Nortel Modular Ics 6.0 System Coordinator Guide

Forwarding your calls / 111
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Canceling Line Redirection
When you are ready to resume service, use this procedure to 
cancel line redirection.
1. Press ²£¡Ý.
2. Select the lines you no longer want to be redirected. 
Allowing a telephone to redirect calls
You can use programming to determine if a set can use the 
redirect calls feature and turn it on or off.
You need the programming template found at the front of this 
guide. See Getting started with...

112 / Forwarding your calls
Modular ICS 6.0 System Coordinator Guide P0992640 03
Turning the redirect ring for a telephone on or off 
You can program a telephone to ring briefly (200 
milliseconds) when a call is redirected to one of the lines 
assigned to it. 
You need the programming template found at the front of this 
guide. See Getting started with Norstar on page 13 for more 
information.
1. Press ²¥¥ÛßßÜÝÝ.
2. Press ÛÜßÝß (the default System Coordinator 
password).
3. Press ≠ and enter the...

Forwarding your calls / 113
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Displays while canceling redirection
You have one external line on your set, but 
you need a second line to perform line 
redirection. Redirect your external line using 
a line pool as the outgoing line.
You are attempting to redirect a line and the 
line you have chosen is the outgoing line you 
have selected as a destination. You cannot 
redirect a line to itself. Select another line.
Enter a valid line pool access code....

114 / Forwarding your calls
Modular ICS 6.0 System Coordinator Guide P0992640 03
How Line Redirection is different from Call Forward
Call Forward forwards all calls that arrive at a particular 
telephone to another telephone within the Norstar system. Line 
Redirection redirects only the lines you specify, no matter 
which telephones they appear on, to a telephone outside the 
Norstar system. Line Redirection takes precedence over Call 
Forward.
Using Line Redirection
You redirect lines at a telephone,...

Forwarding your calls / 115
P0992640 03 Modular ICS 6.0 System Coordinator Guide
In certain situations, callers may experience lower volume 
levels when you redirect calls to an external location.
Centralized voice mail and auto attendant
How centralized voice mail and auto attendant systems are 
accessed, depends on which node users are attached.
Using a centralized voice mail system
If your system is part of a network that uses just one Meridian 
voice mail or Norstar voice mail system, how the users...

116 / Forwarding your calls
Modular ICS 6.0 System Coordinator Guide P0992640 03 

P0992640 03 Modular ICS 6.0 System Coordinator Guide
Communicating in the office
Paging
Paging allows you to make announcements over the Norstar 
system using the telephone speakers, or your loudspeaker 
system, if one is available.
Making a page announcement
1. Press ²ßâ.
2. Choose a page type. Page types are:
Ú through the telephone speakers (internal page)
Û through an external speaker (external page) 
Ü both internal and external (combined page)
3. If necessary, choose a zone. 
4. Make your...

118 / Communicating in the office
Modular ICS 6.0 System Coordinator Guide P0992640 03
Activating and deactivating the ability to page 
You need the programming template found at the front of this 
guide. See Getting started with Norstar on page 13 for more 
information.
1. Press ²¥¥ÛßßÜÝÝ.
2. Press ÛÜßÝß (the default System Coordinator 
password).
3. Press ≠ and enter the internal number of the 
telephone you want to program.
4. Press ≠ twice.
5. Press ‘ seven times. The display reads Paging.
6. Press...

Communicating in the office / 119
P0992640 03 Modular ICS 6.0 System Coordinator Guide
4. Press ≠ twice.
5. Press ‘ six times. The display reads Page Zone.
6. Press CHANGE
 to select the setting: 1, 2, 3,4, 5, 6 orNone.
You can make a telephone part of a page zone only if the 
telephone has paging set to Y (Yes).
A zone is any set of Norstar telephones that you want to group 
together for paging, regardless of their location. The 
maximum number of sets in a page zone is 50.
Your installer programs...

120 / Communicating in the office
Modular ICS 6.0 System Coordinator Guide P0992640 03
Using Page with external paging equipment
When you make a page that uses external paging equipment —
external page or combined page — the Long Tones feature is 
automatically activated for the external paging system only. 
This allows you to control optional equipment with the Long 
Tones feature.
Sending messages
The Messages feature allows you to leave a message on the 
display of another digital set or to analog...