Oce PlotWave 300 User Manual

Use the carrier sheet
Introduction
The carrier sheet is available as an option. The use of the carrier sheet depends on the
condition of your original.
When to do
You must use the carrier sheet if you want to copy or scan the following types of originals.
■An original that is smaller than A4 size.
■An original that is fragile, damaged or heavy curled.
■An original that is badly creased.
■An original that has other pieces of paper attached to it.
Attention:
When handling the carrier sheet, be very careful...

Note:
Depending on the selected 'Original release mode' in the Océ Express WebTools, the
scanner holds or releases the original after the scan procedure.
Chapter 5 - Use the printing system
172
Use the carrier sheet
Downloaded From ManualsPrinter.com Manuals 

Do a basic copy job
1.Feed the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
The 'Copy' tab is automatically activated on the user panel.
Chapter 5 - Use the printing system
173
Do a basic copy job
Downloaded From ManualsPrinter.com Manuals   

Note:
The description of the first copy template is displayed. A basic copy job uses the settings
defined in the first copy template.
2.Press the green button.
Result
You do a basic copy job in 2 steps. The basic copy job uses the settings of the first copy
template.
Chapter 5 - Use the printing system
174
Do a basic copy job
Downloaded From ManualsPrinter.com Manuals 

Extended copy jobs
Introduction to copy jobs
A basic copy job only takes two steps. Feed the original face up and press the green button.
Every other type of copy job is called an extended copy job.
An extended copy job takes some additional steps, where you select a specific copy template
and, if necessary, change the predefined copy job settings on the user panel. The copy
templates are defined in the Océ Express WebTools (see ‘Define the copy job preferences
and copy templates’ on page 128). When you...

RemarksCopy/Scan-to-file set-
ting'Original'
Original document
With scan-to-file for
'Photo' the color mode
'Grayscale'" is recommend-
ed.
With copy: 'Colored origi-
nal';
With Scan-to-file: 'Col-
ored original' or 'Photo'.
Medium quality prints
Only for very dark origi-
nals (mostly coming from
old archives).
'Dark original'Dark originals and dark
transparents
The image is inversed.'Blueprint'Blueprint
Chapter 5 - Use the printing...

Do an extended copy job
1.Feed the original face up and centered on the original feeding table.
Note:
You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner.
The 'Copy' tab is automatically activated on the user panel.
2.Open the 'Copy' tab with the confirmation button above the scroll wheel.
3.Select your copy template.
Chapter 5 - Use the printing system
177
Do an extended copy job
Downloaded From...

If you want to change the pre-defined settings of the selected copy template, use the
confirmation button to open the copy template and display an overview of the pre-defined
settings groups.
4.Scroll to the settings group you want to change.
5.■Open the settings group you want to change with the confirmation button and scroll
to the setting you want to change.
■Open this setting, scroll through the settings values and select the correct value with
the confirmation button.
■Change the other settings in...

■Select 'OK' to return to the overview of the predefined settings groups.
6.Repeat step 4 and 5 until you have set all the correct values for your copy job.
7.Press the green button.
Chapter 5 - Use the printing system
179
Do an extended copy job
Downloaded From ManualsPrinter.com Manuals 

Available settings for copy jobs
Introduction
The Océ PlotWave 300 provides a lot of settings to manage all your different copy jobs.
These settings are used for extended copy jobs. The following table gives an overview and
a very short description of the available settings. You can find a detailed description of
each setting in the Océ Express WebTools.
Settings group: 'Original'
#
FunctionSettings valuesSetting
Define the type of original you use.'Line/text standard'
'Line/text...