Oce PlotWave 300 User Manual

Configure the pen settings
Introduction
Normally the pen settings are defined in the application that is used to create a drawing.
If the pen settings are not defined in the application, the default pen settings configured
in the Océ Express WebTools are used.
Note:
Before you can edit a setting or a settings group, you must log on as Key operator.
Illustration
How to configure the pen settings
1.Click 'Configuration' - 'Pens'.
2.Click on the value of the pen number that you want to...

Define your printing system preferences
What you need to know about default settings
Definition
Before you send print jobs to the Océ PlotWave 300, remember the following.
The values defined in the Océ Express WebTools are default values for the general system
behavior. You can define a number of job settings in the Océ printer drivers or the Océ
job submission tools. The settings defined in the printer drivers or the job submission
tools always overrule the settings defined in the Océ Express WebTools....

Define the system preferences
Introduction
Before you start to use your printing system you can define the general system preferences
to fine tune it to optimally fit your company's workflow and processes.
Note:
Before you can edit a setting or a settings group, you must log on as a Key operator.
Illustration
How to define the system preferences
1.Click 'Preferences' - 'System settings'.
The system settings are grouped in functional settings groups. You can find detailed in-
formation...

#
DescriptionSettings group
Person to contact in case of error.'Contact in case of error'
The regional settings are configured during the
installation of your system. Here you can change
the initial configuration.
Note:
You can toggle between the 'First lan-
guage' and the 'Second language' on the
user panel.
Note:
Every time you change the 'Measurement
unit', the controller recalculates the values
from millimeter to inches and vice versa.
If you reverse to the original...

Define the print job preferences
Introduction
Here you can define the default values for print jobs.
If you send a print job using an Océ printer driver or an Océ job submission tool, the
job settings defined in the printer driver or the job submission tool always overrule the
default settings defined in the Océ Express WebTools.
Note:
Before you can edit a setting or a settings group, you must log on as a Key operator.
Illustration
How to define the print job preferences
1.Click 'Preferences' -...

#
Contains settings that defineSettings group
the default processing of image data.'Image'
the default positioning of the image on the printed output.'Layout'
the default media usage.'Sheet'
how the printer processes complex files.'General rasteriza-
tion settings'
how the printer interprets 'HP-GL' files.'HP-GL'
how the printer interprets 'HP-GL/2' files.'HP-GL/2'
how the printer interprets 'CalComp' files.'CalComp'
how the...

Define the default output quality for print jobs
Introduction
The Océ Express WebTools offers 2 settings to optimize the default output quality for
print jobs.
You can find these settings in the 'Preferences' - 'Print job defaults' tab.
Note:
Before you can edit a setting or a settings group, you must log on as a Key operator.
'Print optimization'
The quality of the printed output is optimized based on the content of the print file.
#
DescriptionValues
'Standard' is the...

Define the copy job preferences and copy templates
Introduction
Here you can define the general copy job settings and four copy templates.
What you need to know about copy templates
Copy templates enable you to easily perform copy jobs that you do very often. The job
templates appear on the user panel when you select 'COPY'.
With a copy template you can pre-define the settings you need for a copy job. You only
need to set the job settings once and you can store the settings in a job template that...

Illustration
How to define the copy job preferences
1.Click 'Preferences' - 'Copy job defaults'.
The system settings are grouped in functional settings groups. You can find detailed in-
formation about the settings in the tooltip.#
DescriptionSettings group
Default copy job settings that refer to all
copy jobs.
'General copy job settings'
The name and description you enter here
are visible on the user panel when you
select 'COPY'.
'Copy template 1: Name and...

DescriptionSettings group
Settings that determine the default pro-
cessing of image data and the default po-
sitioning of the image on the printed
output.
'Copy template 1: Image and layout'
Settings that determine the default media
usage.
'Copy template 1: Sheet'
Note:
You can define the same settings for copy template 2, 3 and 4.
2.Click 'Edit' in the settings group bar or click the value of a single setting.
(see ‘How to edit a setting’ on page 92)
3.Click 'Ok' to...