Nitsuko 124i/384i Software Manual

Operation (Cont’d)
(Older Systems)
To make a trunk-to-trunk Conference:
Keyset
1. Establish first trunk call.
This can be a call that you placed or answered.
2. Press Conference key (PGM 1006 or SC 851: 1016).
3. Establish second trunk call.
4. Press Conference key twice.
The system sets up a three-party Conference between you and the two outside parties.
5. Press CONF (TRF).
Both line keys flash. The two trunk callers can now talk to each other privately. The trunks ap-
pear busy to other extensions.
If...

TAPI Compatibility
Description
 124i Available. 384i Available — requires system software
3.04 or higher.
Basic TAPI Commands require the
Nitsuko TAPI Service Provider
1.02.02.- Basic TAPI Commands available in
both Nitsuko TAPI Driver versions.
- TAPI Enhancements require Base
2.13 and EXCPRU 2.18 or higher.- TAPI Enhancements require system
software 3.06.02.
- Additional TAPI Commands require
124i Proprietary Mode Telephony
SPV 1.00.03 (or higher) driver and
system software for Base 4.02 and
EXCPRU...

Description (Cont’d)
Basic TAPI Commands
TSPI_LINEANSWER TSPI_LINECLOSE
TSPI_LINECLOSECALL
TSPI_LINECONDITIONALMEDIADETECTION
TSPI_LINECONFIGDIALOG TSPI_LINEDIAL
TSPI_LINEGETADDRESSSTATUS TSPI_LINEGETCALLADDRESSID
TSPI_LINEGETCALLINFO TSPI_LINEGETCALLSTATUS
TSPI_LINEGETDEVCAPS TSPI_LINEGETID
TSPI_LINEGETLINEDEVSTATUS TSPI_LINEGETNUMADDRESSIDS
TSPI_LINEMAKECALL TSPI_LINENEGOTIATETSPIVERSION
TSPI_LINEOPEN TSPI_LINESETAPPSPECIFIC
TSPI_LINESETDEFAULTMEDIADETECTIONTSPI_LINEDROP
TSPI_LINEGETADDRESSCAPS...

Description (Cont’d)
Caller ID Data
Call Type Signaling Description
Trunk Call1st Ring Signal
NMBR=XXX XXXXXXX Caller’s number = 
XXX XXXXXXX
2nd Ring Signal
Intercom Call1st Ring Signal
NMBR=XXXX Caller’s number = XXXX
2nd Ring Signal
TAPI Enhancements
•When a DCI keyset answers a call, it provides the following data to the connected device:
If the incoming call data contains the Caller ID number . . .
NMBR=XXX (XXX = Caller ID number data)
If the incoming call data does not contain the Caller ID number...

Programming
➣
0419 - Class of Service Options (Part B), Item 11: TAPI Auto Idle Mode (Driver ID)
For this option:
- Enter 0 if you are installing the Nitsuko TAPI Service Provider 1.02.02 driver.
- Enter 1 if you are installing the Nitsuko 384i Proprietary Mode Telephony SPV 1.00.03 (or higher) driver.
➣1005 - Class of Service
Assign Class of Service (1-15) to extensions.
➣1006 - Programming Function Keys
Assign a Telemarketing Dial key (code 1045) to the DCI keyset. The TAPI driver is active only after...

Related Features
Computer Telephony Integration (CTI) Applications and Caller ID
The system provides Database Lookup through Caller ID and TAPI compatible third-party software
(such as Symantec’s ACT!).
Data Communications Interface (DCI)
For more information on setting up the DCI Module, turn to this feature.
Operation
TAPI operation is automatic once programmed in the phone system and enabled in the PC’s TAPI application.
Features N-Z
TAPI Compatibility
506   FEATURES92000SWG08   Issue 1-0 

Tenant Service
Description
 124i Not available. 384i Available — four Tenant Groups.
Tenant Service lets you partition the system into tenant groups so several businesses can share the same common
equipment.  Each tenant group has their own trunks, extensions, operator and other features (see the table below).
When an extension user dials 0, for example, they reach their own operator.  In addition, trunk calls in one tenant
don’t interfere with trunk calls in the other tenant.  An extension user in one...

Tenant Service Feature Interaction
This feature.. And this program...  Affect Tenant Service in the following way... 
Department Calling 0410 Extension
(Department )
Group OptionsCustomize each tenant’s Department Calling dialing
options. 
0506 Department Group
NumbersExtensions in different tenants can be in the same
Department Group, but the Department Groups always
have different pilot numbers.  An extension in one tenant
cannot dial a Department Group pilot number belonging to
another tenant. 
Door...

Tenant Service Feature Interaction
This feature.. And this program...  Affect Tenant Service in the following way... 
Ringing Line
Preference0401
 Item 13Ringing Line
Preference for Trunk
CallsFor each tenant group, select between Idle and Ringing
Line Preference for trunk calls. 
0401
 Item 12Ringing Line
Preference for
Intercom CallsFor each tenant group, select between Idle and Ringing
Line Preference for Intercom calls. 
Selectable Display
Messaging0403 Selectable Display
MessagesThe system allows up...

Tenant Service Feature Interaction
This feature.. And this program...  Affect Tenant Service in the following way... 
Voice Announce 
Unit2205 OPA Message
AssignmentYou can assign any available OPA message to any trunk in
any one of the system’s tenant groups 
2206 OPA Fax Line Ring
GroupYou can have any fax call route to any Ring Group in any
one of the system’s tenant groups 
2207 900 Preamble You can assign different 900 Preambles to the trunks in
each tenant group 
2208 VAU Password All tenant groups...