Nitsuko 124i/384i Software Manual

Time and Date
Description
 124i Available. 384i Available.
- Year 2000 Compliance is not avaiable - Year 2000 Compliance requires
system software 3.07.25 or higher.
The system uses Time and Date for:
Conditions
The system retains the Time and Date after a power failure or system reset.
Default Setting
Enabled.
Programming
Refer to the Programming Flowchart on the following page. 
➣0003 - Time and Date
Set the system Time and Date from your administrator’s telephone.
➣0103 - Time and Date Display Mode...

Programming (Cont’d)
Stop
In 0103, select the
new Time and Date
format (1-8). You have 8 different formats from
which to choose.Do you want to change
the way Time and Date
displays on telephone
displays? If the system prevents all
extensions from dialing Service
Code 828, this is the only way to
change the Time and Date.
In 0003, change the
system Time and Date.
In 0202 Item 1, change
the Time and Date and
MOH password. The default password is 0000.Do you want to change the
default password users dial...

Operation
To set the system Time and Date:
1. Press idle CALL key.
2. Dial 828.
3. Dial the password (normally 0000).
4. Dial two digits for the year (e.g., 92).
5. Dial two digits for the month (01-12).
6. Dial two digits for the day (01-31).
7. Dial the day of the week (0-6, 0 = Sunday, 6 = Saturday).
8. Dial two digits for the hour (24 hour clock, 13 = 1:00 PM).
9. Dial two digits for the minutes (00-60).
10. Press SPK to hang up.
Features N-Z
Time and Date
92000SWG08   Issue 1-0FEATURES   523 

Toll Restriction
Description
 124i Available — eight Toll Restriction
classes and 72 extensions. 384i Available — 15 Toll Restriction
Classes in each Tenant Group and
256 extensions.
- Digit counting (0702:4) not required
in order to use the Permit and
Restrict Code Tables.- In system software 3.05.15 and
earlier, you must enable digit
counting (0702:4) in order to use the
Permit and Restrict Code Tables.
Toll Restriction limits the numbers an extension user may dial. By allowing extensions to place...

Description (Cont’d)
•Toll Restriction for Abbreviated Dialing
Abbreviated Dialing can bypass or follow Toll Restriction.  If you allow many users to program Abbrevi-
ated Dialing, consider Toll Restricting the numbers they dial.  If only administrators can program Abbre-
viated Dialing, Toll Restriction may not be necessary.  You can separately restrict Group and Common
Abbreviated Dialing.
•Local Call Digit Counting
Use Local Call Digit Counting to limit the number of digits local callers can dial....

Programming
Start
Is trunk toll
free?For each toll free
trunk, in Program
0901 Item 19 enter 1.For each toll restricted
trunk, in program 0901
Item 19 enter 0.
Is your system
installed behind a
PBX?Review the PBX Compatibility
feature before programming
Toll Restriction.
Do you want to allow all
users within a Tenant
Group to dial certain
calls (such as 911)?In Program 0702 Item 7,
enter data into the Common
Permit Codes Table. There is
one table per tenant.
In Program 0701 Item 5,
disable (0) the...

Programming (Cont’d)
Continued
from
previous
page.
Continued
on next
page.
For a Toll Restriction
Class, do you want to
allow most calls or
restrict most calls?In 0702:5, program the Permit
Codes Tables. Each tenant
group has four tables, with 60
entries in each table.In 0702:6, program the
Restrict Codes Tables. Each
tenant group has four tables,
with 60 entries in each table.
In 0701:12, enable the
Restrict Code Table (1-4)
you want to use.In 0701:11, enable the
Permit Code Table (1-4)
you want to...

Programming (Cont’d)
Continued
from
previous
page.
Stop
Do you want to Toll
Restrict Common
Abbreviated Dialing
numbers?
In 0701:7 enter 1.In 0701:7 enter 0.
In 0701:8 enter 0.In 0701:8 enter 1.
In 0702:3 program the
maximum number of local
call digits dialed table. Each
tenant has one table, with
four entries in each table.
In 0701:3 enter 0.
Do you want to restrict the
number of digits long
distance callers can dial?
In 0701:3 select a table
entry from 0702:3.
In 0701:4 enter 0.
In 0702:4 program the...

Programming (Cont’d)
No NoYes YesYes NoNoYes
Has maximum local
digit length been
exceeded?Has maximum long
distance digit length
been exceeded?
Digits sent out over trunk.
Toll violation occurs -
system drops call.
Are digits dialed in a
Restrict Table?
Are digits dialed in a
Permit Table?
Extension user dials digits.
Start
Features N-Z
Toll Restriction
92000SWG08   Issue 1-0FEATURES   529 

Programming (Cont’d)
➣
0406 - Class of Service Options (Part A), Item 84: Account Code/Toll Restriction Operator Alert
When toll restriction is violated, determine if the operator should be notified.  (0=disable, 1=enable)
➣0701 - Toll Restriction Class, Item 1: International Call Restrict Table
For the tenant and Toll Restriction Class you select, enable (1) or disable (0) the International Call Re-
strict Table (Program 0702 - Item 1).
➣0701 - Toll Restriction Class, Item 2: International Call Permit...