Nitsuko 124i/384i Software Manual

Selectable Ring Tones
Description
 124i Available. 384i Available.
An extension user can change the way calls ring their phone. Selectable Ring Tones allows an extension user to
set up unique ringing for their calls.  This is important in a crowded work area where several phones are close to-
gether.  Because their phone has a characteristic ring, the user always can tell when it’s their phone ringing.
Conditions
None
Default Setting
Enabled.
Programming
NoNo
Yes Yes
Stop
In 1005, assign
Class of...

Programming (Cont’d)
➣
0406 - COS Options, Item 59: Selectable Ring Tone Selection
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to change the incoming
ring tones.
➣0406 - COS Options, Item 86: Checking Selectable Ring Tones
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to check the Selectable
Ring Tones.
➣1005 - Class of Service
Assign a Class Of Service (1-15) to an extension.
Related Features
Single Line Telephones
Single...

Serial Call
Description
 124i Available. 384i Available.
Serial Call is a method of transferring a call so it automatically returns to the transferring extension.  Serial Call-
ing saves transferring steps between users.  For example, a Customer Service Representative (CSR) has a client
on the phone who needs technical advice.  The CSR wants to send the call to Tech Service, but needs to advise
the client of certain costs when Tech Service is done.  Rather than transferring the call back and forth, the...

Related Features
Programmable Function Keys
Serial Call requires a uniquely programmed function key.
Single Line Telephones
Serial Call is not available to single line telephones.
Tr a n s f e r
An extension user can extend (send) a call to a co-worker.
Operation
To place a Serial Call to a co-worker:
1. Place or answer trunk call.
2. Press HOLD.
3. Dial co-worker’s extension number.
Co-worker must lift handset to respond to your announcement.
4. Press Serial Call key (PGM 1006 or SC 851: 1035) but do...

Single Line Telephones
Description
 124i Available — 72 single line telephones
maximum. 384i Available — 255 single line
telephones maximum. 
- Install 2-OPX Modules in odd
numbered ports only. The system
automatically disables the next
adjacent port.- Install 2-OPX Modules in any port.
The system automatically disables
the next adjacent port.
- Analog Message Waiting lamping
not available. - Analog Message Waiting lamping is
available.
- Setting the DTMF criteria requires
Base 2.13, EXCPRU 2.18 or...

Programming
NoYes2500 Type 500 TypeONS OPX
Continued on
the following
page.
For ONS extension,
connect to ASTU port
programmed with circuit
type 3.For OPX extension,
connect to 2-OPX Module
programmed with circuit
type 9.
Refer to the Single Line Ring Options chart
provided with the Single Line Telephone
Compatibility feature.
Change the settings of
1001 Item 6 and 1008
Item 4. Do you want to
change the way the
single line telephones
ring?
For non-Voice Mail
ports, make sure 1001
Item 5 is 0.
In 1001...

Programming (Cont’d)
Continued
from
previous
page.
Do you want to change the
transmit and receive levels for
a single line telephone?
In 1001:4 choose from one
of the standard gain
settings (1-5).
Are the standard
gain settings
acceptable?
Is the Continued
Dialing feature
enabled?
In 0406:57 set option
to 0 to prevent dual
DTMF tones.
In 1005, assign a
unique COS for Dual
OPX phones only.Yes
No
Yes
Do you want to change
the sidetone level for a
single line telephone?
Yes
In 0118, change the gains
for the...

Programming (Cont’d)
➣
(384i Only) 0005 - Extension Circuit Type
Program all on-premise 500/2500 type single line telephones with circuit type 3. Program all 2-OPX
Modules with circuit type 9.
➣0115 - Analog Station (ASTU PCB) Timers
Set various timing parameters for the Analog Station PCBs. The entries you make in this program affect
all ASTU PCBs installed.
➣0116 - Tone Detection Setup
Use Items 1-10 to set the criteria for the DTMF tones received at a single line telephone.
➣0118 - Extension CODEC...

Single Line Ring Options
When you use these
settings . . .Calls ring like this . . . 
Program
1001 Item 6Program
1008 Item 4Transferred Trunk
CallDirect Inward Line Intercom Call
0 2 Long ring followed by
short pauseShort ring followed by
long pauseShort ring followed by
long pause
1 2 1 second on followed
by 1 second offShort ring followed by
long pauseShort ring followed by
long pause
Programming (Cont’d)
➣
1005 - Class of Service
Assign a unique Class of Service for Dual OPX phones only when using...

Station Message Detail Recording
Description
 124i Available. 384i Available.
-The RD/COST field and Call Costing
is only available in Base or
EXCPRU software prior to 4.02.-The RD/COST field and Call Costing
is only available in system software
prior to 3.07.10.
- Expanded ACCOUNT column is
expanded to 16 digits in Base or
EXCPRU 4.02 or higher.-The ACCOUNT column is expanded
to 16 digits in 3.07.10 or higher.
- Year 2000 Compliance: 124i is
unaffected by the Year 2000 date
change as the system uses a...