Panasonic Dbs 824 Instructions Manual

Auto-Redial on txtenSlOnStt3
Auto-Redial on Extensions
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 
(ExtPort)# 48# (0 or l)#
DescriptionUse this program to activate the Auto-Redial feature on individual DBS 824
extensionsIf the Autp-Redial feature is enabled, pressing the REDIAL key
will automatically 
redial the last number dialed, whether it was an outgoing
call (system will automatically seize a trunk), another extension, or an SSD or
PSD number
The Auto-Redial feature works on...

4. Ringing and Hunt Groups (FF4)
--Use the FF4 program addresses in this chapter to set up ring assignments and
hunt group parameters
This chapter covers the following topics
d Day Ring Assignments for Hunt
ayed Night
1Ring Assignments for Hunt
Issued 3/l /95OBS 824-l O-400 

4-2DBS 824-10-400Issued 3/l/95 

CO Day Ring Assignments
Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF4 
l# (ExtPort)# (Trunk)# (0 or l)#
DescriptionThis program determines which extension(s) will receive incoming calls from
a particular trunk when the DBS 824 system is in “Day” mode
ProgrammingFF4 
l# (l-17 or l-25)# (l-6 or l-8)# (0 or l)#
/ f t
Extension Port
Trunk NumberO=Trunk does not ring
CPC-S 1-16, 17CPC-S l-6l=Trunk ringsCPC-M l-24,25CPC-M l-8
NOTE: Use port 17 (CPC-S) or port 25 (CPC-M) to assign ringing...

CO Day Ring Assignments for Hunt GroupsFF4CO Day Ring Assignments for Hunt Groups
Software VersibnCPC-S and CPC-M, Version 1 0 and higherAddress FF4 
l# (HuntGrp)# (Trunk)# (0 or l)#
DescriptionThis program determines which hunt group will receive incoming calls from
a particular trunk when the DBS 824 system is in 
‘ Day” mode
ProgrammingFF4 
1# (23-26 or 3%34)# (1-6 or l-8)# (0 or l)#
f f tHunt Groups 1 thru 4
CPCI-SCPCI-M
2331
24322
25333
26344Trunk Number
O=Trunk does not ring
1 =Trunk ringsCPC-Ml-8...

FF4CO Niqht 1 Ring Assignments
CO Night 1 Ring Assignments
Software VelSionCPC-S and CPC-M, Version 1 0 and higher
AddressFF4 2# (ExtPort)# (Trunk)# (0 or l)#
DescriptionThis program determines which extension(s) will receive incoming calls from
a particular trunk when the DBS 824 system is in “Night 1” mode
ProgrammingFF4 
2# (l-17 or l-25)# (1-6 or l-8)# (0 or l)# 
f t
Extension Port-CPC-S 1-16, 17
CPC-M l-24,25Trunk Number
CPC-S l-6
CPC-M l-8O=Trunk does not ring
l=Trunk ringsNote: Use port 17 (CPC-S)...

CO Night 1 Ring Assignments for Hunt GroupsFF4
CO Night 1 Ring Assignments for Hunt Groups
Software VersionCPC-S and CPC-M, Version 1 0 and higher
Address
FF4 2# (Hunt@rp)# (Trunk)# (0 or l)#
DescriptionThis program determines which hunt group will receive incoming calls from
a particular trunk when the DBS 824 system is in “Night 1” mode
Programming
FF4 2# (23-26 or 31934)# (1-6 or l-8)# (0 or I)#
/ f I’Hunt Groups 1 thru 4
CPC-SCPC-M
2331
24322
25333
26344Trunk Number
O=Trunk does not ring
l=Trunk...

FF4Hunt Group Pilot Numbers
Hunt Group Pilot Numbers
Software VersionCPC-S and CPC-M, Version 1 0 and higher
AddressFF4 3# (HuntGrp)# l# (11-69 or 10%699)#
DescriptionUse this program to assign a “pilot” extension number to a hunt groupThispilotnumber can be dialed from any intercom phone to reach the hunt
groupAn example is dialing “500” to reach a Voice Mail hunt group
Each hunt group must have a pilot number assigned to it in order for thehunt group application to work --including ring assignments to...

Hunt Group Pilot NumbersFF4CO Day Ring Assignments For Hunt Groups
FF4 
I# (23-26 or 31-34)#
(1 6 or l-8)# (0 or l)#CO Night 1 Ring Assignments For Hunt GroupsFF4 
2# (23-26 or 31 34)#
(l-6 or l-S)# (0 or l)#
Hunt Group TypeFF4 3# (l-4)# 2# (0-2)#Transfer Extension FF4 
3# (l-4)# 3# (loo-699)#Hunt Group MembersFF4 
3# (l-4)# (520)# (loo-699)#CO Delayed Day Ring Assignments For Hunt Groups
FF4 5# (23-26 or
31-34)# (l-6 or l-8)# (0 or l)#CO Delayed Night 1 Ring Assignments For Hunt GroupsFF4 
6## (23-26...

FF4Hunt tiroup I ype
Hunt Group Type
Software VersionCPC-S and CPC-M, Version 1 0 and higher
AddressFF4 
3# (HuntGrp)# 2# (0-2)#
DescriptionUse this program to assign one of the following search methods to a hunt
group
Terminal Hunt Group OperationIn a terminal hunt group, the hunt begins with the pilot number, and moves
sequentially through the extensions in the hunt group
If all extensions are
busy, the call camps onto the hunt group and waits for an extension to become
idle
Distributed Hunt Group...