Panasonic Dbs 824 Instructions Manual

DTMF/Pulse Dialing for TrunksFF2
DTMF/PuIse Dialing for Trunks
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF2 (Trunk)# 
2# (0 or l)#
DescriptionUse this feature to set a trunk for D’T’MF or pulse dialing (10 pulses per
second)
ProgrammingFF2 
(l-6 or I-8)# 2# (0 or l)#
f fTrunk Number
CPC-S l-6
CPC-M l-8
O=DTMFl=Pulse dialing (10 pps)
2-4DES 824-l O-400Issued 3/l /95 

FF2Pooled Trunk Access for Group 9Pooled Trunk Access for Group 
“9”
Software VersionCPGS and CPC-M, Version 1 0 and higher
AddressFF2 (Trunk)## 3## (0 or l)##
DescriptionUse this feature to place a trunk in a group from which trunks are
automatically chosen for outbound dialingWhen you dial “9” from an SLT
or digital extension, or press an FF key that is set as a pooled trunk key any
available 
trunk in the group will be accessed
The trunk selection is made from the 
highest trunk number in the group to...

PooledTrunkAccesstof Groups 81-86FF2
Pooled Trunk Access for Groups ‘r81-86”
Software VersionCPC-S and CPC-M, Version 1 0 and higher
AddressFF2 (Trunk)# 
(4-9)# (0 or l)#
DescriptionUse this feature to place a trunk in a group from which trunks are
automatically chosen for outbound dialing When you dial 8 
1,82,83,84,85
or 86 from an SLT or digital extension, or press an FF key that is set as a
pooled trunk key, any available trunk in the group will be accessed
The trunk selection in a particular group...

FF2Trunk Port Type
Trunk Port Type
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF2 
(Trunk)# lO# (1 or 2)#
DescriptionEach trunk port must be identified as a regular CO trunk or as a PBX line
Programming
1FF2 (1-6 or 
l-8)# lO# (1 or 2)#
tt
Trunk NumberCPC-S 
l-6CPC-M l-8
l=Regular (CO) trunk
2=PBX line
NotesToll Restriction InteractionToll restriction (TRS) settings (FF7) can be
affected by this parameter
issued 3/l 195DBS 824-l O-4002-7 

DISA Auto AnswerFF2
DISA Auto Answer
Software VersionCPC-S and CPC-M, Version 1 0 and higher
AddressFF2 
(Trunk)# ll# (0 or l)#
DescriptionUse this feature to set a trunk(s) to automatically provide DISA tone upon
connection with an inbound caller(However after hearing the DISA tone
the caller will still have to enter an 
ID code in order to use DISA )
If a trunk is set to provide DISA tone, you can limit DISA operation on that
trunk to a certain number of hours each day using the DISA Start Time and...

FF2Private Trunk Line
Private Trunk Line
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF2 (Trunk)# 
12# (ExtPort)#
DescriptionUse this address to assign a private trunk line to an extensionA number of
private trunks can belong to one extension but the same private 
mmk cannot
be assigned to multiple extensions
Once a private trunk is assigned to an extension, other extensions cannot
make outbound calls or receive inbound calls on that trunk (the system will
assign Toll Restriction Type...

Automatic Pause for PBX LineFF2Automatic Pause for PBX Line
Sofhvare VersionCPC-S and CPC-M, Version 1 0 and higherAddress 
FF2 (Trunk)# 13# (0 or l)#
DescriptionThis address determines if a pause is automatically inserted during the dialing
of a PBX access code
If this address is enabled, the system will automatically pause after dialing the
fust, second or third digit of the PBX access code, see program address FFl
2# 3# (9- 18)# (l-3)# for more information
If this address is disabled (default...

FF2Dial Tone Detection
Dial Tone Detection
Software VersionCPC-S and CPC-M, Version 1 0 and higher
AddressFF2 (Trunk)# 
14#I (0 or l)#
DescriptionThis program determines when dialed digits are outpulsed -- either according
to the Dial Pause Timer setting 
(FFl 3# 15#), or after the 824 system detects
dial tone
ProgrammingFF2 
(l-6 or l-8)-# 14# (0 or l)#
ffTrunk Number
CPC-S l-6
CPC-M 1-8
O=Digits are outpulsed according to the
Dial Pause timer
l=Digits are outpulsed after dial tone
is detected
Related...

Outbound DTMF Signal Duration for Auto-Dialed DigitsFF2
Outbound DTMF Signal Duration for Auto-Dialed Digits
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF2 
(Trunk)# 15## (l-3)#
-
DescriptionThis program controls DTMF signal duration when digits are dialed by the
system rather than the user
Examples of system dialing include Redial,
Saved Number Redial Speed Dialing and LCR Digit Addition
ProgrammingFF2 
(l-6 or l-8)# 15# (113)#
tf
Trunk Number1=75 m on/50 ms offCPC-S 1-6
2=125 ms...

FF2unsupefwsea IrunKc;onterence
Unsupervised Trunk Conference
Software VersionCPC-S and CPC-M, Version 1 0 and higher
AddressFF2 (Trunk)# 
16# (0 or l)#
DescriptionUse this feature to enable trunk(s) to be used in an unsupervised conference
call
Programming
FF2 (1-6 or l-8)# 16## (0 or l)#Trunk Number
CPC S l-6
CPC-M l-8
O=The CO trunk cannot be used for
an unsupervised conference
l=The CO trunk can be used for an
unsupervised conference
Related ProgrammingUnsupervised Conference Timer 
FFl 3# 9#...