Home > Panasonic > Communications System > Panasonic Dbs 824 Instructions Manual

Panasonic Dbs 824 Instructions Manual

Here you can view all the pages of manual Panasonic Dbs 824 Instructions Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 201

FFlPBX Access Code(s)
PBX Settings
PBX Access Code(s)
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# 3## (l-8)# (O-999 or O*-99*)#
DescriptionThe DBS 824 can dial up to 8 different PBX access codesThese codes canbe one, two or three digits long
This feature is used when the DBS 824 is
installed behind a PBX and has toll restrictions enabled
The feature preventsthe DBS 824 from regarding the PBX access code digit(s) as part of a dialed
number
Programming
To program an access code...

Page 202

Automatic Pause Position For PBX Access CodesFFl
Automatic Pause Position For PBX Access Codes
Software VersionCPCS and CPC-M, Version 1 0 and higherAddress 
FFS 2# 3# (9-18)# (l-3)#
DescriptionThis program inserts a pause in the PBX access code (and in SSD and PSD
codes) after the output of the first, second, or third digit
The pause ensures that the PBX has time to connect to the central office
before the DBS 824 sends the PBX any digits
If an adequate pause is not
allowed, the DBS 824 will send digits...

Page 203

FFlAutomatic Pause Position For PBX Access Codes
To reset an automatic pause to default
FFI 2# 3# (9 to 18)# CONF ON/OFF
tFirst Digit of PBX Access Code
(see table, previous page)
Examples
Inserting a pause after the PBX access code “9X”To insert a pause after the PBX access code “9X’ is dialed, enter this address
(’ X represents the numbers O-9)
FFl 2# 3# 17# 2#
This sequence will insert a pause between the “9X” and the rest of the dialeddigits For example,
91+ PAUSE + 4045555793
Inserting a pause after...

Page 204

Ring Patterns For UNA Terminals (Ml, Cl, & Bl)FFl
External (UNA) Relay Control
Ring Patterns For UNA Terminals (Ml, Cl, & Bl)
Software VersionCPC-M Only (Version 1 0 and above)
Address
FFl 2# 4## l# (0 or l)#
DescriptionUse this address to set the ring pattern for incoming trunk calls sent to
Universal Night Answer (UNA)The UNA feature allows these calls to be
signalled over a loudspeaker or amplifier
This address actually controls the UNA relay terminals labeled “Ml”, ‘Cl”
and “B 1 ’ (located on...

Page 205

FFlExternal Page Interface Control For Paging Groups
External Page Interface Control For Paging Groups
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# 4# (209)# (0 or l)#
DescriptionThis setting determines whether a page is heard over an external page device
connected to the 824This device is normally a loudspeaker installed in the
ceiling and connected to the 824 via the “EPA” phono-jack (for audio path)
on the CPC-S and CPC-M cardsOn the CPC-M card, a device can also he
connected...

Page 206

Extension Class Of ServiceFFl
Class of Service
Extension Class Of Service
Software VersionCPC-S and CPC-M, Version 1 0 and higher
Address
FFl 2# 5# (1-8)# (1121)# (0 or l)#
DescriptionThis address allows you to assign features to a Class of ServiceThe Class of
Service can then be assigned to individual extensions using program address
FF3 (ExtPort)# 35#
A maximum of 8 different Classes of Service can be definedEach Class of
Service can contain unique combinations of on/off settings for the 2 1 features...

Page 207

FFlExtension Class Of Service
Related Programming
Extension Class of Service Assignment J?F3 (ExtPort)# 35#
NotesInteraction with Extension Class of Service Assignment. The Extension
Class of Service Assignment address (FF3 
ExtPor& 3%) determines which
Class of Service 
iS; used by a particular extensionBy default, every
extension is assigned to Class of Service “o”, which provides access to all 21
of the Class of Service features and cannot be modified to restrict feature
usage(Use Class of Service 1-8...

Page 208

Verified Forced Account CodesFF1
Account Codes
Verified Forced Account Codes
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# W (l-lOO)# l# (OOOl-9999)R
DescriptionThis program allows you to assign up to 100 four-digit verified account
codesOnce the account codes are assigned, use address 
FFl 2# 6# (l- lOO)#
2# (0-7)# to assign a Toll Restriction Setting (TRS) value to the account code
If an extension is set to use Verified Forced Account Codes, the system will
check all dialed...

Page 209

FFIVerified Forced Account Codes
ExamplesAssigning 1234 as Account Code 1
To assign1234” as Account Code 1, enter this address
FFl 2## 6# l# l# 1234#Assigning 9999 as Account Code 100
To assign “9999” as Account Code 100, enter this address
FTl2# 6## loo## l# 9999#
Related Programming
Toll Restriction For Verified Forced Account Codes FFl 2# 6# (l-lOO)#
2# (O-7)4+Forced Account Codes FF3 
(ExtPort)# 5# (0 or l)#
Toll Restriction Settings FF7
NotesInteraction With TRSThe default TRS type for Verified...

Page 210

Toll Restriction For Verified Forced Account CodesFFl
Toll Restriction For Verified Forced Account Codes
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# 6# (l-l OO)# 2# (0-7)#Description
Programming
Use this address to assign toll restriction (TRS) types to Verified Forced
Account Codes
A caller who enters the account code will be restricted by the
TRS type assigned to the ucc~unt code (not the TRS type assigned to the
extension)
FFl 2# 6#! (l-lOO)# 2# (O-7)#
t f
Account Code Entry...
Start reading Panasonic Dbs 824 Instructions Manual

Related Manuals for Panasonic Dbs 824 Instructions Manual

All Panasonic manuals