Nortel Compact Ics 6.0 System Coordinator Guide

Using System features / 211
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
4. Press ≠.
5. Press 
‘ three times. The display shows Restrictions.
6. Press 
≠ twice.
7. Press 
‘ three times. The display shows Allow link:.
8. Press 
CHANGE to choose Y (Yes) or N (No).
Pause
²à¡
The Pause feature enters a 1.5-second delay in a dialing sequence on an 
external line. This is often required for signaling remote devices, such as 
answering machines, or when reaching through to PBX features or host...

212 / Using System features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
Long tones can be used on any call except a conference call. You can use 
internal lines of the Norstar system to activate a device connected to an 
analog terminal adapter (ATA) in another area of your office, or external 
lines to access devices outside the Norstar system.
Displays
Programmed Release
²¥¡á
The Programmed Release feature performs same function as ¨ in a 
programmed dialing sequence. When the system...

Using System features / 213
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
You can include up to three Run/Stop commands in a dialing string. The 
system ignores a fourth Run/Stop, and any digits or commands that follow 
it in a programmed dialing sequence.
Wait for Dial Tone
²¡âÝ
Wait for Dial Tone causes a sequence of numbers to pause until dial tone 
is present on the line before continuing to dial. This is useful if you must 
dial a remote system and then wait for dial tone from that system...

214 / Using System features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
the European office. Your Norstar system has a leased line to Europe with 
reduced transatlantic charges. You provide that sales representative with a 
Class of Service password that gives access to the transatlantic line. The 
sales representative can then telephone into the Norstar system from a 
hotel, enter their Class of Service password, and use the leased transatlantic 
line to make calls.
Remote users can access...

Using System features / 215
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
feature. To change the restrictions for the line, the user can enter their Class 
of Service (COS) password when the system answers with DISA, or can 
dial the DISA internal number and enter their Class of Service password.
Maintaining security
To maintain the security of your system, the following practices are 
recommended:
Warn anyone to whom you give the remote access number to keep it 
confidential.
Change Class of...

216 / Using System features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
Tones
You may hear some of the following tones while accessing Norstar 
remotely.
Using Class of Service (COS) passwords
Class of Service passwords permit controlled access to a systems resources 
both by internal and remote users. When you enter a Class of Service 
password at a telephone, the restriction filters associated with your Class of 
Service password apply, rather than the normal restriction filters. 
Similarly,...

Using System features / 217
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Changing your Class of Service
²ß¡
You must enter a Class of Service password each time you want to make a 
call that is normally restricted on a line or telephone.
To change the restriction filters on a line or telephone:
1. Press 
²ß¡.
2. Enter your six-digit COS password.
COS passwords allow you to define individual passwords and determine 
the restriction filters, and remote package associated with each.
Displays
Tip -...

218 / Using System features
Com pact ICS 6.0 System Coordinator Guide P0992670 03 

P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
General System features
The following features are available for the entire Norstar system.
Disconnect supervision
When Disconnect Supervision is assigned to a line, the Norstar system 
monitors it to detect if an external caller hangs up. This allows the system 
to release the line for other uses. Your installer or customer service 
representative assigns disconnect supervision. 
Hunt Groups
Your Norstar system now allows you to establish Hunt...

220 / General System features
Com pact ICS 6.0 System Coordinator Guide P0992670 03
Line assignment
Any of the lines in your system can be assigned to any of your telephones. 
Your installer or customer service representative assigns lines 
to telephones in Configuration programming. Lines can be assigned to 
appear only, appear and ring, or to ring only.
Usually, only the lines that are appropriate for a particular person appear at 
that person’s telephone. When a line is assigned to a telephone it is...