Oce PlotWave 300 User Manual

The 'Right' stripThe 'Left' stripThe 'Bottom' stripThe 'Top' strip
■Open a template with the confirmation button.
■Scroll to 'Erase margins' and open this setting with the confirmation button.
■Scroll to 'Top', define the value with the scroll wheel or numeric keys and confirm.
■Scroll to 'Bottom', define the value with the scroll wheel or numeric keys and confirm.
■Scroll to 'Left', define the value with the scroll wheel or numeric keys and...

Make a copy and delete a specific area of an original
Introduction
You can make a copy without a specific area of an original with the 'Erase area' setting.
You can use 2 settings to define the dimensions of the delete area and you can use 2 settings
to define the relative position of the delete area on the sheet.
Define the relative position of the delete area with the following settings.
■'Hor offset'
■'Vert offset'
Define the dimensions of the delete area
■'Width'...

#
The 'Length'The 'Width'The 'Vert offset'The 'Hor offset'
■Open a template with the confirmation button.
■Scroll to 'Erase area' and open this setting with the confirmation button.
■Scroll to 'Hor offset', define the value with the scroll wheel or numeric keys and con-
firm.
■Scroll to 'Vert offset', define the value with the scroll wheel or numeric keys and
confirm.
■Scroll to 'Width', define the value with the scroll wheel or numeric keys...

Basic scan jobs
Introduction to scan jobs
A basic scan job only takes three steps. Feed the original face up, select 'Scan' on the user
panel and press the green button. Every other type of scan job is called an extended scan
job.
An extended scan job takes some additional steps, where you select a specific scan template
and, if necessary, change the predefined scan job settings on the user panel. The scan
templates are defined in the Océ Express WebTools (see ‘Define the scan job preferences
and...

RemarksCopy/Scan-to-file set-
ting'Original'
Original document
With scan-to-file for
'Photo' the color mode
'Grayscale'" is recommend-
ed.
With copy: 'Colored origi-
nal';
With Scan-to-file: 'Col-
ored original' or 'Photo'.
Medium quality prints
Only for very dark origi-
nals (mostly coming from
old archives).
'Dark original'Dark originals and dark
transparents
The image is inversed.'Blueprint'Blueprint
Chapter 5 - Use the printing...

Feed the original
Note:
You cannot feed the original when the machine is in sleep mode. Press a button to activate
the machine.
Attention:
The scanner cannot scan an original that is thicker than 0.65 mm or rigid originals. When
you use the carrier sheet that is available as an option, ensure that the combined thickness
of both the document and carrier sheet does not exceed 0.65 mm. (see ‘Use the carrier
sheet’ on page 210)
Attention:
Do not pull back the original when it is already fed into the scanner....

Note:
You do not need to center the original precisely when 'Width detect' is set to 'Auto'. The
exact position of the original is automatically detected by the scanner.
When 'Width detect' is set to 'Standard' or 'Custom', feed the original between the
markers or exactly centered.
2.The scanner takes the original.
Note:
Depending on the selected 'Original release mode' in the Océ Express WebTools, the
scanner holds or releases the original after the scan...

Auto-feed the original
Introduction
The auto-feed functionality enables you to improve your productivity. When you activate
the auto-feed functionality, you don't need to press the green button every time you scan
a document. The scanner is activated automatically and after the scan procedure, the
scanner releases the original automatically.
You can also increase your productivity by defining the speed at which orginals of the
type 'Line/text standard' and 'Line/text draft' are...

Note:
You do not need to center the original precisely when 'Width detect' is set to 'Auto'. The
exact position of the original is automatically detected by the scanner.
When 'Width detect' is set to 'Standard' or 'Custom', feed the original between the
markers or exactly centered.
2.The scanner takes the original.
3.Press the green button twice.
You can double-click the green button or wait for the green button to light up for the
second time. As long as the...

Use the carrier sheet
Introduction
The carrier sheet is available as an option. The use of the carrier sheet depends on the
condition of your original.
When to do
You must use the carrier sheet if you want to copy or scan the following types of originals.
■An original that is smaller than A4 size.
■An original that is fragile, damaged or heavy curled.
■An original that is badly creased.
■An original that has other pieces of paper attached to it.
Attention:
When handling the carrier sheet, be very careful...