Nitsuko 124i/384i Software Manual

Programming (Cont’d)
➣
0401 - Tenant Group Options, Part A, Item 11: Off Hook Signaling Mode
Off Hook Signaling Mode interacts with Voice Over according to the following chart:
0401 Setting When called extension is . . . The calling extension . . . 
0 Busy on a handset call with the
second channel idle Voice Announces to the
second channel 
Busy on a handset call with the
second channel busyHears busy tone and cannot
Vo i c e  O v e r  
Busy on a handsfree call with the
second channel idleHears Voice...

Related Features
Conference
An extension user cannot Voice Over to another extension user in a Conference.
Off Hook Signaling
When a user calls an extension busy on a call, they can send an off hook signal indicating they are trying
to get through.
Programmable Function Keys
Answering a Voice Over requires a uniquely programmed Voice Over key.
Single Line Telephones
Single line telephones can only initiate Voice Over.
Tr a n s f e r
If you place a call on Hold and then Voice Over to a busy extension, the...

Volume Controls
Description
 124i Available. 384i Available.
Each keyset user can control the volume of incoming ringing, splash tone, Paging, Background Music,
Handsfree and your handset. Some keysets have two separate volume controls: a slide switch on the left side for
ringing and tones, and volume buttons for Background Music, Paging, Handsfree and the handset. Other keysets
consolidate all adjustments into the volume buttons. In either case, the user can adjust these volumes anytime
while on a...

Warning Tone For Long Conversation
Description
 124i Available —  384i Available.
The system can broadcast warning tones to a trunk caller warning them that they have been on the call too long.
The tones are just a reminder -- the user can disregard the tones and continue talking if they choose.  The outside
caller does not hear the warning tones.  In addition, warning tones do not occur for Intercom calls and incoming
trunk calls. Warning tones are not available to analog single line telephone (SLT)...

Programming (Cont’d)
No
Yes
In Program 0405 Timer
25, enter 0.In Program 0405 Timer 25, enter
the Long Conversation Alarm 2
interval (1-64800 seconds).Do you want to disable
just Long Conversation
Alarm 2? Entering 0 disables the timer -
which also disables Long
Conversation Alarm 2.No Yes
Stop
In Program 0405 TImer 24, set
the Long Conversation Alarm 1
interval (0-64800 seconds).
In Program 1005, assign
a Class of Service to the
extension.
In Program 0406
Item 3, enter 0.In Program 0406
Item 3, enter...

Related Features
Central Office Calls, Answering
Warning Tone for Long Conversation does not occur for incoming trunk calls.
Central Office Calls, Placing / Toll Restriction
Warning Tone for Long Conversation occurs for all outgoing trunk calls, regardless of how they are
placed or other outgoing restrictions.
Intercom
Warning Tone for Long Conversation does not occur for Intercom calls.
Single Line Telephones
Warning tones are not available to single line telephone (SLT) users.
Operation
Warning Tone...

Year 2000 Compliance
Description
 124i Available — unaffected by the date
change to the year 2000. The system
uses a two-digit date code entry.
Future releases will use a four-digit
date code enty. 384i Available — software prior to
3.07.25 are unaffected by the date
change to the year 2000. The system
uses a two-digit date code entry.
System software 3.07.25 or higher
use a four-digit date code entry.
The system provides Year 2000 Compliance. The change of the date from one century to the next is...

Operation
Year 2000 Compliance is automatic.
Features N-Z
Year 2000 Compliance
608   FEATURES92000SWG08   Issue 1-0 

Section 2 — Programming
92000SWG08   Issue 1-0 PROGRAMMING   609 

610   PROGRAMMING 92000SWG08  Issue 1-0