Nortel Compact Ics 6.0 System Coordinator Guide

Using System features / 201
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Viewing the active Services from a one-line display 
telephone
1. Press ²¡àâ. The first active Service displays.
2. Press 
£ to move through the active schedule.
3. Press 
¨ to exit.
Displays
You are viewing the active Services. Press £ or 
NEXT to see  the other active Services. Press ¨ 
or 
EXIT to quit.
The name of the current Restriction service 
schedule is displayed. Press
 £ or NEXT to see 
the other Ringing service...

202 / Using System features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
Services that have been turned on automatically are indicated by an asterisk 
(*) before the name on the display. You can neither manually activate nor 
cancel scheduled services, although you can override them by manually 
turning on another schedule.
The control telephone can override Services that are turned on and off 
according to a schedule at any time by entering a Services feature code, and 
selecting a different...

Using System features / 203
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
The password is a one to six-digit number.
The default System Coordinator password is 
, which is the 
same as 
ÛÜßÝß.
One password cannot be a subset of another one. For example, you cannot 
have 123 and 12345.
Using a Basic password
In addition to a System Coordinator password, there is a Basic password. 
This allows you to delegate some of the duties of being a system 
coordinator to someone else without allowing access...

204 / Using System features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
5. Press ‘ until you see Progrming pswds ˆ.
6. Press 
≠.
7. Press 
‘ until you see the name of the password you want to 
change.
8. Use 
≠, CHANGE and the dialpad to enter the new password. 
Press 
OK to accept the new password.
You cannot erase or eliminate the ability to program passwords. 
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can clear it in 
programming. The individual...

Using System features / 205
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Desk pswd
Change this password frequently, to maintain security.
At 
Hospitality:
1. Press 
≠.
2.
Desk pswd:4677 displays.
3. Press 
CHANGE. 
4.
New pswd: displays
5. Enter a new password, then press 
OK.
Cond pswd
Change this password frequently, to maintain security.
At 
Hospitality:
1. Press 
≠.
2. Press 
‘
3.Cond pswd:None displays.
4. Press 
CHANGE. 
5.
New pswd: displays
6. Enter a new password, then press 
OK.
Using...

206 / Using System features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
You cannot forward calls to a direct-dial telephone that is outside your 
Norstar system. See ‘‘Making changes to Call Forward No Answer’’ on 
page 35.
Note: ISDN terminals cannot use the Direct-Dial digit to reach a Direct-
Dial set.
Changing the direct-dial telephone assignments
Your installer or customer service representative sets up the direct-dial 
telephone.
You can change which direct-dial telephone a telephone is...

Using System features / 207
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Hotline
A hotline telephone calls a preset internal or external telephone number 
when you pick up the handset (or press the key marked Handsfree/Mute).
Bypassing a Hotline
Press a line button, or use the Pre-Dial or Automatic Dial feature before 
you pick up the handset or press the key marked Handsfree/Mute on a 
hotline telephone. See the 
Telephone Feature Card or see ‘‘Changing 
how you dial your calls’’ on page 67....

208 / Using System features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
6. Press ‘ until the display shows Hotline.
7. Press 
CHANGE to select the type of call the hotline makes: None, 
Intrnl
, or Extrnl.
Internal assigns an internal number.
External assigns an external number. If you select an external number, you 
can select the line on which the call is made: the prime line, an external line, 
a line in a line pool, or a line selected by the routing table. If you select a 
line pool, you...

Using System features / 209
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Full, in addition to the restrictions outlined for Partial lock, prevents:
Changing Set Lock programming for a telephone
You need the programming template found at the front of this guide. See 
‘‘Getting started with Norstar’’ on page 13 for more information.
1. Press 
²¥¥ÛßßÜÝÝ.
2. Press 
ÛÜßÝß (the default System Coordinator password).
3. Press 
≠ at Terminals&Sets and enter the internal number of 
the telephone you want...

210 / Using System features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
5. Press ≠.
6. Press 
‘ until the display shows Aux. ringer.
7. Use
 CHANGE to select Y (Yes) or N (No).
Your installer or customer service representative can program the auxiliary 
ringer to start ringing for incoming lines as part of Ringing Service.
Using Host System dialing signals
You can access host systems, such as private branch exchanges (PBX) 
from Norstar by using host system signaling features (also known as...