Nortel Compact Ics 6.0 System Coordinator Guide
Here you can view all the pages of manual Nortel Compact Ics 6.0 System Coordinator Guide. The Nortel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 181
Telephone features / 181 P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide Refusing to answer a call While you are on a call, you can refuse to answer a second call (including a priority call). Press ²¡Þ while your telephone is ringing. Canceling Do Not Disturb Press ²£¡Þ. Displays Using Do Not Disturb Once you turn Do Not Disturb on, calls are forwarded to the prime telephone only if there is no other telephone on which the line appears. If there is another telephone that shares the same line,...
Page 182
182 / Telephone features Com pact ICS 6.0 System Coordinator Guide P0992670 03 Using Background Music Listen to music through your telephone speaker by pressing ²¡ß. Your installer or service representative makes this feature available through programming. You need to supply a music source, such as a radio, and have it attached to your ICS. Turning Background Music off The music stops automatically if you make or answer a call or if you press ²£¡ß. Using the device attached to the internal analog...
Page 183
Telephone features / 183 P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide To make an external call using the device attached to the I-ATA, you must access an external line. To access an external line, lift the handset and enter the external access code. The external access code is 9 or the number programmed by your installer or customer service representative. The feature codes for the I-ATA the telephone use ¥ and £. If your telephone does not have ¥, press Ú instead. If your telephone does...
Page 184
184 / Telephone features Com pact ICS 6.0 System Coordinator Guide P0992670 03 Call Queuing˚•°‚⁄ Allows you to answer the first incoming external call to your telephone, while you are on a call. All other incoming callers hear a busy signal unless there is another telephone programmed to ring for the call. Camp-on˚•°¤ Allows you to reroute an external call to another Norstar system telephone. Class of Service password˚•fl° Allows you to override restrictions on the telephone or line using a Class...
Page 185
Telephone features / 185 P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide Disconnecting One PartyAllows you to disconnect one party in a three-way conference call. To disconnect a party: Enter ˚£‹ to put one caller on hold. You are connected with the other call. Replace the handset. Lift the handset and enter ˚¤. You are connected with the caller on hold. Hold˚¤ Allows you to put an active call on hold and allows it to be picked up from other telephones. When Tones are turned on, a held...
Page 186
186 / Telephone features Com pact ICS 6.0 System Coordinator Guide P0992670 03 Page˚•fl‚ Allows you to make an announcement to all Norstar telephones programmed to receive a page, as well as any other connected paging equipment. You must enter a paging zone. See ‘‘Paging’’ on page 117 for more information. Page (Intercom) ˚•fl⁄ Page (External) ˚•fl¤ Page (Intercom and External) ˚•fl‹ Pause˚•‡° Generates a 1.5-second delay in the sequence of numbers you are entering (for Tone or Pulse dialing)....
Page 187
Telephone features / 187 P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide Reply to a Ring Again signalTo connect with a Ring Again request when you are on a call (or your telephone is off-hook): Enter ˚¤. This automatically places your call on hold. To return to the caller on hold, enter ˚ ¤. To connect with a ring again request when your telephone is on-hook: Lift the handset. The Ring Again number is automatically redialed. If you do not respond to the Ring Again signal within 30...
Page 188
188 / Telephone features Com pact ICS 6.0 System Coordinator Guide P0992670 03 Using a data communication device with the I-ATA The internal analog terminal adapter (I-ATA) can connect a data communication device such as a fax machine, modem or answering machine to the Compact ICS. In some cases, these devices require additional programming to work properly. Turning off tones that can interfere with data transmissions The tones used for Held Line Reminder, Call Waiting, and Ring Again can disrupt...
Page 189
Telephone features / 189 P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide Troubleshooting for the device attached to the I-ATA Check the following before you call a repair person: Check to see that the data parameters (for example, Parity or Baud Rate) are set correctly. Ensure that tones are turned off for the I-ATA using ˚¥¡âá. Make sure you are dialling out on an intercom or external line. Use ˚Û to choose an alternate line. Contact your installer or customer service representative to...