Panasonic Dbs 824 Instructions Manual

FFIExtension Park Hold Recall Timer
Extension Park Hold Recall Timer
Software Version
CPCS and CPC-M, Version 1 0 and higher
AddressFF1 3# 7# (O-12)#Description
Programming
If an extension parks a call, the parked call will recall if it is not picked up
This program determines how long the parked call will be held before it
recalls
FFl 3## 7# (O-12)#
$
Recall Timer (Default=7
see the following table)
Table l-I2Extension park hold recall timer values
NumberValue
0No recall
120 seconds
240 seconds
360...

Attendant Call Reversion TimerSoftware VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 3# 8# (O-12)#
DescriptionBy default the DBS 824 ultimately causes unanswered calls to revert to the
attendant
For example, if an extension places a call on hold and the held call recalls to
the extension the recall reverts to the attendant if it is not answeredAlso, if
a transfer recall is not answered by the transferring extension it also reverts to
the attendant.
This timer determines how long an...

FF?Attendant Ml Heversion Timer
9
180 seconds
10200 seconds
111 220seconds
12
1 240 seconds
NotesNight Mode RestrictionThis feature is not available when the DBS 824 is inNight 
1” or Night 2’ mode
Issued 3/l 195DBS 824-l O-400 

Unsupervised Conference TimerFFIUnsupervised Conference Timer
Software VersionCPC-S and CPC-M, Version 1 0 and higher
Address 
FFl 3# 9# (0-15)#
DescriptionThis program determines how long a conference call can continue between
two trunks after a DBS 824 extension drops out of the conference
When the
timer expires, the conferenced trunks automatically disconnect (there will be
no warning tone to the conferenced parties)
This timer also determines how long outbound trunk calls made through
DISA can last....

bt-1u~tbuperv~seu burlrerence I lmer
Related Programming
Unsupervised Trunk Conference FJ?2 (Trunk)# 16#Unsupervised Conference 
FF3 (ExtPort)# 13#
Issued 3/l/95DBS 824-10-4001-87 

Automatic Pause TimerSoftware VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FFl 3# lO# (0115)#
DescriptionWhen users program their phones with PBX access codes, Personal Speed
Dial numbers or System Speed Dial numbers, they can insert pause(s) in these
numbers (by pressing the REDIAL key for each pause) so the system will
dial the numbers correctlyThis program address determines the length of
each pause 
inserted by the REDIAL programming key
Programming
FFl 3## lO# (0115)#
Timer Setting...

FFlAutomatic Pause Timer
Related ProgrammingAutomatic Pause for PBX LineFF2 
(Trunk)# 13# (0 or l>#PBX Access Codes
FFl 2# 3# (l-8)# (O-999 or 0* 9*)##Automatic Pause Position for PBX Access Codes
FFl 2# 3# (9-18)#
(1 3)#
Issued 3/l /95DBS 824-l O-400l-89 

CO flash TimerFFl
CO Flash Timer
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FF1 3# 11# (0115)#
DescriptionIn the DBS 824 system a phone user can press the FLASH key to disconnect
from and then reseize a CO loop-start trunk (this operation is called a
‘flash ‘)Pressing the REDIAL key also performs a flash before
automatically redialing a phone number
This CO Flash 
Tier determines how long a flash to a CO will last if the
FLASH key or the REDLAL key is depressed (pressed and then...

FFlCO Flash Timer
101 1 seconds
1115 seconds
122 seconds
132 5 seconds
143 0 seconds
153 5 seconds
Related ProgrammingPBX Flash Timer 
FFl 3# 16# (0-lO)#
Auto Flash RedialFFl 2# l# 6# (0 or l)#
Trunk Circuit TypeFF2 (Trunk)# 21# (0 or l>#
NotesCircuit Card RequirementsTimer settings 1 l- 15 are only available with the
208 Expansion Card (Part No VB-4265 1)
Phone Z)pe Rest&ionThe FL,ASH key function applies only to digital
and digital single-line telephones
Trunk Type Resfricfion
This timer only applies...

SLT Onhook Flash Timer
Software VersionWC-S and CPC-M, Version 1 0 and higherAddress 
FF1 3# 12# (016)#
DescriptionThis timer determines how long an SLT user must hold down the switchhook
before the DBS 824 recognizes a hoolcflash
A setting is also provided to
prevent users from performing a hookflash on an SLT
Programming
FFl 3## 12# (O-6)#
f
Timer Setting (Default--Q
see the following table)
Table 1-I 7SLT flush timer values
1 Number 1Flash Treatment0
No DetectionValid Fliuh1 Disconnect...