Nortel Compact Ics 6.0 System Coordinator Guide

Programming Hunt Groups / 161
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Setting the hunt delay
This setting allows you to program the number of rings the system permits 
at a Hunt Group set before moving on to the next set in the Hunt Group.
1. Place the programming overlay on a T7316, M7310 or M7324 
telephone.
2. Press 
²¥¥ÛßßÜÝÝ (CONFIG). The display shows 
Password:.
3. Press 
ÛÜßÝß (ADMIN). The display shows 
Terminals&Sets.
4. Press 
‘ until the display shows System prgrming.
5. Press...

162 / Programming Hunt Groups
Com pact ICS 6.0 System Coordinator Guide P0992670 03
1. Place the programming overlay on a T7316, M7310 or M7324 
telephone.
2. Press 
²¥¥ÛßßÜÝÝ (CONFIG). The display shows 
Password:.
3. Press 
ÛÜßÝß (ADMIN). The display shows 
Terminals&Sets.
4. Press 
‘ until the display shows System prgrming.
5. Press 
≠. The display shows Hunt groups.
6. Press 
≠. The display shows Show group.
7. Enter the Hunt Group number you want to program (1-6).
8. Press 
≠. The display shows...

Programming Hunt Groups / 163
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
11. Press ¨ to exit or ‘ to continue programming.
Programming the overflow set
This setting allows you to program the overflow set to which the Hunt 
Group calls are to be routed. Unless the overflow position is a Hunt Group 
set, the call ceases to be a Hunt Group call. If the overflow set is a Hunt 
Group set, the call is treated as a new call and goes to the bottom of the 
queue.
The overflow set can be a set DN...

164 / Programming Hunt Groups
Com pact ICS 6.0 System Coordinator Guide P0992670 03
Setting the name
This setting allows you to program the Hunt Group name, such as 
SERVICE or SALES. The name can be up to seven characters in length.
1. Place the programming overlay on a T7316, M7310 or M7324 
telephone.
2. Press 
²¥¥ÛßßÜÝÝ (CONFIG). The display shows 
Password:.
3. Press 
ÛÜßÝß (ADMIN). The display shows 
Terminals&Sets.
4. Press 
‘ until the display shows System prgrming.
5. Press 
≠. The display shows...

P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Using the Hospitality features
This section describes the Hospitality Services feature which is used to 
administer room and alarm services in small to medium-sized facilities 
such as hostels, motels, or hospitals.
There are three types of sets that make up this type of system:
Common set—this telephone can be found in the lobby, office, or common 
area, and is not associated with a room. This type of set cannot access all 
of the features.
Room...

166 / Using the Hospitality features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
5. Press ≠.
6.
Desk pswd:4677 displays.
7. Press 
CHANGE. 
8.
New pswd: displays
9. Enter a new password, then press 
OK.
Cond pswd
Change this password frequently, to maintain security.
1. Place the appropriate programming overlay on the set you are using to 
do programming.
2. Press 
²¥¥ÛßßÜÝÝ (CONFIG). The display shows 
Password:.
3. Press 
ÛÜßÝß (ADMIN). The display shows 
Terminals&Sets.
4. Press 
‘ until the...

Using the Hospitality features / 167
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Programming room information
Use this setting to assign set DNs to a specific room.
1. Place the appropriate programming overlay on the set you are using to 
do programming.
2. Press 
²¥¥ÛßßÜÝÝ (CONFIG). The display shows 
Password:.
3. Press 
ÛÜßÝß (ADMIN). The display shows 
Terminals&Sets.
4. Press 
‘ until the display shows Hospitality.
5. At the Hospitality heading, press 
≠ until Room/desk info 
displays.
6....

168 / Using the Hospitality features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
4. Press ‘ until the display shows Hospitality.
5. At the Hospitality heading, press 
≠ until Call restrns 
displays.
6. Press 
≠. Vacant:00 displays.
7. Press 
CHANGE and enter the filter that defines the restrictions for your 
hospitality system. 
The Restriction Filters section in the Modular ICS 5.0 Installer Guide 
describes how to set up filters.
8. Repeat steps 2 and 3 for the other room occupancy states....

Using the Hospitality features / 169
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
7. Press CHANGE and enter the hour (00 to 23). 
If the number is less than 13, the display shows 
AM. Press CHANGE to select 
PM, if required. Press OK to accept.
8. Press 
≠. Minutes: 00 displays.
9. Press 
CHANGE and enter the minutes (00 to 59).
Using the room/set programming
This section describes how the room occupancy and room condition 
settings are used.
Setting dialing filters by room state
1. Press...

170 / Using the Hospitality features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
Using the room set
1. Press ²¡àßon a digital set 
or 
˚¥¡àßon an analog set.
2. At the prompt, set the status of the room.
Note: You may be required to enter a Room condition password.
Press 
Ú to indicate Set to srv done.
Press 
Û to indicate Set to needs srv.
The set displays the selected prompt.
3. Press 
¨ to exit.
Using the admin set
1. Press ²¡à¡.
2. Enter the Desk admin password if  you are prompted for a...