Panasonic Dbs 824 Instructions Manual

FF1Key Bank Hold
Key Bank Hold
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# l# 9# (0 or l)##
Description
ProgrammingUse this program address to enable or disable the Key Bank Hold feature in
the DBS 824 systemIf Key Bank Hold is enabled, a phone user can switch back and forth 
behveen
trunk calls (by pressing the FF key for each trunk) without placing the current
trunk on holdAlso, an attendant phone can press a 
DSVBLF key to
automatically transfer a trunk call to an extension...

Non Appearing Trunk HoldFFl
Non-Appearing Trunk Hold
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# l# 10# (0 or l)#
DescriptionUse this program to determine who can pick up trunk calls that are on hold
This program applies to DBS 824 telephones that don t have dedicated key
appearances for trunk calls (the phone user can t tell which trunk is being
used for incoming or outgoing calls)
If a trunk call on one of these phones is placed on hold, this program
determines whether it is...

FFlSLT Flash Control
SLT Flash Control
Software VersionCPC-S and CPC-M, Version 1 0 and higher
Address
FFI 2# l# ll# (0 or l)#
DescriptionTo transfer a call, a Single Line Telephone (SLT) user hooktXashes to place
the call on hold, dials an extension number, and then hangs up
This program address determines how the DBS 824 system responds to a
second 
hookflash once the extension number is dialedIf this program is set
to “0,” a second 
hookflash results in dial toneIf set to “1” (default), a second...

SLT Flash ControlFFl
ProgrammingI
FFl 2# l# ll# (0 qr l)#
f
O=A second SLT hookflash results in dial tone
l=A second SLT hookflash retrieves a held callPage146DBS 824-l O-400
Issued 3/l/95 

FFlExtension Number Digits
Extension Number Digits
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# l# 12# (0 or l)###
DescriptionThis address determines whether the DBS 824 system will use 2-digit or 3-
digit extension numbers
Lf 2-digit numbers are used, a maximum of 60 extension numbers are
available for assignment (number 
range=10 thru 69)If 3-digit numbers are
used, a maximum of 600 extension numbers are available (number range=100
thru 699)
Homeever, the number of extensions...

Attendant Intercom CallingFF1
Attendant Intercom Calling
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# l# 13## (0 or l)#
DescriptionUse this program address to determine how intercom calls from an attendant
telephone will be announced at extension phones
The extension phone will
either ring, or it will establish a voice path on the phone’s loudspeaker so the
attendant can talk to (and hear) the extension phone user
Programming
I1
FFl 2# l# 13# (Oor l)#
f
O=Ring tone calling...

FFlExtension Intercom Calling
Extension IntercorH Calling
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# l# 14#I (0 or l)#
DescriptionUse this program address to determine how intercom calls from another
extension will be announcedThe extension phone being called will eitherring, or it will establish a voice path over the phone s loudspeaker so the
extension caller can talk to (and hear) the person being called
Programming
FFl 2# l# 14## (0 or l)#
t
O=Tone calling
l=Voice calling...

Alert Tone for Voice CallsSoftware VersionCPC-S and CPC-M, Version 1 0 and higher
Address 
FFl 2# 1# 15# (0 or l)#
DescriptionAn initial “splash’ tone for voice intercom calls can be sounded for 0 5
seconds before the caller s audio path is connected
Programmingh1
FFl 2# l# 1W (0 or l)#
t
O=Alert tone is disabled
l=Alert tone is enabledPage 
I-20DBS 824- 1 O-400Issued 3/l 195 

FFlAlert Tone for Busy Override & OHVA
Alert Tone for Busy Override & OHVA
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2# 1# 16# (0 or l)#
DescriptionThis address determines if Attendant Override, Busy Override, and Offhook
Voice Announce (OHVA) calls are preceded by an alert toneThis feature is governed by state law -- some states require the alert tone
Programming
FFl 2# l# 16# (0 or l)#
O=Alert tone is disabledl=Alert tone is enabled
Related ProgrammingBusy Override Send FF3...

System Installation Area Code!=Fl
System Installation Area Code
Software VersionWC-S and CPC-M, Version 1 0 and higherAddress 
FFl 2## 1# 17# (0 or l)#
DescriptionThis program determines if the DBS 824 system’s location requires a “1” to
be dialed before the area code to make long-distance calls
This setting will
affect the way the 824 system handles Toll Restriction (TRS) and Least Cost
Routing (LCR) for long-distance calls
In almost all cases, the default setting (“1’ must be dialed) should not be...