Nitsuko 124i/384i Software Manual

Introduction to Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 611
Before You Start Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  611
0000 - Maintenance Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621
0001 - Save Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

0200 - Programming Passwords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 713
0201 - Setting the Programming Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  713
0202 - Setting User Passwords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  716
0300 - Basic Hardware Setup (Part B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

0700- Toll Restriction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825
0701 - Toll Restriction Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  825
0702 - Toll Restriction Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  830
0800 - Night Service Options . . . . . . . . . . . . . . . . . . . . . . . . ....

1025 - Toll Restriction Override Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  913
1026 - Loop Key Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  914
1027 - Fixed Call Forwarding Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  916
1028 - Multiple Directory Number Key Delayed Ringing . . . . . . . . . . ....

1811 - DISA Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  987
1812 - DISA Toll Restriction Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  989
1813 - Alternate Trunk Routing for DISA Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 991
1900 - Automatic Call Distribution . . . . . . . . . . . . . . . . . . . . . . ....

3000 - Account Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1049
3001 - Account Code Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1049
3002 - Verified Account Code Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1051
    
Table of Contents
vi92000SWG08  Issue 1-0 

Introduction to ProgrammingBefore You Start Programming
Section 2 – Programming
Before Reading This Section
This section provides you with detailed information about the system programs. By changing a program, you
change the way the feature associated with that program works. In this section, you find out about each program,
the features that the program affects and how to enter the program data into system memory.
Do not start customizing your system without first reading Section 1, Features. 
When you...

Unique Programming Considerations
When entering data, there are three characteristics of a program you must consider: if the program Sorts Data,
Updates the CEU or Can be Copied. The check boxes below each program heading indicate when these options
apply. If the option applies, there is a check in the appropriate box. If the option doesn’t apply, the box is empty.
Following is a more detailed explanation of each option.
•Sorts Data - After you enter data for a program, the system spends several seconds...

How to Exit the Programming Mode
To exit the programming mode:
USER:
Enter Command>
1. DIAL
In the 124i, the system stores your entries in RAM (volatile) memory and you exit the program-
ming mode (skipping the next step).
0000:EXIT O/M MODE
Data Save?(Yes:1)
2. 1 + HOLD to save and exit
OR
HOLD to exit without saving
To back up your data to a second disk (384i only):
In system software 3.06.02 or higher, use Program 0015 - Automatic Backup to have your sys-
tem automatically back up the programmed data...

Using Keys to Move Around in the Programs
Once you enter the programming mode, use the keys in the following chart to enter data, edit data and move
around in the menus.
Keys for Entering Data
Use this key . . . When you want to . . .
0-9, * and # Enter data into a program
HOLD Complete the programming step you just made (like
pressing Enter on a PC keyboard). When a program entry
displays, press HOLD to bypass the entry without changing
it.
CONF Delete the entry to the left (like pressing Backspace on...