Nitsuko 124i/384i Software Manual

Description (Cont’d)
•Digit Masking
Digit Masking lets you X out portions of the number dialed on the SMDR report.  A digit mask of
seven, for example, masks out all exchange codes (NNXs) and local addresses.  Digit Masking makes it
easier to keep track of calling patterns, without having to interpret each individual number.  You can also
use Digit Masking to block out access and security codes.
•Duration Monitoring
SMDR can include calls of any duration, or only those that last longer than the interval...

Description (Cont’d)
Sample SMDR Report (384i Prior to 3.07.10 and 124i Prior to Base/EXCPRU 4.02)
Sample SMDR Report (384i 3.07.10 or higher)
                                                             09/01/96 PAGE 001
   CLASS  TIME    LINE    DURATION  STATION   DIALLED No./CLI RD/COST ACCOUNT
02 POT   10:44 LINE 001   00:00:30 STA 324    12039265400           0         
03 POT   10:46 LINE 001   00:00:45 STA 324    18874521              0          
04 POT   10:47 LINE 001   00:00:29 STA 318...

Description (Cont’d)
Definitions
Call Record Number SMDR record number (consecutive)
CLASS Type of call (see Class Definitions below)
TIME Time call placed or answered.  (For Transferred calls, shows
time user picked up Transfer.) 
LINE Trunk number used for call
DURATION How long call lasted.  (For Transferred calls, shows how
long user was on call after answering the Transfer.) 
STATION Extension number of call owner (i.e., extension that first
placed or answered call)  (For Transferred calls, there...

Description (Cont’d)
SMDR Report Format (384i Prior to 3.07.10 or
124i Base/EXCPRU Prior to 4.02)
Character Position Field Definition
Header Line 1
1-62 Spaces
63-70 MM/DD/YY
71 Space 
72-75 PAGE
76 Space
77-79 Report page number (e.g., 001)
CR & LF Carriage return and line feed
Header Line 2
1-3 Spaces
4-8 CLASS
9,10 Spaces
11-14 TIME
15-18 Spaces
19-22 LINE 
23-26 Spaces 
27-34 DURATION
35,36 Spaces
37-43 STATION
44-46 Spaces
47-53 DIALED
54 Space
55-61 No./CLI
62,63 Spaces
64-70 RD/COST
71 Space
72-78...

Description (Cont’d)
SMDR Report Format (384i 3.07.10 or Higher or
124i Base/EXCPRU 4.02 or Higher)
Character Position Field Definition
Header Line 1
1-62 Spaces
63-70 MM/DD/YY (384i 3.07.25 or higher = MM/DD/YYYY)
71 Space 
72-75 PAGE
76 Space
77-79 Report page number (e.g., 001)
CR & LF
Carriage return and line feed
Header Line 2
1-3 Spaces
4-8 CLASS
9,10 Spaces
11-14 TIME
15-18 Spaces
19-22 LINE 
23-26 Spaces 
27-34 DURATION
35,36 Spaces
37-43 STATION
44-46 Spaces
47-53 DIALLED
54 Space
55-61 No./CLI...

Description (Cont’d)
     Summary Reports
Conditions
(A.) The SMDR report does not include voice Intercom calls.
(B.) SMDR requires the installation of a DCI (Data Communications Interface).  Once you designate a DCI
for SMDR, you cannot use that extension for placing and answering other data calls. SMDR and the Traf-
fic Management Reports should not use the same DCI.
(C.) The SMDR call buffer stores 320 calls.  The buffer stores calls when the SMDR device is unavailable.
When the buffer fills, each new...

Programming
Go to
Programming
Flowchart on the
next page.NoYes
ParallelSerial (DTE)
NoYes NoYes
In Program 0008, enter the SMDR
DCI port number as the alarm report
port number.
In Program 0007, enter the SMDR
DCI port number as the system report
port number.
In Program 0503, assign an unused
extension number (e.g., 500) to the DCI
port. By default, port 1 = 601.
Will SMDR printer also be used
for alarm reports?
Will SMDR printer also
be used for system
reports?
In Program 1206, initialize
the DCI port...

Programming (Cont’d) 
Continued
from previous
page.
Japanese
Selected All
Go to
Programming
Flowchart on the
next page.
In Program 1008 Item 1 for each
extension, enter 1 to include
extension on SMDR; 0 to exclude
extension from SMDR.
In Program 1008 Item 1 for
all extensions, enter 1.  Selected All
Should SMDR record
include information for all
extensions or just selected
extensions?
In Program 0901 Item 13 for each trunk,
enter 0 to include trunk on SMDR; 1 to
exclude trunk from SMDR.In Program 0901...

Programming (Cont’d)
Continued from
previous page.
Yes NoNo Yes
Go to
Programming
Flowchart on the
next page.
In Program 0404 Item 1, enter the
number of digits you want to block.  If
you enter 8, for example, SMDR Xs out
the last 8 digits dialed.
In Program 0404 Item 1, enter 0.
Do you want to block
(i.e., X out) any of the
digits on the SMDR
report. For example, you can use this feature to
block the printing of security codes. To have only long distance calls print,
for example, enter 8.
In Program...

Programming (Cont’d)
Stop
Continued
from
previous
page.
Do you want the SMDR
report to include calls
blocked by Toll Restriction?In 0404:6 Print
Item 1, enter 1.In 0404:6 Print
Item 1, enter 0.
If your system is behind a PBX,
do you want SMDR to include all
calls to the PBX or just calls using
the PBX trunk access code?In 0404:6 Print
Item 2, enter 0.In 0404:6 Print
Item 2, enter 1.
Do you want the SMDR
report to include internal
data calls?In 0404:6 Print
Item 3, enter 1.In 0404:6 Print
Item 3, enter...