft-Key Assignment
Feature
Direct Call Pickup
Direct Trunk Selection
Code to be assigned to Soft Key
79
I 01 02 etc
DSS key
DWF Conversion
Extension Directory
Group Call Pickup
Headset
Lockout
Meet Me Answer
Message Callback
Message 
WaitinglCO Queuing
Mute
Night 1 mode
Night 2 mode
Offhook Voice Announce
Offhook Voice Announce Answer
Page (00-07)
Personal Speed Dial Directory
Personal Speed Dial Numbers
Release
1 PROG (10-69) or (100-699)PROG PROG 
FF11 or PROG PROG FF12
900002
70
FF12...

Custom Screen Soft Key AssignmentFFI
Related ProgrammingCustom Screen Text 
FFl 2# 7# 2# (Screen)# (Key)## (Text)#Custom Screen Default 
FFl 2# 7# 3# (Screen)# (0 or l)#Custom Screens Default (All) 
FFl 2# 7# 4# (0 or l)#
Display Screens During Call States FF3 
(ExtPort)# (26-33)# (Screen)#
NotesFFlI and FF12 in the Feature CodesWhen entering the feature codes in
this FFl 2# 7# l# address the phone will display the code numbers as you
press them, except for FF 11 and FF12 (the phone will nat display any...

FFlCustom Screen Text
Custom Screen Text
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# 7# 2# (Screen)# (SoftKey)# (Text)#
DescriptionUse this program to create the text that identifies the soft keys on a custom
menu screen for large-display phonesThe text for each soft key can be up to
8 characters long
Use a DSS/I2 console (with alphabetic keys) or the remote
programming mode on a large-display phone (scroll through the alphabetic
characters on the digital keypad) to assign the...

Custom Screen DefaultFFlCustom Screen Default
Software VersionCPC-S and CPC-M, Version 1 0 and higher
Address 
FFl 2# 7# 3# (Screen)# (0 or l)#
DescriptionUse this program to reinstate individual custom screens to the default value
(blank no features assigned to soft keys)
Programming
Fy9)# (Of’ l)#Screen Number
O=Do not return to default setting
25=Custom Screen 1l=Retum to default setting
26=Custom Screen 2
27=Custom Screen 3
28=Custom Screen 4
29=Custom Screen 5
3O=Custom Screen 6
3 1 =Custom Screen...

FFlCustom Screens Default (All)
Custom Screens Default (All)
Software Version
CPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# 7# 4#/ (0 or l)#
DescriptionUse this program to reinstate all 15 custom screens to the default value(blank, no features assigned to soft keys)
Programming
FFl 2# 7# 4## (Oorl)#
f
O=Do not return to default setting
l=Return to default setting
Related ProgrammingCustom Screen for Soft Keys 
FFl 2# 7# 1# (Screen)# (Key)# (Feature)#Custom Screen Text 
FFl 2# 7# 2# (Screen)#...

Automatic DISA CallersFFl
Caller ID Automatic DISAAutomatic 
USA Callers
Software VersionCPC-M Only (Version 1 0 and above)Address 
FFl 2# #I (1.lO)# (PhoneNo )#
DescriptionUse this program to assign up to 10 phone numbers for the Caller ID
Automatic DISA (Direct Inward System Access) featureWhen a caller (e g
company salesman) calls from one of the phone numbers assigned in this
address, the trunk receiving the call will automatically switch to 
DISA
without requiring the caller to enter an ID Code
The...

FFlParity Check (Maintenance Port)
Maintenance Data (Serial Port CN2)
Parity Check (Maintenance Port)
Software VersionCPCS and CPC-M, Version 1 0 and higher
AddressFFl 2# 9# 1# (0 or 1 )#
DescriptionThis program determines whether the DBS 824 uses parity checking over
serial port CN2, which is normally dedicated for remote maintenance
If this address is set to “on ’ (default setting), use FFl 2# !J# 2# (0 or l)# to
select Even or Odd parity
Programming
FFl 2# 9# l# (0 or l)#
t
O=Tums off the parity...

DescriptionLf the parity check for Maintenance port CN2 has been set (FFl 2# 9# l#)this option determines whether the check is based on an even count or an odd
countOdd/Even Parity (Maintenance Port)
FFl
Odd/Even Parity (Maintenance Port)
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# 9# 2# (0 or l)#
Programming
Notes
Checking Communications ParametersBe sure to properly set all
communication programming addresses when modifying any single address
valueCommunication parameters for...