Panasonic Dbs 824 Instructions Manual

Prime Line Pickup
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 
11# (0 or l)#
DescriptionThis feature allows the user to automatically pick up a trunk assigned to the
FFI key by simply picking up the receiver
If the 
FFl key is a pooled trunk key, an available trunk is accessed in
numerical order from the highest trunk number assigned to the key to the
lowest.
ProgrammingFF3 (1-16 or 
l-24)# 11# (0 or l)#
t
Extension PortO=OffCPC-S 1-16
l=OnCPC-M 1-24
NotesProviding for...

FF3Auto Pickup (Ringing Line)
Auto Pickup (Ringing Line)
Software VeisionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 
(ExtPort)# 12# (0 or l)#
DescriptionUse this program to enable the ability to pick up the receiver at a ringing
extension and connect an incoming CO line call, hold recall or transferred
Cdl
ProgrammingFF3 (1-16 or 
l-24)# 12# (0 or l)#tt
Extension Port
O=Disable Au to PickupCPC S 1-16
l=Enable Auto Pickup
CPC-M l-24
Issued 3/l /95DBS 824-l O-4003-l 5 

Unsupervised ConferenceFF3Unsupervised Conference
;-Software VersionCPC-S and CPC-M, Version 1 0 and higher
Address FF3 
(ExtPort)# 13# (0 or l)#
DescriptionThis feature enables an extension user to initiate a three-party conference
between two trunks and the extension
Once the conference is initiated, the
extension user can drop out of the call by pressing either of the trunk keys
used to call the other parties
Programming
FF3 (l-16 or l-24)# 13# (0 or l)#
ff
Extension PortO=The extension cannot...

FF3Station Message Detail Recorder (SMDR)
Station Message Detail Recorder (SMDR) Report
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 
14## (0 or l)#
DescriptionAny extension can be removed from the SMDR report, so that call activityfrom that port will not be recorded
Programming
IFF3 (l-16 or 
I-24)# 14## (0 or l)#
ftExtension Port
O=The extension is not included in the
CPC-S 1-16SMDR report
CPC-M l-24
l=The extension is included in the
SMDR report
Related ProgrammingSMDR...

Offhook Signal VolumeFF3
Offhook Signal Volume
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 
15# (0-4)#
DescriptionOffhook signaling volume can be set to five different levels
Programming
1FF3 (l-16 or 
l-24)# 1% (0-4)#
ttExtension Port
O=Lowest volume levelCPC-s 1-16
l=Next to lowest volume level
CPC-M l-24
2=Next highest volume level
3=Next highest volume level
4=Highest volume level
Related ProgrammingAlert Tone for Busy Override 
8z OHVAFFl 2# l# 16#
Offhook SignalFF3...

FF3Offhook Signal Pattern
Offhook Signal Pattern
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddressFF3 (ExtPort)# 
16# (0 or l)#DescriptionThe 
offhook signaling tone can be sent repeatedly or only once
ProgrammingFF3 (l-16 or 
l-24)# 16# (0 or l)#
ftExtension Port
O=Repeated tone burstCPC-S 1-16
(approximately every 6 seconds)CPC-M 1-24
l=Sinnle tone burst
Related Programming
Offhook SignalFF3 (ExtPort)# 7# (0 or l)#
Offhook Signal VolumeFF3 (ExtPort)# 15# (0 or l)#Issued 
3/l 195DBS 824-l...

PSD Name Display on Large-Sized LCD PhonesFF3
PSD Name Display on Large-Sized LCD Phones
Software VersianCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 
17# (0 or l)#Description
The large-screen phone can show either 5 or 10 personal speed dial names,
depending on this settingProgramming
FF3 (l-16 or 
l-24)# 17# (0 or l)#
t
Extension PoriCPC-S 1-16
CPC-M l-240=5 PSD names display
l=lO PSD names displayRelated Programming
Personal Speed Dial NamesFF6 3# (ExtPort)# (PSD)#
Personal Speed Dial...

FF3Page Group ExtensionsPage Group Extensions
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 
(18-25)# (0 or l)#
DescriptionUse this program address to include an extension in one or more of the eight
page groupsIf an extension is included in a page group, pages to that group
will be heard on the extension phone’s loudspeaker Also the extension will
be able to pick up calls to other extensions in the page group using the Group
Call Pickup feature
Programming
FF3 (l-16 or...

Display When IdleFF3
Display When Idle
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 
26# (0-39)#
DescriptionUse this program address to select a soft key menu to be displayed on the
large-display telephone during “idle” mode
ProgrammingFF3 
(l-1 6 or 1-24)# 26## (O-39)#
i’f
Extension PortCPC-S 1-16Soft-Key Menu SelectionCPC-M l-24
(see the following table for menu selections)
(see Appendix “A” for menu illustrations)
Table 3-2Available menus for idle disphy
Menu...

FF3Display When Idle
21Function screen 11 (fixed)
22Function screen 12 (fixed)
Related ProgrammingCustom Screen addresses
FFl 2# 7# l# thru 4-#
Issued 3/l /95DBS 824-l O-4003-23