Nitsuko 124i/384i Software Manual

Programming
Start
Does trunk ring all extensions
the same way, for each Night
Service mode?In 0910, assign trunks
with the same ringing
patterns to the same Ring
Group.
In 0909, assign each
extension to the Ring
Group that has the
trunks that should ring
that phone.
YesNo
Should extensions have
one-button access to
ringing trunks?In 1006, assign line
keys to extensions
(code 0001-0128).
Stop
YesNo
In 0910, assign all
trunks to the same
Ring Group. See the example on
the following page.
Use data=1 to...

Programming (Cont’d)
➣
0909 - Extension Ring Group Assignment
Assign extensions to ring groups (1-128 in 384i, 1-16 in 124i).
➣0910 - Trunk Ring Group Assignment
Assign trunks to ring groups (1-128 in 384i, 1-16 in 124i).
➣1006 - Programming Function Keys
Assign function keys as line keys (codes 1-128).
Note: For incoming calls, Ring Group programming (0909/0910) overrides Access Map programming
(0911/0912)
Use the charts below to program the following example:
For this extension ...1
301  Trunk 1 rings...

Related Features
Direct Inward Line (DIL)
DILs ring extensions without being in a Ring Group.
Night Service
Ring Group programming can be different for each Night Service mode.
Programmable Function Keys
Function keys simplify answering incoming calls.
Operation
Refer to Central Office Calls, Answering.
Features N-Z
Ring Groups
92000SWG08   Issue 1-0FEATURES   443 

Ringdown Extension
Description
 124i Available — 96 extensions/virtual
extensions and 24 Hotline
assignments. 384i Available — 384 extensions/virtual
extensions and 50 Hotline
assignments (in each Tenant Group).
With a Ringdown Extension, a user can call another extension by just lifting the handset.  The call automatically
goes through — there is no need for the user to dial digits or press additional keys.  Ringdown Extensions are
frequently used for lobby phones, where the caller just lifts the...

Programming (Cont’d)
Start
Should extension be
allowed to use
ringdown?In Program 0406 Item
41, enable ringdown (1).In Program 0406 Item
41, disable ringdown (0).
In Program 1005, assign a
Class of Service that allows
ringdown to extension.
Should ringdown
occur immediately
or after a delay?In Program 0405 Item 16,
set the Ringdown
Extension Timer to 0.In Program 0405 Item 16, set
the Ringdown Extension Timer
to desired delay interval (64800
seconds max.).
In Program 1013, assign
ringdown (Hotline)...

Related Features
Call Forwarding
Ringdown Extension follows Call Forwarding.  For example, the ringdown destination can forward their
calls.  When the Ringdown Extension user lifts the handset, ringdown automatically calls the extension to
which calls are forwarded.
Call Waiting/Camp On, Callback and Off Hook Signaling
If the Ringdown Extension user hears busy tone when they lift the handset, they can Camp On to the des-
tination, leave a Callback or activate Off Hook Signaling.
Do Not Disturb
The...

Room Monitor
Description
 124i Available. 384i Available.
Room Monitor lets a keyset extension user listen to the sounds in a co-workers area.  For example, the reception-
ist could listen for sounds in the warehouse when it’s left unattended. To use Room Monitor, the initiating exten-
sion and the receiving extension must activate it.
An extension user can only Monitor one extension at a time. However, many extensions can Monitor the same
extension at the same time.
Conditions
(A.) Room Monitor is for...

Programming (Cont’d)
No Yes No Yes
Stop
In 1006, assign a Room
Monitor key (code 1025) to
both the monitoring and
monitored extension.
In 1005, assign
Class of Service
to extensions.
In 0405 Item 55,
enter 0.In 0406 Item 55,
enter 1.
In 0406 Item 54,
enter 0.In 0406 Item 54,
enter 1.
Should an extension have
to ability to be monitored by
another extension?
Should an extension be
able to initiate Room
Monitor?
Start
Features N-Z
Room Monitor
448   FEATURES92000SWG08   Issue 1-0 

Operation
You must activate Room Monitor at the extension initiating the monitor and at the extension you
want to monitor.  You can only listen to one extension at a time.
To activate Room Monitor (at the initiating extension):
1. Do not lift handset or press SPK.
2. Press Room Monitor key (PGM 1006 or SC 851: 1025).
3. Dial number of extension you want to monitor.
You can place and answer other calls while Room Monitor is active.
To activate Room Monitor (at the extension to be monitored):
1. Go to the...

Save Number Dialed
Description
 124i Available. 384i Available.
Save Number Dialed permits an extension user to save their last outside number and easily redial it later on.  For
example, an extension user can recall a busy or unanswered number without manually dialing the digits. The sys-
tem retains the saved number until the user stores a new one in its place.
Save Number Dialed saves in system memory a dialed number up to 24 digits.  The number can be any combina-
tion of digits 0-9, # and *.  The...