Home > Nitsuko > Communications System > Nitsuko 124i/384i Software Manual

Nitsuko 124i/384i Software Manual

Here you can view all the pages of manual Nitsuko 124i/384i Software Manual. The Nitsuko manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 451

Programming
Outgoing Prime Line Preference
Yes NoYesNo
If users phone is idle, they get dial tone
on the programmed Prime Line trunk
when they lift the handset.
Stop
In Program 1008 Item 3, enter 1.
In Program 0912, deny outbound
access to all trunks except the
Prime Line trunk.
In Program 0912, assign each
extension with a Prime Line to a
different access map.In Program 0912, assign more
than one extension to the same
access map. This gives the system a maximum
of 128 outoing Prime Lines.
In Program...

Page 452

Programming (Cont’d)
Incoming Prime Line Preference
Check other Program 0909 ring groups.  If
extension rings for other ring group calls,
user cant indentify Prime Line calls.
StopIntercom Prime Line
In Program 0401 Item 8,
enter 0.In Program 0401 Item 8,
enter 1
With both Intercom and
Prime Line ringing, should
lifting the handset answer
Intercom or Prime Line?No Yes
In Program 0401 Item
13, enter 0.In Program 0401 Item
13, enter 1.When Prime Line rings,
should lifting the handset
answer the call?No...

Page 453

Programming (Cont’d)
➣
0401 - Tenant Group Options, Part A, Item 8: Incoming Call Priority
Set incoming Prime Line preference.  Enter 1 to answer ringing Prime Line; enter 0 to answer ringing In-
tercom call.
➣0401 - Tenant Group Options, Part A, Item 13: Ringing Line Preference for Trunk Calls
Enter 1 if lifting the handset should answer ringing Prime Line; enter 0 to seize idle line appearance.
➣0905 - Trunk Groups
Assign Prime Line to trunk group for outgoing Prime Line selection.  (Also see 0906 and...

Page 454

Privacy (Data)
Description
 124i Available. 384i Available.
While on a data call using an acoustic coupler, an extension user can implement Privacy to block incoming Off
Hook Signals and Barge In attempts.  The system establishes Privacy for the extension when the user presses the
programmed Privacy key.  It cancels Privacy when the user presses the Privacy key a second time or hangs up.
Privacy assures the user that they will not be interrupted during an important call.
Conditions
This feature only...

Page 455

Programming
➣
0406 - COS Options, Item 7: Privacy
In an extension’s Class of Service, enable (1) or disable (0) the ability to use a Privacy key.
➣1005 - Class of Service
Assign a Class Of Service (1-15) to an extension.
➣1006 - Programming Function Keys
Assign a Privacy key (code 1030).
Related Features
Barge In
Enabling Data Privacy prevents Barge In and other off-hook tones from interrupting the data call.
Conference, Voice Call/Privacy Release
A keyset user can release Privacy on their outside call...

Page 456

Operation
To enable Privacy for the call you are on:
Enabling Privacy blocks off-hook tones from the handset, not the speaker.
1. Press Privacy key (PGM 1006 or SC 851: 1030).
A co-worker cannot Barge In on your conversation or send Off Hook Signals.
2. (Optional) Press Privacy key again to release Privacy for the call.
The system cancels Privacy automatically when you hang up.
Features N-Z
Privacy (Data)
426   FEATURES92000SWG08   Issue 1-0 

Page 457

Private Line
Description
 124i Available. 384i Available.
A Private Line is a trunk reserved for a keyset for placing and answering calls.  A user with a Private Line al-
ways knows when important calls are for them.  Additionally, the user has their own trunk for placing calls that
is not available to others in the system.
•Incoming only
The keyset has a Private Line only for incoming calls.  The user cannot place calls on the Private Line.
•Outgoing only
The keyset has a Private Line only for...

Page 458

Programming (Cont’d)
Start
In Program 1006, make
sure extensions Private
Line is assigned to a key.In Program 0912, assign
extension to an unused Private
Line access map.
Should an
unanswered
Private Line
be routed to
Voice Mail?
In Program 0901:Items 14-17, set
the Trunk Service Type to 4.Yes
In Program 0917, assign
the DIL to the extension.
In Program 0901:Items 14-
17, set the Trunk Service
Type to 0.No
In Program 0910, assign Private
Line to an unused Private Line ring
group (i.e., just for the...

Page 459

Related Features
Call Forwarding
Private Lines do not follow Call Forwarding.
Line Preference
An extension user can have Line Preference options applied to their Private Line.
Prime Line Selection
A Private Line can also be a Prime Line.
Programmable Function Keys
You should always program a line key for each Private Line.
Single Line Telephones
Private Lines are not available on single line telephones.
Toll Restriction
Private Lines follow normal Toll Restriction.
Tr a n s f e r
An extension user can...

Page 460

Programmable Function Keys
Description
 124i Available. 384i Available.
Each keyset has Programmable Function Keys.  Programmable Function Keys simplify placing calls, answering
calls and using certain features.  You can customize the function of a keyset’s programmable keys from your ad-
ministration telephone, or the extension user can do it themselves.  Depending on your telephone, you either
have 16, 24 or 32 Programmable Function Keys. 
Refer to Tables 1-4 and 1-5 for the Programmable Function Key...
Start reading Nitsuko 124i/384i Software Manual

Related Manuals for Nitsuko 124i/384i Software Manual

All Nitsuko manuals