Oce PlotWave 300 User Manual

Use FTP to send a print job
Introduction
The Océ PlotWave 300 supports printing through FTP.
If you send your print job through FTP the default Océ Express WebTools settings are
leading.
Note:
You must enable printing through FTP in the Océ Express WebTools.
How to send a print job via FTP
You can print the files through FTP in the following ways.
■Via a command line prompt
■Enter the address  ftp:// /jobs in your workstation browser.
■Via an FTP application
■From a Web browser
The Océ PlotWave 300 has a...

Use LPR to send a print job
Introduction
The Océ PlotWave 300 supports printing through LPR.
If you send your print job through LPR the default Océ Express WebTools settings are
leading.
Note:
You must enable printing through LPR in the Océ Express WebTools.
How to send a print job via LPR
Type the following line command after the DOS prompt: lpr -S 
-P  .
Note:
You can use any name for , for example jobs.
Chapter 5 - Use the printing system
162
Use LPR to send a print job
Downloaded From...

Print a job from the Smart Inbox
How to print a job from the Smart Inbox using the Océ Express WebTools
1.Select the 'Jobs' tab in the Océ Express WebTools.
2.Select the job and click 'Print'. The job is copied into the Job Queue.
Chapter 5 - Use the printing system
163
Print a job from the Smart Inbox
Downloaded From ManualsPrinter.com Manuals 

Print from a USB mass storage device or flash drive
1.Insert USB mass storage device or flash drive into the USB port on the user panel.
2.The system automatically selects the Print tab.
Note:
When the first template in the Scan tab is a Scan to USB template, the system selects the
Scan tab.
3.Open the Print tab with the confirmation button above the scroll wheel.
The contents of your USB device is displayed.
4.Use the scroll wheel to browse to the file you want to print. You can select or deselect
the...

Basic copy jobs
Introduction to copy jobs
A basic copy job only takes two steps. Feed the original face up and press the green button.
Every other type of copy job is called an extended copy job.
An extended copy job takes some additional steps, where you select a specific copy template
and, if necessary, change the predefined copy job settings on the user panel. The copy
templates are defined in the Océ Express WebTools (see ‘Define the copy job preferences
and copy templates’ on page 128). When you...

RemarksCopy/Scan-to-file set-
ting'Original'
Original document
With scan-to-file for
'Photo' the color mode
'Grayscale'" is recommend-
ed.
With copy: 'Colored origi-
nal';
With Scan-to-file: 'Col-
ored original' or 'Photo'.
Medium quality prints
Only for very dark origi-
nals (mostly coming from
old archives).
'Dark original'Dark originals and dark
transparents
The image is inversed.'Blueprint'Blueprint
Chapter 5 - Use the printing...

Feed the original
Note:
You cannot feed the original when the machine is in sleep mode. Press a button to activate
the machine.
Attention:
The scanner cannot scan an original that is thicker than 0.65 mm or rigid originals. When
you use the carrier sheet that is available as an option, ensure that the combined thickness
of both the document and carrier sheet does not exceed 0.65 mm. (see ‘Use the carrier
sheet’ on page 210)
Attention:
Do not pull back the original when it is already fed into the scanner....

Note:
You do not need to center the original precisely when 'Width detect' is set to 'Auto'. The
exact position of the original is automatically detected by the scanner.
When 'Width detect' is set to 'Standard' or 'Custom', feed the original between the
markers or exactly centered.
2.The scanner takes the original.
Note:
Depending on the selected 'Original release mode' in the Océ Express WebTools, the
scanner holds or releases the original after the scan...

Auto-feed the original
Introduction
The auto-feed functionality enables you to improve your productivity. When you activate
the auto-feed functionality, you don't need to press the green button every time you scan
a document. The scanner is activated automatically and after the scan procedure, the
scanner releases the original automatically.
You can also increase your productivity by defining the speed at which orginals of the
type 'Line/text standard' and 'Line/text draft' are...

Note:
You do not need to center the original precisely when 'Width detect' is set to 'Auto'. The
exact position of the original is automatically detected by the scanner.
When 'Width detect' is set to 'Standard' or 'Custom', feed the original between the
markers or exactly centered.
2.The scanner takes the original.
3.Press the green button twice.
You can double-click the green button or wait for the green button to light up for the
second time. As long as the...